SS6G-50 800 MHz - 6 GHz, 50 Watt RF Amplifier for IEC 61000-4-3

The SS6G-50 is a  linear GaN RF amplifier features instantaneous bandwidth from 800 MHz to 6 GHz. This Class AB GaN amplifier provide a minimum of 50 watts of output power (P1dB) with a gain of 47 dB. Suitable for radiated immunity system upgrades to achieve higher field srengths or extend frequency capability from 800 MHz to 6 GHz such as in IEC/EN 61000-4-3.

The RF amplifier requires a 100 - 240 AC voltage to operate. The amplifier can be used with a wide range of modulation standards and has built-in protection circuits and therefore provides high reliability.

SS6G-50 Features:

• Operating Frequency Range: 800 MHz - 6 GHz
• Power Output: 50 Watts
• Power Gain: 47 dB min
• Power Gain Flatness: 3.0 dB p-p max constant input power
• Input Return Loss: -10 dB max
• 2 Tone Intermodulation: -30 dBc typical
• Harmonics: -20 dBc typical at rated output
• Spurious: -60 dBc max non-harmonic
• Max input Power: +8 dBm max
• Load VSWR Protection: 4:1: max

SS6G-50 Interface:

1. ONLINE/STANDYBY: HPA ON/OFF.
2. Watt/dBm: OUTPUT POWER UNIT.
3. TABLE: HPA State Table.
4. ALC: Auto Level Control.
5. FAULT: Display alarm messages.
6. COMM: Set the communication method.
7. Display Forward Output Power dBm or W.
8. Output Power Unit dBm or W.
9. Display Reflected Output Power dBm or W.
10. Display VSWR Value.
11. Display Fault or Clear State.
12. Display Standby or Online State.
13. Display Output Power Average or Peak.