Viewed products
Frequency range: 100 kHz to 1.6 GHz /...
New
Warning: Last items in stock!
Availability date:
Premium Spectrum Analyzer with 100 kHz to 1,6/3 GHz Bandwidth (easily upgradable by software option) and a 16,5 cm (6,5") color display. Upgradable with tracking generator and preamplifier.
You can create your R&S®HMS spectrum analyzer by combining a basic unit with any of three available options. In case of growing requirements, upgrade vouchers allow you to upgrade your instruments with all options at any point in time.
This option activates all the functions that are required for EMC precompliance measurements. The preamplifi er option has been integrated into the new R&S®HMS-EMC option. | The frequency range is increased from 1.6 GHz to 3 GHz with this option. | This option activates the tracking generator in the instrument. |
Model Overview | R&S®HMS-X with EMC Option | R&S®HMS-X Basic Unit |
Amplitude measurement range | -114 dBm to +20 dBm | -104 dBm to +20 dBm |
DANL | typ. -135 dBm | typ. -104 dBm |
Resolution bandwidth | 100 Hz to 1 MHz, 200 kHz (-3 dB), 200 Hz, 9 kHz, 120 kHz, 1 MHz (-6 dB) | 10 kHz to 1 MHz, 200 kHz (-3 dB) |
Video bandwidth | 10 Hz to 1 MHz | 1 kHz to 1 MHz |
Not only do unexpected results in test labs during EMC compliance measurements translate into extra costs, quite often they also cause a substantial delay for your project.
Rohde & Schwarz offers effective and costeffi cient tools for EMC precompliance measurements which allow you to successfully prevent possible surprises before the actual onset of a problem.
Our HMExplorer software for your EMC measurements is included with every R&S®HMS-X spectrum analyzer with activated EMC option.
Rohde & Schwarz offers product sets for your EMC precompliance measurements, which include all necessary instruments to analyse typical EMC problems. Depending on your requirements, you can choose between a 1 GHz and a 3 GHz combination.
Line impedance stabilization network for line conducted measurements LISN R&S®HM6050-2 | 1 GHz probe set R&S®HZ530 | 3 GHz probe set R&S®HZ540 (fi g. similar) |
1 GHz EMC-SET1
R&S®HMS-X Spectrum Analyzer – Specifications | |
Frequency Range | |
basic unit | 100 kHz to 1,6 GHz |
with HMS-3G (HV212) option | 100 kHz to 3 GHz |
Accuracy of the internal reference | ±2 x 10 -6 |
Temperature stability | ±2 x 10 -6 (0°C to +30 °C) |
Aging (per year) | ±1 x 10 -6 |
Frequency Counter (with HMS-EMC (HV213) option) | |
Resolution | 1 Hz |
Accuracy | ±(frequency x tolerance of reference) |
Span range | |
basic unit | 0 Hz (Zero Span), 100 Hz to 1.6 GHz |
with HMS-3G (HV212) option | 0 Hz (Zero Span), 100 Hz to 3 GHz |
Spectral purity, SSB phase noise (with HMS-EMC (HV213) option) | |
30 kHz from carrier (500 MHz, +20°C to +30 °C) | <-85 dBc/Hz |
100 kHz from carrier (500 MHz, +20°C to +30 °C) | <-100 dBc/Hz |
1 MHz from carrier (500 MHz, +20°C to +30 °C) | <-120 dBc/Hz |
Sweep time | |
f span = 0 Hz (zero span) | 2 ms to 100 s |
f span > 0 Hz 20 ms to 1000 s, min. | 20 ms per 600 MHz |
Resolution bandwidths (-3 dB) | |
basic unit | 10 kHz to 1 MHz (in 1 to 3 steps), 200 kHz |
with HMS-EMC (HV213) option | 100 Hz to 1 MHz (in 1 to 3 steps), 200 kHz |
Tolerance | |
f = 300 kHz | ±5 % typ. |
f > 1 MHz | ±10 % typ. |
Resolution bandwidths (-6 dB) | |
with HMS-EMC (HV213) option | CISPR: 200 Hz, 9 kHz, 120 kHz, 1 MHz |
Video bandwidths | |
basic unit | 1 kHz to 1 MHz (in 1 to 3 steps) |
with HMS-EMC (HV213) option | 10 Hz to 1 MHz (in 1 to 3 steps) |
Amplitude | |
Display range | Average noise level displayed up to +20 dBm |
Amplitude measurement range | |
basic unit | -104 dBm to +20 dBm (typ.) |
with HMS-EMC (HV213) option | -114 dBm to +20 dBm (typ.) |
