8 kV EFT / Burst Generators

Quick Links

Information

Viewed products

Thermo Fisher Keytek ECAT High Voltage Burst/EFT Generator up to 8 kV View larger

Thermo Fisher Keytek ECAT High Voltage Burst/EFT Generator up to 8 kV

Used

  • Industry Best Warranty on Used Test Equipment
  • Try before you bur or rent this Keytek 8kV EFT System
  • System Configuration:
    • E103 Controller (fiber-interface for remote control)
    • E421 EFT/Noise Burst Simulator to 8 kV (IEC 61000-4-4)
    • E4554 Burst Coupling up to 8 kV
    • Input voltage: 100V to 240VAC
    • Input Current: 3.5A at 100 V; 1.5A at 240 V
    • User Manual
    • Fresh Calibration Certificate
    • 10% off Calibration Service for Life

More details

In Stock

Request Quote/More Info

PDF Downloads

Specifications

Standards MetIEC 6100-4-5, ANSI/IEEE C62.41 Cat. B, UL 1449 (8/98) , IEC 61000-4-4
Burst (EFT) 5/50 ns
Pulse conforms to IEC/EN 61000-4-4
ParameterValue
Pulse amplitude200V to 8.0kV, ±10%; 5 V resolution
Burst frequencyAdjustable from 1 kHz to 1 MHz up to 4.4 kV; 1 kHz to 250 kHz from 4.4 kV to 8.0 kV
PolarityPositive, negative, alternating
Burst time1 to 360 sec.; 1 second resolution 1 to 240 min.; 1 minute resolution 1 to 24 hours; 1 hour resolution

Test Equipment Description

About the Keytek ECAT System:

The Thermo Fisher Keytek ECAT Simulator systems are a sesoned favorite being used for electromagnetic Surge and EFT testing for more than 2 decades. The controller has an easy-to-use Windows based application software for quick implementation of test routines and standards, with automoatic report generation. A multi-level system interlock architecture provides maximum safety to keep first time users safe.

This rental ECAT system is suitable for users looking to evaluate DUT in a precompliance environment for passing Surge and Burst (Electrical Fast Transient) immunity test standards such as IEC 61000-4-4, IEC 61000-4-5 and ANSI C62.41. The single phase, 15 amp coupling network is suitable for most commercial electronics and lower powered electronics.

ECAT EFT/Surge Simulator Configuration:

  • E103 Controller (fiber-interface for remote control)
  • E421 EFT/Noise Burst Simulator to 8 kV (IEC 61000-4-4)
  • E4554 Burst Coupling up to 8 kV
  • Input voltage: 100V to 240VAC
  • Input Current: 3.5A at 100 V; 1.5A at 240 V
  • User Manual
  • NIST Calibration Certificate

Associated EMC Test Equipment