Compliance Standards

Compliance Standards There are 115 products.

Subcategories

International (IEC/EN)
The EMC Shop stocks IEC test equipment for compliance on commercial electronics. Rent, buy or lease test equipment for CE, UL or other compliant mark on your product. Even though there are thousands of standards for the variety of applications and industries, many EMC, EMI and RF tests refer back to the IEC/EN international compliance standards.

Application Support, Pricing, Lead Time & More: Contact Form
Product Standards
Industry specific products include electrical equipment for medical devices, automotive and transportation, and basic consumer products. The EMC Shop will help pinpoint the required test equipment for certifying or evaluating your product in order to obatin certification.
Military & Aerospace Standards
These standards establishes interface and associated verification requirements for the control of the electromagnetic interference (EMI) emission and susceptibility characteristics of electronic, electrical, and electromechanical equipment and subsystems designed or procured for use by activities and agencies of the Department of Defense (DoD).
Automotive EMC Standards
With the rise of electrical vehicles, more emphasis is given to test standards to ensure safety and functionality from component, sub assembly and complete hevicle level. The EMC shop is supplying automotive EMC test equipment for international compliance standards such as ISO 7637 and ISO 16750-2, as well as for manufacturer specific test standards. Most test standards revolve around the conducted immunity for electrical disturbances, but also include applications for wireless RF immunity and emissions.

Automotive EMC Test Equipment
RF Conducted Immunity - Bulk Current Injection (BCI) Method
Radiated Immunity Using a Stripline
Magnetic Immunity using Helmholtz Coil
Immunity to Electrical Fast Transients
Electrostatic Discharge Immunity
CISPR 25 Radiated Emissions

Get Application Support, Pricing, Lead Time and More: CONTACT FORM
CISPR Standards
CISPR Standards set for controlling electromagnetic interference in electrical and electronic devices, and is a part of the International Electrotechnical Commission (IEC).
Telecom Testing
Telecom Testing EMC requirements for information technology & telecommunication equipment.
The EMC Shop stocks electromagnetic environmental equipment for classes of telecommunication equipment covering all relevant electromagnetic environmental parameters. This Recommendation applies to telecommunication equipment installed in telecommunication centres, outdoor locations and customer premises. This is a basic EMC Recommendation for telecommunications.
ANSI/IEEE Standards
The American National Standards Institute (ANSI) is a private non-profit organization that oversees the development of voluntary consensus standards for products, services, processes, systems, and personnel in the United States.
IEEE is an organization composed of engineers, scientists, and students. The IEEE is best known for developing standards for the computer and electronics industry.
FCC Part 15
FCC Part 15 regulates low power, unlicensed devices that could cause interference to the Amateur Radio Service and vice versa.
FCC Part 15 covers an assortment of electronic equipment that generates RF energy whether it's intentional, unintentional or incidental. Amateurs will need to consider Part 15 as it relates to digital devices, computers, low-powered, unlicensed transmitters, electrical devices and any other "generic" device that might generate RF in the normal course of its operation.
Rent, buy, or lease FCC Part 15 test equipment for radiated and conducted emissions measurements. The EMC Shop stocks calibrated equipment.
FCC Part 30
The EMC Shop stocks test equipment solutions to support FCC Part 30 millimeter wave radiated emissions testing, compliance and precompliance.

View:
Grid
List

Showing 37 - 48 of 115 items

Quick view
$1,975.00
Rent Haefely PSURGE 8000/PIM 150 Ring Wave & Damp Oscillating Wave Impulse System
- Rentals ship within 1-2 business days
- Meets Immunity Compliance Standards:
  IEC 61000-4-12 Ed.1
  IEC 61000-4-18 Ed.1
  ANSI C37.90
  IEC 60255-22-1
  IEEE 1613
- 100 kHz and 1 MHz oscillation frequency from 0.2 to 4.4 kV
- Selectable source impedance of 200 Ω and 150 Ω
- Pulse repetition rate exceeds standards requirement
- Quickly launch tests from extensive Standards Library
$1,975.00
Add to cart More
Typically In Stock
Request Quote/More Info
Send Enquiry For Rent Haefely PSURGE 8000/PIM 150 Ring Wave & Damp Oscillating Wave Impulse System

