> Application/Test Type>Conducted Emissions>Analyzers, Receivers and Scopes
Analyzers, Receivers and Scopes

Most any signal or spectral analysis unit can be used to evaluate the quality of your electrical components and DUT's. Quasi peak detection and EMI filters are offered as options by many manufacturers. EMI Receviers and EMC analyzers have the required hardware and software to help identiry problem areas in both conducted and radiated applications, saving time on pre-certifciation and saving money but better identifing issues that may cause failure at the certification lab.

Analyzers, Receivers and Scopes There are 28 products.

per page
Showing 13 - 24 of 28 items
  • Quick view
    • Available for Rental or Purchase
    • Hardware and Firmware designed around the current EMC standards ready to upgrade to future changes
    • Powerful digital Click Analyzer with full compliance to latest CISPR 14-1 specifications, 1 (internal option) or 4 (external option) channels
    • Frequency ranges: 10Hz to 30MHz; 3GHz; 6GHz; 18GHz
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Rentals ship immediately
    • 85 MHz Bandwidth Analysis Option (Fastest Testing Possible)
    • Real-Time Analysis up to 85 MHz BW
    • Quasi-peak, EMI-avg, RMS-avg and diagnostic detectors
    • Meets CISPR 16-1-1: 2010 and MIL-STD-461F EMI receiver requirements
    • Purchase a Used Keysight N9038 EMI Analyzer here.
    Request Quote
    Call for Availability
    Request Quote/More Info
    Add to Compare
  • Quick view
    $995.00
    • Full systems for EMI measurements available
    • Rentals ship in 1-2 Business Days
    • Frequency Range from 9 kHz - 1.5 GHz
    • Current Calibration Cerificate Included
    $995.00
    Add to cart
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Ideal analyzer for EMI conducted emissions precompliance testing
    • 9 kHz to 40 GHz
    • Built-in quasi peak detector
    • Run multiple detectors simultaneously for fast testing
    • Resolution bandwidth 1 Hz to 10 MHz
    • Used FSP38 spectrum analyzer supplied with Fresh NIST Calibration
    • 10% off Calibration Services for Life
    • 180 Day Warranty
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Built to CISPR 16-1-1 and CISPR 16-1-2 Standards
    • Conducted and Radiated Emissions Tests
    • Frequency range: 150 kHz – 1 GHz, single input (extendable to 9 KHz and 3 GHz)
    • Two built in LISN's
    • Demodulation:  AM-FM, internal loudspeaker
    • CISPR Detectors:  Peak, Quasi-Peak, Average, RMS, C-Average, RMS-Average (option) Time-saving Smart Detector function analyzing critical frequencies only
    Request Quote
    Typically Stocked
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Rentals Ship Same Day
    • Built to CISPR 16-1-1 and CISPR 16-1-2 Standards
    • 140 dBµV (2 W) maximum input level without damage
    • 9 kHz – 3 GHz Frequency range, single input (extendable to 9 KHz and 3 GHz)
    • Built in LISN
    • Direct analog to digital conversion up to 30 MHz
    • CISPR Detectors:  Peak, Quasi-Peak, Average, RMS, C-Average, RMS-Average (option) Time-saving Smart Detector function analyzing critical frequencies only
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • High-resolution touchscreen
    • Fully customizable display
    • Fast access to important tools
    • Signal details at your fingertip
    • Fast access to instrument setups
    • Documentation at the push of a button
    Request Quote
    Call for Availability
    Request Quote/More Info
    Add to Compare
  • Quick view
    $14,012.50 $14,750.00 -5% Used
    • ISO 17025 Calibration from Keysight
    • 25 MHz Bandwidth
    • -170 dBm DANL at 1 GHz
    • Max Dynamic Range 3rd order @ 1 GHz: 112 dB
    • Standard Attenuator Range; 60 dB (10 dB Steps)
    • Measure the smallest signals in the presence of large ones with best-in-class level accuracy, DANL & TOI
    • Perform power measurements quickly at discrete frequency points with list-sweep mode
    • Simplify testing with X-Series measurement apps: phase noise, noise figure, analog demodulation, wireless communications & more
    $14,012.50 $14,750.00 -5%
    Add to cart
    Reduced price!
    1 Unit
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Rent the Keysight (Agilent) N9038A-526-B85-RT1
    • 3 dB resolution bandwidths
    • Quasi-peak, EMI-avg, RMS-avg and diagnostic detectors
    • Meets CISPR 16-1-1: 2010 and MIL-STD-461F EMI receiver requirements
    • ±0.5 dB absolute amplitude accuracy
    • -166 dBm displayed average noise level (DANL) with preamplifier and noise floor extension
    • EMC measurements offering simultaneous detectors, signal lists, scan tables, limit lines, and correction factors
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • E7400A Series EMC Analyzer
    • Close Field Probe Set
    • Biconical Antenna
    • Log Periodic Antenna
    • Line Impedance Stabilization Network (LISN)
    • Amplifier
    • Transient Limiter with High-Pass Filter
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Rigol DSA710 100kHz to 1GHz Spectrum Analyzer
      • 100kHz to 1GHz Frequency Range
      • Displayed average noise level (DANL) <-155dBm/Hz typ. with preamplifier on
      • Minimum resolution bandwidth (RBW) 100Hz
      • Phase noise <-80dBc/Hz @10kHz offset
      • Level measurement uncertainty <1.5dB
      • 8" (800 x 480) high-definition display
      • Linear and logarithmic frequency axis
    • EMI-DSA800
      • For DSA800 Series Models
      • EMI Filter & Quasi-Peak Detector Kit
      • Option can be added by a software key
    • NFP-3
      • 30MHz to 3GHz Frequency Range
      • One set includes four types of probe, provides optimizing sensitivity and resolution
      • Minimum resolution: 2mm; able to capture near field radiation of single circuit line
      • Applicable for electromagnetic leakage testing inside the cable
    • S1210 EMIs
      • Introduces the workspace concept - Manage multiple measurements easily
      • 'Demo' mode included - Trial the software without an instrument and a licence
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • FPC1000 Low-Cost Spectrum Analyzer for Emissions Testing
      • Frequency range: 5 kHz to 1 GHz, Upgradable to 2 GHz or 3 GHz
      • Resolution bandwidth settings down to 1 Hz
      • 10.1" WXGA (1366 x 768 pixel) display
      • Wi-Fi-enabled w/ remote control (included)
      • Easy virtual control w/ iOS/Android/PC
      • Low noise floor / High max. input power
      • Receiver mode for EMI debugging on circuit boards, integrated circuits, cable shielding, etc.
    • HM6050-2 Line Impedance Simulation Network
      • Frequency range from 9 kHz to 30 MHz
      • Built-in transient limiter
      • Artificial hand connector
    • HZ540 Near Field Probes
      • Frequency range from 100 kHz to 1/3 GHz
      • Probes included (1 × Electrical Field Probe, 1 × Magnetic Field Probe, 1 × High Impedance Probe)
    • EMC PreCom
      • EMC Precompliance Software (EMC PreCom) -- EMI module part of the HMExplorer software for conducting precompliance measurements (only with HO720 USB/RS-232 or the optional HO732 Ethernet/USB interface)
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
Showing 13 - 24 of 28 items