Line Impedance Stabilization Networks (LISN's)

Quick Links

Information

Viewed products

Line Impedance Stabilization Networks (LISN's)

 

Rental Information          ISO 17025 Lab          BCI Test Equipment            EMC Test Tables

 

Isolate your DUT (device under test) and provide a stable impedance during your conducted emission testing. Use a line impedance stabilization network (LISN) for pre-compliance evaluation or certification testing for IEC/EN, Mil-STD and other international compliance standards. The EMC Shop is an ISO 17025 accredited company, stocking 1ph and 3ph Line Impedance Stabilization Networks (LISN's) for immediate shipment.

 

Get Application Support, Pricing, Lead Time and More: Contact Form

Line Impedance Stabilization Networks (LISN's) There are 73 products.

Subcategories

  • Impedance Stabilization Networks (ISN's)

    Impedance stabilization networks (ISN's) are similar to LISN's but used for conducted emissions measurements on signal and data lines. They differ from LISN's in that they can perform Comon-Mode impedance measurements. CISPR 22 and CISPR 32 are common standards requiring the use of an ISN.

    ISN's are referred to as an asymmetric artificial network (AAN) in CISPR 16-1-2.

  • MIL-STD-461 LISN's

    The EMC Shop specializes in MIL-STD-461 and other military compliance testing. Stocking sets of LISN's rated for up to 200 amps, customers can rent or buy line impedance stabilization networks for MIL-STD-461 online, and receive the equipment to begin testing immediately.

  • CISPR 16 LISN's

    The EMC Shop specializes in immunity and emissions compliance testing, evlaution and consulting for product developers, electrical engineers and other R&D work. While LISN's aren't essential for precompliance testing and product debugging, utilizing them to ensure consistent impedance throughout will help ensure reliable and consistent test data. Rent, buy or lease CISPR 16 LISN's - Line Impedance Stabilization Networks. 

  • CISPR 25 / ISO 7637 Automotive LISN's

    The EMC Shop specializes in automotive emissions compliance testing and evaluation. Rent, buy or lease CISPR 25 / ISO 7637 Automotive  - Line Impedance Stabilization Networks. 

    CISPR 25 / ISO 7637 Automotive LISN Test Setup

    CISPR 25 / ISO 7637 Automotive LISN Test Setup

  • RTCA / DO-160 LISN's

    The EMC Shop specializes in emissions compliance testing and evaluation. Rent, buy or lease RTCA / DO-160 LISN's - Line Impedance Stabilization Networks. 

  • ANSI C63.4 LISN's

    The EMC Shop specializes in emissions compliance testing and evaluation. Rent, buy or lease ANSI C63.4 LISN's - Line Impedance Stabilization Networks. 

  • FCC Part 15 LISN's

    The EMC Shop specializes in emissions compliance testing and evaluation. Rent, buy or lease FCC Part 15 LISN's - Line Impedance Stabilization Networks.

  • Three Phase LISN 's

     

    EMC/EMI Testing Services          Radiated Immunity & Susceptibility           Antenna Testing            Emissions Testing

     

    The EMC Shop stocks most test equipment needed for compliance testing. Rent, buy or lease three phase LISN's, line impedance stabilization networks per CISPR 16.  Electromagnetic compatibility (EMC) test equipment is used to evaluate the electrical conducted or wireless performance and integrity of any product, from automobiles to furniture.

     

    Get Application Support, Pricing, Lead Time and More: Contact Form

     



per page
Showing 49 - 60 of 73 items
    • PV LISN
    • 1500 V
    • 50 A
    • Common Mode Impedance 150 Ohm
    • Z differential mode = 100 Ohm
    • air coils 280 microhenry
    • PVDC 8300 Opt. Fans
    • Fans for a maximum continuous current of 100 A
    In Stock
    Request Quote/More Info
    • 9kHz-30MHz
    • V LISN
    • CISPR 16-1-2 ANSI C63.4 FCC, ETS, VCCI and VDE, MIL461E/F
    • N type /BNC Connector option
    In Stock
    Request Quote/More Info
    • Price is for a pair of LI-550A LISN's
    • Fully compliant to CISPR 16-1-2 / CISPR 25
    • "Air-core" inductors to prevent saturation
    • Provides a near 1:1 (<0.5 dB insertion loss) 50Ω coaxial measurement port (type-N)
    • Provides a defined, stable, impedance to the Equipment Under Test (EUT)
    • Individual Calibration Included
    • Three Year Warranty
    Typically In Stock
    Request Quote/More Info
    • 10 kHz to 400 MHz Frequency Range
    • Price is for a pair of LI-125A line impedance stabilization networks
    • Frequency range of 10 kHz to 400 MHz
    • Fully compliant with DO-160/ MIL-STD 461
    • “Air-core” inductors to prevent saturation
    • Individual Calibration Included
    • Three-Year Warranty
    Typically In Stock
    Request Quote/More Info
    • Price is for a pair of LI-125A line impedance stabilization networks
    • Frequency Range: 150 kHz to 30 MHz
    • Integral Transient Limiter/10 dB Attenuator with
    • ON/OFF (bypass) Switch
    • Fully Compliant with CISPR 16-1-2/ANSI C63.4
    • Dual-Conductor Network with Universal Power
    • Receptacle to accept any EUT Plug
    • 20 Amps Current Handling Capability
    • Three-Year Warranty
    Typically In Stock
    Request Quote/More Info
    • 9 kHz a 30 MHz frequency range
    • 63 A max output current
    • Large baseplate for optimal grounding
    • Local and remote control for PMM EMI receivers
    • Meets the requirements of several standards including IEC 60309, UL1682, UL1686
    Typically Stocked
    Request Quote/More Info
    • 9 kHz to 30 MHz frequency range
    • Up to 300 A (continuous); 500 A (20 min.) rated output current
    • Suitable for DC to 60 Hz power lines
    • Built-in, selectable 250 µH coil (Choke)
    • Meets the requirements of several standards including CISPR 16-1-2, VDE 0876, FCC part 15, MIL-STD 461F
    • Fan air cooling
    • Available in single phase unit (see data sheet L1-500)
    Typically Stocked
    Request Quote/More Info
    • 9 kHz a 30 MHz frequency range
    • 63 A max output current
    • Large baseplate for optimal grounding
    • Local and remote control for PMM EMI receivers
    • Meets the requirements of several standards including CISPR 16-1-2, VDE 0876, FCC part 15
    Typically Stocked
    Request Quote/More Info
    • 9 kHz to 30 MHz frequency range
    • Up to 16 A continuous rated output current
    • Suitable for DC to 60 Hz power lines
    • Built-in, selectable 150 kHz high pass filter
    • Artificial Hand circuit
    • Local and remote control from PMM EMI receivers
    • Meets the requirements of several standards including CISPR 16-1-2, VDE 0876, FCC part 15, MIL-STD 461F
    Typically Stocked
    Request Quote/More Info
    • 100 kHz to 200 MHz frequency range
    • Multi standard design
    • 150 A max output current
    • Suitable also for DC lines
    • Large baseplate for optimal grounding
    • Robust, compact construction
    • Screw terminals for safe wiring
    • Meets the requirements of several standards including CISPR 16-1-2, CISPR 25,
    • ISO 11452-2/4/5, ISO 7637-2, MIL-STD-461F, DO-160, ED-14G
    Typically Stocked
    Request Quote/More Info
  • Inquire for Qty In Stock
    Request Quote/More Info
    • Frequency Range: 50 - 800Hz
    • Current Rating: 50 Amps
    • Fully Compliant with DO-160F
    Inquire for Qty In Stock
    Request Quote/More Info
Showing 49 - 60 of 73 items