The EMC Shop stocks IEC test equipment for compliance on commercial electronics. Rent, buy or lease test equipment for CE, UL or other compliant mark on your product. Even though there are thousands of standards for the variety of applications and industries, many EMC, EMI and RF tests refer back to the IEC/EN international compliance standards.
Application Support, Pricing, Lead Time & More: Contact Form 
Subcategories
Meet harmonics and flicker test standards IEC 61000-3-3 using the same power source. "Electromagnetic compatibility (EMC) - Part 3-2 Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)"
Equipment can be grouped into one of 4 classes based on the following criteria as evaluated by the IEC committee members:
After all the above criteria are taken into consideration equipment are classified as follows:
Get EMC Compliance Standards Support, Pricing, Lead Time and More: Contact Form
EN/IEC 61000-3-3: Limitation of voltage changes, fluctuations and flicker in public low-voltage supply systems
Rent, buy or lease test equipment for IEC 61000-3-11 Flicker Compatibility High Current Supply Systems. The EMC Shop specializes in electrical and wireless testing and compliance.
Rent, buy or lease test equipment for IEC / EN 61000-3-12 Harmonics Compatibility High Current Supply Systems. The EMC Shop specializes in electrical and wireless testing and compliance.
Learn more about IEC/EN 61000-4-2 electrostatic discharge immunity.
The EMC Shop specializes in CE Marking, conducted and radiated immunity test solutions. Rent, buy or lease electrostatic discharge generators per IEC 61000-4-2 and ship today.
Measurement Parameters:
All IEC 61000-4-2 purchased new or used, or rented include:
Get ESD Immunity and IEC 61000-4-2 Support, Pricing, Lead Time and More: Contact Form
EMC/EMI Testing Services Radiated Immunity Testing Emissions Testing (RF, RE, CE)
The EMC Shop will configure a turnkey test system to allow for radiated immunity and susceptibility to any field strength and any frequency range inside or outside the IEC 61000-4-3 requirement. Rent or purchase, new or used, EMC testing equipment to certify and comply to EN/IEC 61000-4-3: Radio Frequency (RF) Immunity Test. The EMC shop specializes in fully compliant test soultions.
EMC testing equipment to certify and comply to EN/IEC 61000-4-4: Electrical Fast Transient (EFT)/Burst Immunity Test. Rent or buy transient generators for electrical fast transient/burst test at The EMC Shop. Order online or contact us for stock status or application support.
Video Overview: Intro to EFT - Setting up Generator and Coupling Clamp
Get Application Support, Pricing, Lead Time and More: Contact Form
Transient generators are typically benchtop, but heavy equipment. When doing testing on three phase power lines systems usually require much larger coupling/decoupling networks which substantially increase system size. EM test environments with ground planes with connections to earth are required to safely use transient generators.
The EMC Shop stocks Combination Wave/Surge generators capable of outputting up to 30,000 Volts to simulate the most vigorous of lightning strikes.
Rent, buy or lease EMC testing equipment to certify and comply to EN/IEC 61000-4-5: Surge Immunity. The EMC shop specializes in conducted immunity and compliance testing.
Get Application Support, Pricing, Lead Time and More: Contact Form
EMC/EMI Testing Services Radiated Immunity & Susceptibility Antenna Testing Emissions Testing
The EMC Shop rents this test equipment, allowing for preliminary testing and evaluation before attempting to certify the product. The IEC/EN 61000-4-6 test standard should be purchased, read and followed to develop a suitable test plan and effectively evaluate your product.
EN/IEC 61000-4-6 is the normative reference standard to test electronic products immunity to RF conducted injected interference. RF conducted interference is phenomena as simple as placing a wireless device on or near power cables or data lines that can couple wireless through the shielding of those lines and affect associated equipment. More complex situations include cable bundles in a car chassis that may cause the RF conducted affect and impact other lines, and travel to the electronics. RF conducted immunity test equipment will generate more than anticipated RF fields we would expect in the real world. Engineers exercise their equipment across the frequency band, typically 150 kHz to 80 or 230 MHz, to gauge how their product responds to the interference.
EMC testing equipment to certify and comply to EN/IEC 61000-4-7: Harmonics and Flicker Immunity Test. The EMC shop is the only online store for electromagnetic compliance test equipment.
