> EMC Test Equipment>Transient Generators>Medical/Commercial Transient Generators>Surge & Burst/EFT Generators>Rent Thermo Fisher Keytek ECAT Surge & Burst/EFT Simulator System

Surge & Burst/EFT Generators

Quick Links

Information

Viewed products

Rent Thermo Fisher Keytek ECAT Surge & Burst/EFT Simulator System View larger

Rent Thermo Fisher Keytek ECAT Surge & Burst/EFT Simulator System

Used

  • Rentals Ship Immediately
  • System Configuration:
    • E103 Controller (fiber-interface for remote control)
    • E411 EFT/Noise Burst Simulator to 4.4 kV (IEC 61000-4-4)
    • E501B Surge Simulator to 6.6 kV (IEC 61000-4-5, ANSI C62.41 Cat. B and UL 1449 at 3kA)
    • E4551A Single Phase Surge/EFT Coupler 250V rms (typ. 15 Amps)
    • Input voltage: 100V to 240VAC
    • Input Current: 3.5A at 100 V; 1.5A at 240 V

More details

Request Quote

Request Quote/More Info

PDF Downloads

Datasheet: Keytek ECAT System

PDF Downloads (106.9k)

Specifications

Standards MetIEC 6100-4-5, ANSI/IEEE C62.41 Cat. B, UL 1449 (8/98) , IEC 61000-4-4
Pulse voltage (open circuit)1.2/50µs, 200V - 6.6kV -5 +10% in 1 volt steps
Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse)
Pulse conforms to IEC/EN 61000-4-5
ParameterValue
Pulse current (short circuit)8/20µs, 100A - 3.3kA -0 +10% with 2 ohm effective source impedance.
Coupling1 PH / 15 (16) Amps
Repetition timeAdjustable from 300ms to 5s; 1ms resolution
Pulse repetition1 shot/12 seconds; Rise Time Tolerance ±30% for voltage; ±20% for current
Phase synchronization±15° with optional coupler/decoupler
CouplingModel E4551 - Single Phase 15 Amps
Test duration±20% Tolerance
Test duration1.0ms to 20ms; 1.0ms resolution or 1 to 200 pulses
Burst (EFT) 5/50 ns
Pulse conforms to IEC/EN 61000-4-4
ParameterValue
Pulse amplitude200V to 4.4kV (5V Steps
Burst frequencyAdjustable from 1kHz to 1MHz up to 4.4kV
PolarityPositive, negative, alternating
Burst time1 to 360 sec.; 1 sec. resolution 1 to 240 min.; 1 min. resolution 1 to 24 hours; 1 hour resolution

Test Equipment Description

How to Rent the ECAT System:

  • Click "Add to Cart" above
  • Shipping Section - Select "Use My Account" - we ship this system freight to keep it upright. Indicate in the Notes section if you'd like us to facilitate shipment or if your logistics team will do so.
  • Checkout Accordingly
  • An EMC Shop representative will contact you with shipping estimates or logistics details.

About the Keytek ECAT System:

The Thermo Fisher Keytek ECAT Simulator systems are a sesoned favorite being used for electromagnetic Surge and EFT testing for more than 2 decades. The controller has an easy-to-use Windows based application software for quick implementation of test routines and standards, with automoatic report generation. A multi-level system interlock architecture provides maximum safety to keep first time users safe.

This rental ECAT system is suitable for users looking to evaluate DUT in a precompliance environment for passing Surge and Burst (Electrical Fast Transient) immunity test standards such as IEC 61000-4-4, IEC 61000-4-5 and ANSI C62.41. The single phase, 15 amp coupling network is suitable for most commercial electronics and lower powered electronics.

ECAT EFT/Surge Simulator Configuration:

  • E103 Controller (fiber-interface for remote control)
  • E411 EFT/Noise Burst Simulator to 4.4 kV (IEC 61000-4-4)
  • E501B Surge Simulator to 6.6 kV (IEC 61000-4-5, ANSI C62.41 Cat. B and UL 1449 at 3kA)
  • E4551A Single Phase Surge/EFT Coupler 250V rms (typ. 15 Amps)
  • Input voltage: 100V to 240VAC
  • Input Current: 3.5A at 100 V; 1.5A at 240 V
  • User Manual
  • NIST Calibration Certificate

Associated EMC Test Equipment

25 other products in the same category: