CS115 Purpose
Conducted Susceptibility, bulk cable injection, impulse excitation
This test procedure is used to verify the ability of the EUT to withstand impulse signals coupled onto EUT associated cabling.
Test Equipment
The test equipment shall be as follows:
a. Pulse generator, 50 ohm, charged line (coaxial)
b. Current injection probe
c. Drive cable, 50 ohm, 2 meters, 0.5 dB or less insertion loss at 500 MHz
d. Current probe
e. Calibration fixture: coaxial transmiss
ion line with 50 ohm characteristic impedance,
coaxial connections on both ends, and space for an injection probe around the center
conductor.
f. Oscilloscope, 50 ohm input impedance
g. Attenuators, 50 ohm
h. Coaxial loads, 50 ohm
i. LISNs
Get Application Support, Pricing, Lead Time and More: Contact Form
