> EMC Test Equipment>Transient Generators>Medical/Commercial Transient Generators>Surge, Burst/EFT, Ring Wave, Dips & Interrupts>EM Test UCS 500N5 Multifunctional Generator for EFT/Burst, Surge & Power Fail up to 5.5kV

Surge, Burst/EFT, Ring Wave, Dips & Interrupts

Quick Links

Information

Viewed products

EM Test UCS 500N5 Multifunctional Generator for EFT/Burst, Surge & Power Fail up to 5.5kV View larger

EM Test UCS 500N5 Multifunctional Generator for EFT/Burst, Surge & Power Fail up to 5.5kV

New

  • IEC/EN 61000-4-5 & ANSI C62.45: SurgeModule up to 5kV
  • IEC/EN 61000-4-4: Burst Module up to 5.5kV
  • IEC/EN 61000-4-11: Dips Interrupts and Variations
  • Built in Single phase 300 Volt/16 Amp coupler
  • Manual operation from front panel
  • USB and GPIB-Bus for remote control
  • Monitor outputs for peak voltage and peak current
  • Fail inputs
  • External variac control 0-10Vdc

More details

6 - 8 Weeks

Request Quote

Request Quote/More Info

Specifications

Standards MetFCC 97-270 (part 68); IEC 60255-22-5; IEC 61000-4-11; IEC 61000-4-29; IEC 61000-4-4; IEC 61000-4-5; IEC 61000-4-8; IEC 61000-4-9; IEC 61326; IEC 61850-3
Application/Test TypeCE Marking - Cover transient and power fail requirements according to international standards for immunity tests
Pulse voltage (open circuit)160V - 5,000V ± 10%
Impedance2 Ohm
Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse)
Pulse conforms to IEC/EN 61000-4-5
ParameterValue
Pulse current (short circuit)Max. 2,500A ± 10%
CouplingLine to line;Line(s) to ground
Repetition time10ms - 9,999ms
Pulse repetitionmax. 1Hz (1s - 999s)
Phase synchronization0° - 360°, resolution 1° (16 - 500Hz)
Polaritypositive / negative / alternating
CouplingL, N, PE; all combinations
Phase synchronization0° - 360°, resolution 1°
Dips, Interrupts & Variations
Conforms to IEC/EN 61000-4-11, IEC/EN 61000-4-29
ParameterValue
Dips, Interrupts & VariationsAs per IEC/EN 61000-4-11,IEC/EN 61000-4-29 andIEC/EN 61000-6-1, -6-2
Test duration1 - 30,000 or endless, selectable
Uvar with step transformer300V AC + DC
Test duration0:01min - 99:59min
Peak inrush current capability500 Amps
Burst (EFT) 5/50 ns
Pulse conforms to IEC/EN 61000-4-4
ParameterValue
Pulse amplitude200V - 5,500V ± 10%;100V - 2,750V ± 10% into 50ohm
Burst frequency0.1 kHz - 1,000 kHz
Polaritypositive / negative
Uvar with optional variacN/A
Switching timesUnder 5us into a 100ohm resistive load
Event time20us - 9,999s
Repetition time10ms - 9,999s
Phase synchronization0° - 360°, resolution 1° (16 - 500Hz)
Burst time0.10ms - 999ms
Dimensions19", 3HU
Weight25 kg's (55 Lbs)

Test Equipment Description

The UCS 500N5 includes everything necessary to conduct fully compliant tests. The power mains supply for the controls and for the DUT is separate to render it more flexible to use with different DUT supply voltages.

The UCS 500N5 can be operated manually from the front panel or by remote via the built-in USB or GPIB interface. Fail inputs allow to control an ongoing test sequence based on the status of the DUT. Monitoring outputs (BNC) are offered for easy signal measurement and verification. Safety features such as interlock and warning lamp control are available.

Pre-programmed Standard Test routines allow highest user convenience. Still the UCS 500N5 offers the Quick Start test routine where parameters can be changed on-line during the test to evaluate the susceptibility level of an individual DUT.

The EM Test UCS 500N5 ultra-compact simulator is the most versatile tester to cover transient and power fail requirements according to international standards (basic and generic standards) and product/product family standards. The UCS 500N5 is the most economic solution for tests during development as well as for full-compliant immunity tests and CE Marking for single phase DUT with the ability to be extended for testing three-phase DUTs by means of an automatically controlled external coupling network up to 200A.

EM TEST supplies a large range of accessories for the various applications such as magnetic field tests.

EM Test UCS500N5 Features:

  • IEC/EN 61000-4-5 & ANSI C62.45: SurgeModule up to 5kV
  • IEC/EN 61000-4-4: Burst Module up to 5.5kV
  • IEC/EN 61000-4-11: Dips Interrupts and Variations
  • Built in Single phase 300 Volt/16 Amp coupler
  • Manual operation from front panel
  • USB and GPIB-Bus for remote control
  • Monitor outputs for peak voltage and peak current
  • Fail inputs
  • External variac control 0-10Vdc
  • Control of external three-phase couplers

EM Test UCS500N5 Ordering Options:

  • UCS 500N5: Ultra compact simulator with EFT/5 up to 5.5kV, VCS/5 up to 5kV and PFS/5; 1ph CDN 300V AC/DC (p-n) / 16A
  • UCS 500N5.1: Ultra compact simulator with EFT/5 up to 5.5kV, VCS/5 up to 5kV and PFS/5; 1ph CDN 300V AC/DC (p-n) / 32A
  • UCS 500N5.2: Ultra compact simulator with EFT/N5, VCS/N5 and PFS/N5; 1ph CDN 400V AC/DC (p-n) / 16A

Associated EMC Test Equipment

23 other products in the same category: