CISPR Standards

Quick Links

Information

Viewed products

Rent Teseq CDN M016...
Coupling/Decoupling Network (CDN) CDN...

Teseq CDN M016 16 Amp, 230 MHz, L,N, PE or L,N (Banana sockets) - EMC Test Equipment

View larger

Display all pictures

Rent Teseq CDN M016 Switchable 16 Amp Coupling/Decoupling Network

Condition New

Coupling/Decoupling Network (CDN) CDN M Type
Designed for IEC/EN 61000-4-6 Conducted RF Immunity Testing
CDN M016 switchable M2 or M3
Types with 4 mm banana sockets
Performance up to 230 MHz

The EMC Shop

More details

In Stock

Request Quote

Request Quote/More Info

Send to a friend
Send to a friend
Rent Teseq CDN M016 Switchable 16 Amp Coupling/Decoupling Network
Coupling/Decoupling Network (CDN) CDN M Type
Designed for IEC/EN 61000-4-6 Conducted RF Immunity Testing
CDN M016 switchable M2 or M3
Types with 4 mm banana sockets
Performance up to 230 MHz
Recipient :
Name of your friend ^* :
E-mail address of your friend ^* :
^* Required fields
or Cancel
Print

Specifications

Voltage Rating	AC max. voltage (line to ground): 250 V DC max. voltage (line to ground): 400 V; 3 kV DC, 2 sec
Frequency Range	150 kHz to 230 MHz
RF Connector	BNC 50 Ω
Standards Met	IEC/EN 61000-4-6
Mains & EUT Connections	4 mm banana
Common Mode Impedance	150 kHz to 26 MHz: 150 Ω ±20 Ω 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω
Current Rating	16 Amps
Application/Test Type	switchable 2 or 3 power lines, (L+N or L+N+PE)
Insertion Loss	Less than 0.1 dB
RF Input Voltage	30 Volts (Max)
Decoupling of Common Mode Disturbance	150 kHz: Greater than 30 dB1.5 MHz: Greater than 60 dB30 MHz: Greater than 40 dB230 MHz: Greater than 20 dB
Voltage Division Factor	150 kHz to 80 MHz: 9.5 dB ±1 dB80 MHz to 230 MHz: 9.5 dB +3 dB / -2 dB
Dimensions	3.9" x 3.9" x 9.5" (100 mm x 100 mm x 240 mm)
Weight	3.3 Lbs (1.5 kg)

Test Equipment Description

How to Rent the Teseq CDN M016:

Click "Add to Cart" above
Register or Check Out as a Guest
Select Shipping Method (use "My Account" and input your account # and method)
Order Confirmation and Tracking Info Follows

About the Teseq CDN M016:

IEC/EN 61000-4-6 specifies the design and performance of a range of coupling/decoupling networks (CDNs). Each CDN is specific to the type of cable and the intended signal carried on the cable. Teseq offers an extensive range of CDNs which fully comply with the requirements of the standard and provide a simple and reliable method of injecting RF energy into the equipment under test (EUT).

Whilst the published standard only specifies the performance of CDN from 150 kHz to 80 MHz, most of Teseq CDNs are specially designed to give the same performance to a wider frequency range. This is required by some product specific standards. Each CDN is also useable for emission testing. Special types meet the requirements of CISPR 15 or can be used as impedance stabilization network (ISN) defined in CISPR 22.