> EMC Test Equipment>EMC Receivers/EMI Analyzers

EMC Receivers/EMI Analyzers

Quick Links

Information

Viewed products

EMC Receivers/EMI Analyzers

 

EMC/EMI Testing Services         Radiated Immunity & Susceptibility        Antenna Testing            Emissions Testing

 

The EMC Shop speacializes in radiated and conducted emissions testing. For CISPR or MIL complaint EMC receivers, or precompliance EMI spectrum analyzers, The EMC Shop stocks the right EMC analyzer for your testing needs. For precompliance testing, evaluation or troubleshooting, a standard spectrum analyzer doesn't always get the job done. Electrical and magnetic disturbances are best identified using an EMC receiver/EMI analyzer with built in quasi peak detectors, noise floor extension and software features to identify electromagentic events that can occur in speeds not managed well by most spectrum analyzers.

 

Get Application Support, Pricing, Lead Time and More: Contact Form

 

EMC/EMI Measurement Equipment

EMC Receivers/EMI Analyzers Manufacutures

EMC Receivers/EMI Analyzers There are 41 products.

Subcategories

  • Precompliance EMI Test Receivers

    Browse new, used, and refurbished EMC Analyzers / EMI Receivers for Precompliance Testing today.

    The EMC Shop stocks precompliance test receivers/analyzers from a variety of manufactures such as: Narda(PMM), Rohde & Schwarz and more.

    EMC/EMI test receivers can be essential to determine the causes and effects of electromagnetic interference before the certification lab.

    Get Application Support, Pricing, Lead Time and More: Contact Form

  • Compliant EMI Test Receivers

    EMC/EMI signal analyzers will allow you to perform pre-compliance measurements and diagnostic evaluation of your products so you can find and fix problems before they enter the test chamber for certification.

    The EMC Shop carries compliant EMI test receivers to conduct full standards-compliant testing in accordance with standards such as:

    • CISPR
    • EN/IEC
    • FCC
    • ANSI
    • MIL STD
    • DO-160 and more

    In stock fully compliant EMI test receivers for ideal EMI certification measurements as required in a variety of applications.

    Get Application Support, Pricing, Lead Time and More: Contact Form

  • Electric Field Monitors

    Rent, buy or lease Electric Field Monitors for Field Strength measurements. The EMC Shop specializes in radiated immunity and susceptibility test and compliance.

  • Harmonics and Flicker Analyzers

    Rent, buy, or lease Harmonics and Flicker Measurement Analyzers. The EMC Shop specializes in voltage changes and fluctations test equipment. EMC Harmonics and Flicker measurement test equipment for pre compliance, evaluation, and troubleshooting in stock, calibrated and ready to ship today.

    See our Flicker & Harmonics Generators

    Get Application Support, Pricing, Lead Time and More: Contact Form

  • Transient Limiters

    Protect your expensive spectrum/EMI analyzer with a transient limiter. When injecting electrical disturbances on your equipment for EMC testing purposes, you risk feedback of several thousand volts into your spectrum/EMI analyzer.

  • Precision Power Quality Analyzers & Meters

    Rent Precision Power Quality Analyzers & Meters. The EMC Shop is an ISO 17025 accredited company.

per page
Showing 25 - 36 of 41 items
  • Quick view
    • Rent the Keysight (Agilent) N9038A-526-B85-RT1
    • 3 dB resolution bandwidths
    • Quasi-peak, EMI-avg, RMS-avg and diagnostic detectors
    • Meets CISPR 16-1-1: 2010 and MIL-STD-461F EMI receiver requirements
    • ±0.5 dB absolute amplitude accuracy
    • -166 dBm displayed average noise level (DANL) with preamplifier and noise floor extension
    • EMC measurements offering simultaneous detectors, signal lists, scan tables, limit lines, and correction factors
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Frequency range: 10 Hz – 30 MHz, expandable to 3/6/18 GHz by the external modules 9030, 9060, 9180
    • Very low noise floor:  < -24 dBµV in band A, < -7 dBµV in band B
    • Multi-band preselector
    • All CISPR detectors, simultaneous
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Frequency range: 100 kHz to 1.6 GHz / upgradable to 3 GHz 1)
    • Spectral purity greater than –100 dBc/Hz (at 100 kHz)
    • SWEEP from 20 ms to 1000 s
    • Detectors: auto-, min-/max.-peak, sample, RMS, average, quasi-peak 2)
    • Miscellaneous marker/Δmarker and peak functions
    • Tracking generator 3)
      • Frequency range: 5 MHz to 1.6 GHz/3 GHz 1)
      • Output level: –20 dBm to 0 dBm
    • Directly export data to USB flash drive, RS-232/USB dual interface for remote control
    • Fanless design and fast boot time

      1) with R&S®HMS-3G option/R&S®HV212 voucher 
      2) with R&S®HMS-EMC option/R&S®HV213 voucher 
      3) with R&S®HMS-TG option/R&S®HV211 voucher