Rent Haefely PSURGE 8000/PIM 150 Ring Wave & Damp Oscillating Wave Impulse System
Rentals ship within 1-2 business days
Meets Immunity Compliance Standards:
IEC 61000-4-12 Ed.1
IEC 61000-4-18 Ed.1
ANSI C37.90
IEC 60255-22-1
IEEE 1613
100 kHz and 1 MHz oscillation frequency from 0.2 to 4.4 kV
Selectable source impedance of 200 Ω and 150 Ω
Pulse repetition rate exceeds standards requirement
Quickly launch tests from extensive Standards Library
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
AH Systems BCP-614 Probe to Measure Conducted RF Currents, 10 KHz - 300 MHz
- Frequency Range: 10 KHz - 300 MHz
- Transfer Impedance: -25 to 1 dBW
- Current: 350 Amps Max
- Individually Calibrated
- FCC, MIL-STD, VDE and TEMPEST Testing
- Rugged Construction
Request Quote
More
Typically In Stock
Request Quote/More Info
Send Enquiry For AH Systems BCP-614 Probe to Measure Conducted RF Currents, 10 KHz - 300 MHz

AH Systems BCP-614 Probe to Measure Conducted RF Currents, 10 KHz - 300 MHz
Frequency Range: 10 KHz - 300 MHz
Transfer Impedance: -25 to 1 dBW
Current: 350 Amps Max
Individually Calibrated
FCC, MIL-STD, VDE and TEMPEST Testing
Rugged Construction
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
Rent Thermo Fisher Keytek ECAT Surge & Burst/EFT Simulator System
- Rentals Ship Immediately
- System Configuration:
  E103 Controller (fiber-interface for remote control)
  E411 EFT/Noise Burst Simulator to 4.4 kV (IEC 61000-4-4)
  E501B Surge Simulator to 6.6 kV (IEC 61000-4-5, ANSI C62.41 Cat. B and UL 1449 at 3kA)
  E4551A Single Phase Surge/EFT Coupler 250V rms (typ. 15 Amps)
  Input voltage: 100V to 240VAC
  Input Current: 3.5A at 100 V; 1.5A at 240 V
Request Quote
More
In Stock
Request Quote/More Info
Send Enquiry For Rent Thermo Fisher Keytek ECAT Surge & Burst/EFT Simulator System

Rent Thermo Fisher Keytek ECAT Surge & Burst/EFT Simulator System
Rentals Ship Immediately
System Configuration:
E103 Controller (fiber-interface for remote control)
E411 EFT/Noise Burst Simulator to 4.4 kV (IEC 61000-4-4)
E501B Surge Simulator to 6.6 kV (IEC 61000-4-5, ANSI C62.41 Cat. B and UL 1449 at 3kA)
E4551A Single Phase Surge/EFT Coupler 250V rms (typ. 15 Amps)
Input voltage: 100V to 240VAC
Input Current: 3.5A at 100 V; 1.5A at 240 V
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
Rent AH Systems BCP-611 10 KHz – 150 MHz Broadband Current Probe
- Measure conducted emissions from 10 KHz to 150 MHz
- Capable of measuring pulse currents up to 100 amperes
- Individually Calibrated (Transfer Impedance calibration included)
- High Current Capability (100 Amps)
- In Stock, Calibrated and Ready to Ship
- Prices are on a Per Month Basis
To Purchase AH Systems BCP-611
Request Quote
More
Typically In Stock
Request Quote/More Info
Send Enquiry For Rent AH Systems BCP-611 10 KHz – 150 MHz Broadband Current Probe

