Intrx LIN16-2 Single Phase Two Wire LISN for CISPR 16-1-2

The Intrx LIN16-2 LISN is used to predict conducted emission for diagnostic, pre-compliance and compliance testing. Scientific Designs (INTRX) manufactures models in compliance with CISPR 16-1-2, EN, ANSI C63.4, FCC, ETS, VCCI and VDE, MIL461E/F standards and automotive for measurements in commonly used Standards.

Intrx LIN16-2 Single Phase Two Wire LISN for CISPR 16-1-2:

The Intrx line impedance stabilization network (LISN) is a low-pass filter typically placed between an AC or DC power source and the EUT (Equipment Under Test) to create a known impedance as per complying standard for the measurement of conducted emission. It also isolates the unwanted RF signals from the power source with pre-filter included. It provides a Radio frequency (RF) noise measurement port.

These LISNs are Single Phase, 2 Wire networks. Appropriate line can be selected by a rotary switch. The other line will be terminated internally with 50Ω.

Artificial Hand simulation 510Ω + 220pF impedance in accordance with CISPR 16-1-2 is provided. Standard Input and Output terminals provided are CEE Sockets, however optional wing terminal and SUPERCON connectors can be ordered.

A transient limiter is highly recommended to used with LISN at the front end of EMI Rx or Spectrum Analyzer to protect measuring instrument from transients.

Standards Met:

• CISPR 16-1-2, EN
• ANSI C63.4
• FCC
• ETS
• VCCI
• VDE, MIL461E/F