Max. voltage at HF input | 80 V DC |
Max. power at HF input | 20 dBm (permanently), 30 dBm (temporarily for max. 3 min) |
Intermodulation-free range | |
TOI products, 2 x -20 dBm (-10 dBm ref. level) | 66 dB (typ.) (typ. +13 dBm third-order-intercept) |
signal distance =2 MHz | 60 dB (typ., +10 dBm TOI) |
signal distance >2 MHz | 66 dB (typ., +13 dBm TOI) |
DANL (displayed average noise level) (ref. level =-30 dBm, frequency range 10 MHz to 3 GHz) | |
10 kHz (RBW), 1 kHz (VBW) | -95 dBm (typ. -104 dBm) |
100 Hz (RBW), 10 Hz (VBW) with HMS-EMC (HV213) option | -115 dBm (typ. -135 dBm) |
Preamplifier with HMS-EMC (HV213) option | -124 dBm (typ.) |
Inherent spurious | |
ref.-level =-20 dBm, f >30 MHz, RBW =100 kHz | <-80 dBm |
Input related spurious (mixer level =-40 dBm) | |
Carrier offset | 1 MHz to 1.6 GHz: -70 dBc (typ.) |
1.6 GHz to 3 GHz with HMS-3G (HV212) option | -55 dBc (typ.) |
2nd harmonic receive frequency | |
Mixer level | -40 dBm -60 dBc (typ.) |
Level display | |
Reference level | -80 dBm to +20 dBm in 1 dB steps |
Display range | |
basic unit | 100 dB, 50 dB, 20 dB, 10 dB |
with HMS-EMC (HV213) option | linear |
level display error (ref. level -50 dBm, 20°C to 30 °C) | <1.5 dB (typ. 0.5 dB) |
Display scaling | |
logarithmical | dBm, dBµV, dBmV |
linear, with HMS-EMC (HV213) option | percentaged from reference level |
Measured curves | 1 curve and 1 memory curve |
Trace mathematics | A-B (curve-stored curve), B-A |
Detectors | |
basic unit | auto-, min/max. peak, sample, RMS, average |
with HMS-EMC (HV213) option | same as basic unit, quasi-peak in addition |
Marker and delta marker | |
Number of markers | 8 |
Marker functions | peak, next peak, minimum, center to marker, frequency, reference level to marker level, all marker on peak |
Marker display | |
basic unit | normal (level, logarithmic), delta marker, noise marker, normal (linear) |
mit HMS-EMC (HV213) option | (frequency) counter |
Connectors | |
HF Input | |
Connector | N socket |
Input impedance | 50 O |
VSWR (10 MHz to 3 GHz) | <1.5 (typ.) |
Tracking generator output (with R&S®HMS-TG/R&S®HV211) | |
Connector | N socket |
Output impedance | 50 O |
Frequency range | |
basic unit | 5 MHz to 1.6 GHz |
with HMS-3G (HV212) option | 5 MHz to 3 GHz |
Output level | -20 dBm to 0 dBm (in 1 dB steps) |
Trigger input | |
Connector | BNC socket (TTL) |
Trigger types | |
basic unit | free run, single trigger, external trigger |
with HMS-EMC (HV213) option | same as basic unit, video trigger in addition |
External reference input / output | |
Connectors | BNC socket |
Reference frequency | 10 MHz |
min. level (50 O) | 10 dBm |
Interfaces | |
for mass storage | 2x USB-host (type A), FAT16/32 |
for remote control | HO720 dual interface: RS-232 / USB-device (type B) |
Optional interfaces | HO732 dual interface: Ethernet (RJ45) / USB-device (type B) HO740 interface: IEEE-488 (GPIB) |
Video output | DVI-D (480p, 60Hz), HDMI compliant |
Save and recall | on internal file system (up to 10 device settings) or external USB memory (max. 4 GB) |
Additional connectors | |
Supply output for field probes | 6 V DC, max. 100 mA (2.5 mm DIN jack) |
Audio output | 3.5 mm DIN jack |
Demodulation | AM and FM (via internal speaker) |
General Characteristics | |
Display | |
screen size / type | 16.5 cm (6,5”) VGA color TFT |
resolution | 640 x 480 (LED) |
Power supply | |
AC supply | 105 V to 253 V, 50 Hz to 60 Hz, CAT II |
power consumption | 40 W (typ.) |
Safety | safety class I (EN61010-1) |
Temperature | |
operating temperature range | +5 °C to +40 °C |
storage temperature range | -20 °C to +70 °C |
Rel. humidity | 5% to 80% (without condensation) |
Mechanical data | |
dimensions (W x H x D) | 285 x 175 x 220 mm |
weight | 3.6 kg |