> Manufacturers>Teseq (Schaffner)

Teseq (Schaffner)

Quick Links

Information

Teseq (Schaffner)

 

Rental Information          Automotive EMC Test Equipment          BCI Test Equipment            LISN's

 

Teseq offers one of the most comprehensive range of EMC systems for immunity and emissions testing. Their unique “modular” approach to EMC allows engineers to buy only what they need with the ability to easily upgrade as their needs change and expand. Recently acquired by Ametek, completing the Compliance Test Systems division alongside EM Test, Milmega and IFI amplifiers.

 

Get Application Support, Pricing, Lead Time and More: Contact Form

 

How to order

The EMC Shop stocks a large assortment of Teseq equipment for rental.

 

Contact us for lead time to purchase.

 

Teseq FAQ's:

Do we service Teseq Equipment?

Yes, we calibrate most all Teseq equipment to ISO 17025 if required. We have indepth experiencing repairing Teseq and Schaffner generation equipment.

 

Where is Teseq Located?

Teseq manufacturer and services their equipment in Reinash, Switzerland. Edison New Jersey has some capabilities for repair and calibration.

 

Is The EMC Shop a Teseq Distributor?

No, we said you're cute and all, but we want to see other people.


Teseq Videos



Teseq (Schaffner) There are 23 products.

Subcategories

  • Teseq Automotive Transient Generators

    The EMC Shop stocks Teseq automotive transient generators for conducted immunity testing per ISO 7637-2 and ISO 16750-2 and many more. Contact us now for rental and purchase pricing, as well as application support.

     

    Automotive electrical disturbances occur regularly in the vehicle primarily due to switching on and off of various vehicle components from the starter motor to electrical and electronic systems.

     

    There are both emissions and immunity tests required by the standards, of which there are many. The main standards like ISO 7637-2 and ISO 16750-2 define both how these pulses must be simulated and how they are measured and with what limits. The vehicle manufacturers who are ultimately responsible often take these requirements and expand or modify them.

    Teseq Automotive EMC Test Equipment

    Teseq Automotive Transient Generators and EMC Test EquipmentFor immunity testing you need a transient generator (NSG 5500), some kind of coupling network, a battery simulator (PA 5840 or PA 5740) and a function generator (now integrated with NSG 5500).

    For emissions testing the AES 5501 includes just about everything you need, switches, artificial network, even the oscilloscope probe.

    Many OEM requirements include ESD testing similar to ISO 10605, for which an NSG 438 is highly recommended.

    Teseq Automotive EMC Test Standards

  • Teseq RF Test Equipment

    Teseq offers an assortment of unique RF test equipment suitable for radiated susceptbility compliance testing including RF amplifier, GTEM cells, reference sources, RF switches, reverberation chambers and more.

  • Teseq EFT/Burst Generators

    Teseq offers high end combined or single function solutions for simulating Electric Fast Transients (EFT) for immunity testing in conformity with international, national and manufacturers’ standards including the latest IEC/EN 61000-4-4 standard. The EMC Shop stocks Teseq EFT/Burst generators, as well as EFT coupling clamps, calibration accessories, and test tables/environments. Rent, buy or lease a turnkey test solution today. 

    All models, current and previous generation, reach levels to 4.8 kV and Coupling / Decoupling Networks (CDN’s) are available for single and three phase testing up to 200 A.

    Teseq EFT/Burst Generators

    NSG 3040A-EFT
    NSG 3040-EFT (Discontinued)
    NSG 3025 (Discontinued)
    NSG 2025 (Discontinued)



    The Teseq NSG 3060 and NSG 3060A typically include EFT/Burst, however not a practical stand-alone solution.

    Video Overview: EFT Test Setup

  • Teseq RF Immunity Generators

    Teseq RF immunity generators are integrated multipurpose systems for Radiated Immunity and conducted RF immunity testing using clamp and coupling injection methods or swapping and using antennas for RF field generation.

  • Teseq ESD Guns

     

    Electrostatic discharge immunity (ESD) tests are used to verify complete systems and duplicate disturbances in installations. These tests contribute to identify immunity failures caused by bad cabling or system composition, as well as grounding problems. Teseq ESD guns fulfill the requirements of most major ESD standards. Thanks to stabilized HV output all Teseq ESD guns exceed this need by far and guarantee optimized reproducibility of tests. The basic models are type-approved and calibrated to IEC/EN 61000-4-2. A comprehensive range of additional network modules are available for testing to various standards including ISO 10605. 