Rent AH Systems BCP-611 10 KHz – 150 MHz Broadband Current Probe
Measure conducted emissions from 10 KHz to 150 MHz
Capable of measuring pulse currents up to 100 amperes
Individually Calibrated (Transfer Impedance calibration included)
High Current Capability (100 Amps)
In Stock, Calibrated and Ready to Ship
Prices are on a Per Month Basis
To Purchase AH Systems BCP-611
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
Schloder CWG 1500 Surge Generator, 4.4 kV, 2.2 kA, EN/IEC 61000-4-5
- New Units Ship Immediately
- 2 Year Warranty
- 10% off Calibration Service for Life
- Pre-programmed test levels per EN/IEC 61000-4-5
- 32 memory locations for custom test sequences
- Built-in 16 Amp Coupling Network AC or DC up to 270V
Request Quote
More
Typically In Stock
Request Quote/More Info
Send Enquiry For Schloder CWG 1500 Surge Generator, 4.4 kV, 2.2 kA, EN/IEC 61000-4-5

Schloder CWG 1500 Surge Generator, 4.4 kV, 2.2 kA, EN/IEC 61000-4-5
New Units Ship Immediately
2 Year Warranty
10% off Calibration Service for Life
Pre-programmed test levels per EN/IEC 61000-4-5
32 memory locations for custom test sequences
Built-in 16 Amp Coupling Network AC or DC up to 270V
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
Haefely AXOS 5 Surge Impulse Generator up to 5 kV for IEC 61000-4-5
Automated test modes, software assisted test preparation, predefined test routines and visual aided test setups
Automatic generation of test report, including test parameters, test setup and test result
Compliance and pre-compliance testing of electrical products
Includes
CE marking
Product development and debugging
Compliance testing of telecom and wireless devices
Request Quote
More
Typically In Stock
Request Quote/More Info
Send Enquiry For Haefely AXOS 5 Surge Impulse Generator up to 5 kV for IEC 61000-4-5

Haefely AXOS 5 Surge Impulse Generator up to 5 kV for IEC 61000-4-5
Automated test modes, software assisted test preparation, predefined test routines and visual aided test setups
Automatic generation of test report, including test parameters, test setup and test result
Compliance and pre-compliance testing of electrical products
Includes
CE marking
Product development and debugging
Compliance testing of telecom and wireless devices
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
3ctest APS 60C30 Automotive Power Voltage Variation Simulator ISO 7637-2 Pulse 2B/4
- Up to DC 60V, 30 Amps
- ISO 7637-2 Pulse 2b, Pulse 4
- ISO 16750-2
- ISO 11452-8
- battery supply simulation and DC voltage source
Request Quote
More
Typically In Stock
Request Quote/More Info
Send Enquiry For 3ctest APS 60C30 Automotive Power Voltage Variation Simulator ISO 7637-2 Pulse 2B/4

3ctest APS 60C30 Automotive Power Voltage Variation Simulator ISO 7637-2 Pulse 2B/4
Up to DC 60V, 30 Amps
ISO 7637-2 Pulse 2b, Pulse 4
ISO 16750-2
ISO 11452-8
battery supply simulation and DC voltage source
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
3ctest APS 60C30D Four Quadrants, Double Polarity, Voltage Drop Simulator & DC Voltage Source Package
- ACS60C30 & DCP60C30 Package
- Battery Supply Simulator and Power Amplifier
- Up to DC 60V, 30 Amps
- ISO 7637-2 Pulse 2b, Pulse 4
- ISO 16750-2
- ISO 11452-8
- battery supply simulation and DC voltage source
Request Quote
More
Typically In Stock
Request Quote/More Info
Send Enquiry For 3ctest APS 60C30D Four Quadrants, Double Polarity, Voltage Drop Simulator & DC Voltage Source Package

3ctest APS 60C30D Four Quadrants, Double Polarity, Voltage Drop Simulator & DC Voltage Source Package
ACS60C30 & DCP60C30 Package
Battery Supply Simulator and Power Amplifier
Up to DC 60V, 30 Amps
ISO 7637-2 Pulse 2b, Pulse 4
ISO 16750-2
ISO 11452-8
battery supply simulation and DC voltage source
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
3ctest APS 60C30 Battery Supply Simulator/Power Amplifier with High Resolution Programmable DC Source
- Up to DC 60V, 30 Amps
- ISO 7637-2 Pulse 2b, Pulse 4
- ISO 16750-2
- ISO 11452-8
- battery supply simulation and DC voltage source
Request Quote
More
Inquire for Qty In Stock
Request Quote/More Info
Send Enquiry For 3ctest APS 60C30 Battery Supply Simulator/Power Amplifier with High Resolution Programmable DC Source