    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • E7400A Series EMC Analyzer
    • Close Field Probe Set
    • Biconical Antenna
    • Log Periodic Antenna
    • Line Impedance Stabilization Network (LISN)
    • Amplifier
    • Transient Limiter with High-Pass Filter
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Rigol DSA710 100kHz to 1GHz Spectrum Analyzer
      • 100kHz to 1GHz Frequency Range
      • Displayed average noise level (DANL) <-155dBm/Hz typ. with preamplifier on
      • Minimum resolution bandwidth (RBW) 100Hz
      • Phase noise <-80dBc/Hz @10kHz offset
      • Level measurement uncertainty <1.5dB
      • 8" (800 x 480) high-definition display
      • Linear and logarithmic frequency axis
    • EMI-DSA800
      • For DSA800 Series Models
      • EMI Filter & Quasi-Peak Detector Kit
      • Option can be added by a software key
    • NFP-3
      • 30MHz to 3GHz Frequency Range
      • One set includes four types of probe, provides optimizing sensitivity and resolution
      • Minimum resolution: 2mm; able to capture near field radiation of single circuit line
      • Applicable for electromagnetic leakage testing inside the cable
    • S1210 EMIs
      • Introduces the workspace concept - Manage multiple measurements easily
      • 'Demo' mode included - Trial the software without an instrument and a licence
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • FPC1000 Low-Cost Spectrum Analyzer for Emissions Testing
      • Frequency range: 5 kHz to 1 GHz, Upgradable to 2 GHz or 3 GHz
      • Resolution bandwidth settings down to 1 Hz
      • 10.1" WXGA (1366 x 768 pixel) display
      • Wi-Fi-enabled w/ remote control (included)
      • Easy virtual control w/ iOS/Android/PC
      • Low noise floor / High max. input power
      • Receiver mode for EMI debugging on circuit boards, integrated circuits, cable shielding, etc.
    • HM6050-2 Line Impedance Simulation Network
      • Frequency range from 9 kHz to 30 MHz
      • Built-in transient limiter
      • Artificial hand connector
    • HZ540 Near Field Probes
      • Frequency range from 100 kHz to 1/3 GHz
      • Probes included (1 × Electrical Field Probe, 1 × Magnetic Field Probe, 1 × High Impedance Probe)
    • EMC PreCom
      • EMC Precompliance Software (EMC PreCom) -- EMI module part of the HMExplorer software for conducting precompliance measurements (only with HO720 USB/RS-232 or the optional HO732 Ethernet/USB interface)
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • FPC1000 Low-Cost Spectrum Analyzer for Emissions Testing
      • Frequency range: 5 kHz to 1 GHz, Upgradable to 2 GHz or 3 GHz
      • Resolution bandwidth settings down to 1 Hz
      • 10.1" WXGA (1366 x 768 pixel) display
      • Wi-Fi-enabled w/ remote control (included)
      • Easy virtual control w/ iOS/Android/PC
      • Low noise floor / High max. input power
      • Receiver mode for EMI debugging on circuit boards, integrated circuits, cable shielding, etc.
    • Teseq ISN T8 Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs
      • For use with one, two, three, or four unscreened balanced pairs
      • Refers schematic circuit example in CISPR 22/32 Figure D.3/G.3
      • Intended for connection to cable category 3 and 5
      • 1000BaseT and PoE application
      • Changeable pin-arrangements with RJ11 and RJ45
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 9 kHz - 3.2 GHz Frequency Range
    • Typical -135dBm Displayed Average Noise Level (DANL)
    • -80dBc/Hz @ 10kHz offset Phase Noise
    • Total Amplitude Uncertainty from <1.5dB
    • 100Hz Minimum Resolution Bandwidth (RBW)

    Included

    • Calibration Certificate
    • Manual
    • Power cord
    • All standard accessories
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • All-Digital IF Technology
    • 9 kHz to 7.5 GHz Frequency Range
    • Min. -161 dBm Displayed Average Noise Level (DANL)
    • Min. -98 dBc/Hz @10 kHz offset Phase Noise
    • Level Measurement Uncertainty <0.8 dB (0.3dB typ.)
    • Up to 10 Hz Minimum Resolution Bandwidth (RBW)
    • 7.5GHz Tracking Generator (DSA875-TG)
    • Advanced Measurement functions (Option)
    • EMI Filter & Quasi-Peak Detector Kit (optional)
    • VSWR Measurement Kit (optional)
    • Complete Connectivity: LAN,USB host,USB device,GPIB (option)
    • 8 Inch WVGA (800x480) Display
    • Compact Size,Light weight design

    Included

    • Calibration Certificate
    • Manual
    • Power cord
    • All standard accessories
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 9 kHz - 1.5 GHz Frequency Range
    • 8 inch WVGA Display
    • Minimum -161dBm Displayed Average Noise Level (typ)
    • Minimum <-98dBc/Hz @ 10 kHz Offset Phase NOise
    • Level Measurement Uncertainty <0.8dB
    • 10 Hz Minimum Resolution Bandwidth
    • EMI Filter and Quasi-Peak Detector Kit
    • LAN(LXI), USB Host and Device, GPIB
    • Compact size and lightweight design

    Included

    • Calibration Certificate
    • Manual
    • Power cord
    • All standard accessories
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Frequency ranges:
      • 2 Hz to 8 GHz ESW8
      • 2 Hz to 26.5 GHz ESW26
      • 2 Hz to 44 GHz ESW44
    • Compliant with CISPR16-1-1, ANSIC63.2, MIL‑STD‑461 and FCC
    • Highest dynamic range and highest accuracy for demanding certification measurement
    • Ultrafast measurements with FFT-based time domain scan
    • EMI test receiver and signal and spectrum analyzer in a single box
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • EMI test receiver and signal/spectrum analyzer combined in one box
    • Resolution bandwidths in line with CISPR
    • Weighting detectors: max. peak, min. peak, average, RMS, quasi-peak, average with meter time constant, and RMS in line with current CISPR 16-1-1 version
    • Very fast FFT-based time domain
    • Automatic test routine
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
Showing 25 - 36 of 41 items