    Teseq ESD Guns Models

    Teseq NSG 435
    Teseq NSG 437
    Teseq NSG 438
    Teseq NSG 438A (Same as EM Test ESD NX30)

    The EMC Shop typically has every Teseq model and most popular accessories in stock, calibrated and ready to ship for sales orders on new units as well as rental or used equipment.

    Videos Related to Teseq ESD Guns

     

     

     

  • Teseq Surge Generators

    The EMC Shop typically has every Teseq surge generator model and most popular accessories in stock; rent buy or lease a surge generator and ship today. Available models can reach levels up to 6.6 kV for Combination Wave and 7.7 kV for Telecom Surge. Coupling / Decoupling Networks (CDN’s) are available for single and three phase testing up to 100 Amps. Data line couplers are available for up to 4 pairs of unshielded, symmetrical telecom lines.

    Overview Teseq Surge Generators

    Teseq offers high end combined or single function solutions for simulating Surge pulses for immunity testing in conformity with international, national and manufacturers’ standards including IEC/EN 61000-4-5, ANSI C62.41 & 45, ANSI TIA 968-B. and ITU-T.K series. Pulses include the classic Combination Wave Surge (1,2/50 & 8/20) and Telecom Surge (10/700 & 5/320).

    Surge Test Environment

    Electrostatic Immunity Test Environment - Teseq ESD Guns



    More Info

    Videos Related to Teseq Surge Generators



  • Teseq Harmonics & Flicker Solutions

    The Teseq Harmonics and Flicker measurement test systems comply to the latest IEC/EN standards, including IEC 61000-3-2 and IEC 61000-3-3. The programmable power generation capability of up to 45 kVA (90 kVA and 145 kVA sources comprise multiple 45 kVA units) provides more than ample power to cater for a wide range of Equipment Under Test (EUT).

  • Teseq Dips, Interrupts & Variations Equipment

    Teseq offers high end single and multifunctional solutions for simulating Dips, Interrupts and Variations according to IEC/EN 61000-4-11 and IEC/EN 61000-4-29 standards.

    The Teseq NSG generators can be used for single phase Dips Interrupts & Variations testing up to 270 V/16 A.

    Three phase testing can be achieved with Teseq ProfLine systems.

  • Teseq Ring Wave Generators

    Teseq offers high end combined or single function solutions for simulating Ring Wave pulses for immunity testing in conformity with international, national and manufacturers’ standards including IEC/EN 61000-4-12 and ANSI C62.41 & 45.

    Available models can reach levels up to 6.6 kV.

  • Teseq Oscillatory Waves Generators

    Teseq offers high end combined or single function solutions for simulating Slow Oscillatory Waves for immunity testing in conformity with international, national and manufacturers’ standards including IEC/EN 61000-4-18 and ANSI C37.90.1.

  • Teseq Absorbing Clamps / Ferrite Tube

    Teseq Absorbing Clamps are used for measuring interference signals on power supply cables. Decoupling clamps and ferrite tube are available for a variety of different EMC applications.

  • Teseq EMC Antennas

    Teseq has an extensive offering of EMC antennas. The well-known BiLog antenna, the first ultrawide band EMC emissions measurement antenna, represents an important milestone in the development of EMC measuring instruments.

  • Teseq Current Probes

    Teseq offers a unique set of current probes for bulk current injection and monitoring testing per IEC 61000-4-6, ISO 11452-4, MIL-STD 461 and more.