3ctest APS 60C30 Battery Supply Simulator/Power Amplifier with High Resolution Programmable DC Source
Up to DC 60V, 30 Amps
ISO 7637-2 Pulse 2b, Pulse 4
ISO 16750-2
ISO 11452-8
battery supply simulation and DC voltage source
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
Dressler T4 CDN for Unshielded Symmetrical Telecom Lines 150 kHz-230 MHz
- Surge Testing of Unshielded Symmetrical Telecom Lines
- Complies with IEC 61000-4-6
- Easy to use Bench Top Housing
- 4 Inserts
Request Quote
More
Typically In Stock
Request Quote/More Info
Send Enquiry For Dressler T4 CDN for Unshielded Symmetrical Telecom Lines 150 kHz-230 MHz

Dressler T4 CDN for Unshielded Symmetrical Telecom Lines 150 kHz-230 MHz
Surge Testing of Unshielded Symmetrical Telecom Lines
Complies with IEC 61000-4-6
Easy to use Bench Top Housing
4 Inserts
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
Com-Power CDN-M125E Coupling Decoupling Network
- 150 MHz - 230 MHz Fequency Range
- Includes
  ADA-515-2, 150 Ohm to 50 Ohm Adapter (Recommended Add-on - non-standard)
  TEP-050, 50 Ohm Terminator (Recommended Add-on - non-standard)
- Designed for EN/IEC 61000-4-6
- Single conductor power sable
- Calibration & 3-Year Warranty
Request Quote
More
1 Unit In Stock
Request Quote/More Info
Send Enquiry For Com-Power CDN-M125E Coupling Decoupling Network

Com-Power CDN-M125E Coupling Decoupling Network
150 MHz - 230 MHz Fequency Range
Includes
ADA-515-2, 150 Ohm to 50 Ohm Adapter (Recommended Add-on - non-standard)
TEP-050, 50 Ohm Terminator (Recommended Add-on - non-standard)
Designed for EN/IEC 61000-4-6
Single conductor power sable
Calibration & 3-Year Warranty
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
AH Systems BCP-610 High Power RF Current Probe, 20 Hz - 20 MHz
- Measures currents on 50 Hz, 60 Hz and 400 Hz powerlines
- 400 Amps Max (up to 400 Hz); 5,000 Amps Pulse
- Transfer Impedance: -63 to -28 dBW
- Suitable for IEC 61000-4-16, IEC 61000-4-19 Annex C, SAE J1113-2, ISO 11452-8, DO 160D/E Section 18 and MIL-STD-461 D/E CS101, CS109 and RS101
- Individually Calibrated (Transfer Impedance calibration included)
- Split Type Clamp-on Design
Request Quote
More
Typically In Stock
Request Quote/More Info
Send Enquiry For AH Systems BCP-610 High Power RF Current Probe, 20 Hz - 20 MHz

AH Systems BCP-610 High Power RF Current Probe, 20 Hz - 20 MHz
Measures currents on 50 Hz, 60 Hz and 400 Hz powerlines
400 Amps Max (up to 400 Hz); 5,000 Amps Pulse
Transfer Impedance: -63 to -28 dBW
Suitable for IEC 61000-4-16, IEC 61000-4-19 Annex C, SAE J1113-2, ISO 11452-8, DO 160D/E Section 18 and MIL-STD-461 D/E CS101, CS109 and RS101
Individually Calibrated (Transfer Impedance calibration included)
Split Type Clamp-on Design
First Name Last Name Email Phone Subject Message or
Add to Compare

Showing 37 - 48 of 115 items