> Application/Test Type>Conducted Emissions
Conducted Emissions

 

Evaluate your DUTs line outputs (power and data) for compliance per FCC, UL, MIL-461, DO-160 and any other test standards. A conducted emissions test setup is done with a few pieces of equipment and can be accomplished quickly by novice engineers. Having an appropriate and properly grounded test setup ensures consistent and reliable measurements when evaluating your products conducted emissions. The EMC Shop is an ISO 17025 accredited company, stocking all the equipment to test conducted emissions.

 

Application Overview - Conducted Emissions Testing

 

Get Application Support, Pricing, Lead Time and More: CONTACT FORM

EMC Conducted Emissions Test Setup

EMC Conducted Emissions Setup

Conducted Emissions There are 64 products.

Subcategories

  • Analyzers, Receivers and Scopes

    Most any signal or spectral analysis unit can be used to evaluate the quality of your electrical components and DUT's. Quasi peak detection and EMI filters are offered as options by many manufacturers. EMI Receviers and EMC analyzers have the required hardware and software to help identiry problem areas in both conducted and radiated applications, saving time on pre-certifciation and saving money but better identifing issues that may cause failure at the certification lab.

  • Impedance Stabilization Networks (Power and Data Lines)

    Impedance Stabilization Networks  also known as Artificial Mains Networks are the most common transducer to perform conducted emission testing. For testing electrical power lines a Line Impedance Stabilization Network (LISN) is required. To test data lines an Impedance StabilizatioN Network (ISN) is used.

  • Transient Limiters

    Used between the LISN and measuring device such as an EMI receiver or a spectrum analyzer to protect the unit from high voltage spikes. Most transient limiters are spec'd to meet commerical and military conducted emissions standards (9 kHz to 30 MHz)

  • Preamplifiers

    Used inbetween close field probes and the measuring device (Spectrum analyzer or EMI receiver) to maximize performance of the probes and help identify problem areas while taking real time measurements.

  • Probes and Clamps

    Close field probes, current probes, voltabe probes and abosrbing clamps are scondary components required in some commercial and military & aerospace conducted emissions standards. The EMC Shop is an ISO 17025 accredited company with inventory of many electromagnetic probes and clamps for conducted emissions testing.

  • Accessories

    Conducted Emissions Accessories

  • Turnkey Bundles

    Rent, buy or lease turnkey test equipment bundles for conducted emissions testing to FCC, MIL-STD and more. The EMC Shop specializes in emissions test, pre-certification and compliance.

per page
Showing 25 - 36 of 64 items
  • Quick view
    $14,012.50 $14,750.00 -5% Used
    • ISO 17025 Calibration from Keysight
    • 25 MHz Bandwidth
    • -170 dBm DANL at 1 GHz
    • Max Dynamic Range 3rd order @ 1 GHz: 112 dB
    • Standard Attenuator Range; 60 dB (10 dB Steps)
    • Measure the smallest signals in the presence of large ones with best-in-class level accuracy, DANL & TOI
    • Perform power measurements quickly at discrete frequency points with list-sweep mode
    • Simplify testing with X-Series measurement apps: phase noise, noise figure, analog demodulation, wireless communications & more
    $14,012.50 $14,750.00 -5%
    Add to cart
    Reduced price!
    1 Unit
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 10 kHz to 400 MHz Frequency Range
    • Price is for a pair of LI-3100 line impedance stabilization networks
    • Frequency range of 10 kHz to 400 MHz
    • Fully compliant with DO-160/ MIL-STD 461F/CISPR 25/ CISPR 16-1-2
    • 100 Amp AC (forced air cooling)
    • “Air-core” inductors to prevent saturation
    • Individual Calibration Included
    • Three-Year Warranty
    Request Quote
    Typically in Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 100 kHz to 108 MHz Frequency Range
    • Fully compliant with CISPR 25 / CISPR 16-1-2
    • "Air-core" inductors to prevent saturation
    • Individual Calibration Included
    • Three-Year Warranty
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    $409.00 Monthly
    • Frequency Range: 1 MHz - 1 GHz
    • Max Current: 200 Amps DC to 60 Hz, 20 Amps CW (50 Amps Pulse)
    • Transfer Impedance: 24 dBΩ
    • Aperture: 1.2" (32 mm)
    $409.00
    Add to cart
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Protects the spectrum analyzer input from damage caused by high-level transients
    • Frequency Range: 9 kHz to 200 MHz
    • Insertion Loss: 10 dB
    • Maximum Input Level: Continuous: 2.5 W (+34 dBm), Pulse: 10 kW for 10 µS, DC:±12 V
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Pair of LI-325 line impedance stabilization networks
    • Fully compliant to RTCA DO-160 / MIL-STD 461D
    • "Air-core" inductors to prevent saturation
    • Provides a near 1:1 (<0.5 dB insertion loss) 50Ω coaxial measurement port (type-N)
    • Provides a defined, stable, impedance to the Equipment Under Test (EUT)
    • Individual Calibration Included
    • Three Year Warranty
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 150 kHz to 30 MHz Frequency Range
    • Price is for a pair of LI-125C line impedance stabilization networks
    • Fully compliant to CISPR 16-1-2 / ANSI C63.4
    • "Air-core" inductors to prevent saturation
    • Provides a near 1:1 (<0.5 dB insertion loss) 50Ω coaxial measurement port (type-N)
    • Provides a defined, stable, impedance to the Equipment Under Test (EUT)
    • Individual Calibration Included
    • Three Year Warranty on New Units
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Rent the Keysight (Agilent) N9038A-526-B85-RT1
    • 3 dB resolution bandwidths
    • Quasi-peak, EMI-avg, RMS-avg and diagnostic detectors
    • Meets CISPR 16-1-1: 2010 and MIL-STD-461F EMI receiver requirements
    • ±0.5 dB absolute amplitude accuracy
    • -166 dBm displayed average noise level (DANL) with preamplifier and noise floor extension
    • EMC measurements offering simultaneous detectors, signal lists, scan tables, limit lines, and correction factors
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • For use with one, two, three, or four unscreened balanced pairs
    • Refers schematic circuit example in CISPR 22/32 Figure D.3/G.3
    • Intended for connection to cable category 3 and 5
    • 1000BaseT and PoE application
    • Changeable pin-arrangements with RJ11 and RJ45
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    $1,995.00 New
    • 9kHz-30MHz 
    • V LISN
    • CISPR 16-1-2 ANSI C63.4 FCC, ETS, VCCI and VDE, MIL461E/F
    • N type /BNC Connector option
    $1,995.00
    Add to cart
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 9 kHz a 30 MHz frequency range
    • 100 A max output current
    • Large baseplate for optimal grounding
    • Local and remote control for PMM EMI receivers
    • Meets the requirements of several standards including CISPR 16-1-2, VDE 0876, FCC part 15
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Price is for a pair of LI-125A line impedance stabilization networks
    • Fully compliant to CISPR 16-1-2 / ANSI C63.4
    • "Air-core" inductors to prevent saturation
    • Provides a near 1:1 (<0.5 dB insertion loss) 50Ω coaxial measurement port (type-N)
    • Provides a defined, stable, impedance to the Equipment Under Test (EUT)
    • Individual Calibration Included
    • Three Year Warranty on New Units
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
Showing 25 - 36 of 64 items