The EMC Shop specializes in radiated and conducted immunity testing and compliance, stocking calibrated test equipment and shipping immediately. Rent, buy or lease EN/IEC 61000-4-8 Magnetic H-Field Immunity Test Equipment.
EMC testing equipment to certify and comply to EN/IEC 61000-4-9 pulsed magnetic field test. The EMC shop is the only online store for electromagnetic compliance test equipment.
IEC 61000-4-10 describe an oscillating magnetic field generator. The oscillating magnetic field is used to test the immunity of electronic equipment to be installed in high voltage sub-stations.
Waveforms can be programmed to meet the requirmenets of IEC 61000-4-11 using a standard AC power source. However, specific voltage dip generators can be used to save time and money, with the preprogrammed dips, interruptions and variations available for easy plug and play. The EMC Shop stocks calibrated test equipment for voltage dips and interruptions as well as other conducted immunity testing. Rent, buy or lease AC voltage dip and interruptions generators per EN/IEC 61000-4-11 today.
Get Application Support, Pricing, Lead Time and More: Contact Form
EMC/EMI Testing Services Radiated Immunity & Susceptibility Antenna Testing Emissions Testing
The ring wave is an oscillatory transient induced in low-voltage cables due to switching of electrical networks and reactive loads, faults, and insulation breakdown of power supply circuits or lighting. The EMC Shop stocks the ring wave generators that produce the waveform per EN/IEC 61000-4-12 immunity test, available for rental or purchase.
EMC/EMI Testing Services IEC 61000-4-19 Antenna Testing
The EMC Shop supports customers testing to IEC 61000-4-16 in efficient ways, with testing services, rental equipment or sale of the solution with on site support. Order online or contact us for stock status or application support.
IEC 61000-4-16 relates to the immunity requirements and test methods for electrical and electronic equipment to conducted, common mode disturbances in the range d.c. to 150 kHz. The object of this standard is to establish a common and reproducible basis for testing electrical and electronic equipment with the application of common mode disturbances to power supply, control, signal and communication ports. It has the status of a basic EMC publication in accordance with IEC Guide 107.
Get Application Support, Pricing, Lead Time and More: Contact Form
EMC testing equipment to certify and comply to EN/IEC 61000-4-18: Damped Oscillatory Wave Immunity Test. The EMC shop is the only online store for electromagnetic compliance test equipment.
Rent, buy or lease IEC/EN 61000-4-19 test equipment for Immunity to Conducted, Differential Mode Disturbances and Signalling in the Frequency Range 2 kHz to 150 kHz on AC Power Ports. The EMC Shop specializes in equipment for RF conducted immunity testing.
IEC 61000-4-20 relates to emission and immunity test methods for electrical and electronic equipment using various types of transverse electromagnetic (TEM) waveguides. These types include open structures (for example, striplines and electromagnetic pulse simulators) and closed structures (for example, TEM cells).
Rent, buy or lease EN/IEC 61000-4-21 Radiated Immunity Test Equipment. The EMC Shop specializes in automotive, commercial and medical electromagnetic compatibility testing.
EMC testing equipment to certify and comply to EN/IEC 61000-4-29: DC Drops, Dips & Interruptions Immunity Testing. The EMC shop is the only online store for electromagnetic compliance test equipment.
The EMC Shop stocks calibrated systems for compliance testing. EN/IEC 61000-4-31 is a new test standard required for AC mains ports and immunity to RF conducted disturbance. Rent, buy or lease EN/IEC 61000-4-31 Conducted Immunity Test Equipment.
Test Generators:
Coupling and Decoupling Devices
Rent the TEM Horn, Radiating Loop Antenna, Field Sensor Loops and Generators to perform IEC 61000-4-39 Radiated fields in close proximity - immunity test.
The DPI test method is popular sice the DPI testing is very simple and straightforward to perform, and DPI testing can be easily simulated by chip designers using their standard design tools.
Turnkey IEC 62132 Solution for DPI, BCI and other Test Methods.
The EMC Shop will provide complete turn-key solutions for compliance testing in accordance with EN/IEC 62132-X standards about 150 kHz to 1 GHz frequency range.
Get Application Support, Pricing, Lead Time and More: Contact Form
Semiconductor test standard for voltage sag immunity. Rent, buy or lease SEMI F47 Voltage Sag Immunity Test Equipment at The EMC Shop.
