4 kV Surge Generators

Quick Links

Information

Viewed products

Schloder CWG 1500...
New Units Ship Immediately 2 Year...

View larger

Schloder CWG 1500 Surge Generator, 4.4 kV, 2.2 kA, EN/IEC 61000-4-5

Condition New

New Units Ship Immediately
2 Year Warranty
10% off Calibration Service for Life
Pre-programmed test levels per EN/IEC 61000-4-5
32 memory locations for custom test sequences
Built-in 16 Amp Coupling Network AC or DC up to 270V

The EMC Shop

More details

Typically In Stock

Request Quote

Request Quote/More Info

Send to a friend
Send to a friend
Schloder CWG 1500 Surge Generator, 4.4 kV, 2.2 kA, EN/IEC 61000-4-5
New Units Ship Immediately
2 Year Warranty
10% off Calibration Service for Life
Pre-programmed test levels per EN/IEC 61000-4-5
32 memory locations for custom test sequences
Built-in 16 Amp Coupling Network AC or DC up to 270V
Recipient :
Name of your friend ^* :
E-mail address of your friend ^* :
^* Required fields
or Cancel
Print

PDF Downloads

Schloder CWG 1500 Data Sheet

PDF Downloads (319.16k)

Specifications

Supply Voltage	100-240 V / 47-63 Hz / 100 VA
Pulse voltage (open circuit)	0.2 - 4.4 kV
Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse) Pulse conforms to IEC/EN 61000-4-5
Parameter	Value
Pulse current (short circuit)	0.1 - 2.2 kA
Coupling	Integrated Single Phase: Nominal voltage 230 V / 50/60 Hz or 270 V DC, 16 A AC or DC
Pulse repetition	1 - 999
Polarity	pos / neg / alternate
Phase synchronization	0 - 359°, step 1° net sync. triggering
Test duration	10 - 990 sec
Input	100-240 V / 47-63 Hz / 100 VA
Output	Surge voltage Pulse shape 1,2 / 50 µs (IEC 61000-4-5) Surge current Pulse shape 8 / 20 µs (IEC 61000-4-5)
Dimensions	19” – housing, 3 HE
Weight	18 kg
Connectors	Additional lab- terminals
Display Interface	Front Pannel
USB Input	No

Test Equipment Description

The Schloder test generator CWG 1500 simulates high energy interference impulses. It can be used for EMC tests on installations and equipment according to the standards IEC 61000-4-5, 2014 and EN 61000-4-5, 2014

The CWG 1500 is a combined surge current / voltage generator creating at idle mode a standard surge voltage with the pulse shape 1,2 / 50 µs and a surge current with the pulse shape 8 / 20 µs. The values for voltage and current are displayed, for oscillographic investigations BNC-jacks for voltage and current monitoring are located on the rear. With the built-in single-phase coupling network the interference impulses of the surge generator can be coupled on the mains of the connected EUT’s.

All parameters can be adjusted easily and clearly. With the aid of the memory key up to 32 adjustments can be directly activated - via serial interface the generator can also be operated by a personal computer.