  • Teseq Coupling Networks

    The EMC Shop stocks a wide assortment of coupling networks from Teseq for surge, EFT/BURST and conducted RF immunity testing.

per page
Showing 13 - 23 of 23 items
  • Quick view
    • Rigid construction
    • Inside complete flat surface (no connection elements as used for pan-type or sandwich
    • construction) for optimum power and field performance
    • Outside reinforced frame for optimum stability
    • Plug’n’Play chamber – fully tested and ready to use – no on-site assembling necessary
    • In addition wheels for easy transportation (optional as table top design) – mobile design
    • Stirrer control unit with remote interface and software
    • Driver for test house software Compliance 5I/E
    • Open source commands for easy implementation of the stirrer controller in any other software
    • Applications in the automotive, military and commercial market
    • Supplied with four feed-throughs type N, media panel, Stirrer Control Program and stirrer with motor control and filtering
    • Optional power and signal filter available

    Standards

    • IEC/EN 61000-4-21
    • MIL STD 461
    • RTCA/DO 160
    • ISO 11452-11
    • SAE J1113-27
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • CISPR 22 (EN 55022) and CISPR 16-1-2 compliant
    • Battery or DC power supply
    • Switchable conversion factor
    • Shielded to reduce the direct capacitive coupling from local cables
    • Calibration fixture included
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Integrated signal generator 80 MHz to 6 GHz
    • Integrated RF switch network
    • Integrated 3 freely configurable pulse modulators (1 μs to 200 s) for radar pulse profiles
    • Multiple EUT monitoring options
    • 3.5“ TFT color display
    • Safety interlock function
    • Remote control via USB, RS232 or LAN
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Coupling/Decoupling Network (CDN) CDN M Type
    • Designed for IEC/EN 61000-4-6 Conducted RF Immunity Testing
    • CDN M016 switchable M2 or M3
    • Types with 4 mm banana sockets
    • Performance up to 230 MHz
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Rigid construction
    • Inside complete flat surface (no connection elements as used for pan-type or sandwich
    • construction) for optimum power and field performance
    • Outside reinforced frame for optimum stability
    • Plug-and-play chamber – fully tested and ready to use – no on-site assembling necessary
    • In addition wheels for easy transportation – mobile design
    • Stirrer control unit with remote interface and software
    • Driver for test house software Compliance 5I/E
    • Open source commands for easy implementation of the stirrer controller in any other software
    • Applications in the automotive, military and commercial market
    • Supplied with two feed-throughs type N, media panel, Stirrer Control Program and stirrer with motor control and filtering
    • Optional power and signal filter available

    Standards

    • IEC/EN 61000-4-21
    • MIL STD 461
    • RTCA/DO 160
    • ISO 11452-11
    • SAE J1113-27
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • IEC/EN 61000-4-6
    • 110W, 10kHz - 400MHz amplifier
    • 4kHz - 1 GHz signal generator
    • Multiple monitoring options
    • 5.7" TFT color display
    • Remote control software & report generator
    • Optically decoupled remote control
    • Whisper remote
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Fully IEC 61000-4-5 compliant
    • 1.2/50 µs pulse up to 15 kV / 7.5 kA
    • 1000 VDC EUT supply available
    • Large 7.2" color display and touch panel interface
    • Standards and user test libraries
    • Wide range of accessories
    Request Quote
    Inquire for Lead Time
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Designed for IEC / EN 61000-4-31 
    • Integrated white noise generator 150 kHz to 80 MHz
    • 3 power meter inputs 9 kHz to 1 GHz
      Integrated class A power amplifier with >80 W, 150 kHz to 80 MHz
    • 5,7“ TFT color display
    • Internal, menu-based control software
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Integrated signal generator 9 kHz to 1 GHz
    • 3 power meter inputs 9 kHz to 1 GHz
    • Integrated power amplifier module for different applications
    • Multiple EUT monitoring options
    • Optional built-in amplifier up to 75 watts (150 kHz - 230 MHz)
    • Meet IEC 61000-4-6,  IEC 61000-4-3, IEC 61000-4-20, IEC 61000-4-21 
    • Meet Mil-STD 461 CS114
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 30 kV air and contact discharge
    • 150 pF/330 Ω discharge network
    • ISO 10605 discharge networks: 
      150 pF/2000 Ω, 330 pF/2000 Ω, 330 pF/330 Ω
    • Additional discharge networks can be added
    • Mains operation
    • Color touch panel control
    • Activity log
    • Threshold function
    • High impedance switched bleed-off function
    • Automatic self-calibration
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Rentals includes all accessories for Air- and contact-discharge to 30 kV
    • Discharge Networks for Unique Resistance & Capacitance Requirements
    • NIST Calibration documentation with data provided
    • Same Day Shipping on Orders Placed by 3 PM
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
Showing 13 - 23 of 23 items