> Application/Test Type>Conducted Emissions>Impedance Stabilization Networks (Power and Data Lines)
Impedance Stabilization Networks (Power and Data Lines)

Impedance Stabilization Networks  also known as Artificial Mains Networks are the most common transducer to perform conducted emission testing. For testing electrical power lines a Line Impedance Stabilization Network (LISN) is required. To test data lines an Impedance StabilizatioN Network (ISN) is used.

Impedance Stabilization Networks (Power and Data Lines) There are 65 products.

per page
Showing 37 - 48 of 65 items
  • Quick view
    • Price is for a pair of LI-550A LISN's
    • Fully compliant to CISPR 16-1-2 / CISPR 25
    • "Air-core" inductors to prevent saturation
    • Provides a near 1:1 (<0.5 dB insertion loss) 50Ω coaxial measurement port (type-N)
    • Provides a defined, stable, impedance to the Equipment Under Test (EUT)
    • Individual Calibration Included
    • Three Year Warranty
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • For use with one, two, three, or four unscreened balanced pairs
    • Refers schematic circuit example in CISPR 22/32 Figure D.3/G.3
    • Intended for connection to cable category 3 and 5
    • 1000BaseT and PoE application
    • Changeable pin-arrangements with RJ11 and RJ45

    Purchase Teseq ISN T8

    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 150 kHz to 30 MHz Frequency range
    • Price is for a pair of LI-125A line impedance stabilization networks
    • Fully compliant to CISPR 16-1-2 / ANSI C63.4
    • "Air-core" inductors to prevent saturation
    • Provides a near 1:1 (<0.5 dB insertion loss) 50Ω coaxial measurement port (type-N)
    • Provides a defined, stable, impedance to the Equipment Under Test (EUT)
    • Individual Calibration Included
    • Three Year Warranty
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 10 kHz to 400 MHz Frequency Range
    • Price is for a pair of LI-125A line impedance stabilization networks
    • Frequency range of 10 kHz to 400 MHz
    • Fully compliant with DO-160/ MIL-STD 461
    • “Air-core” inductors to prevent saturation
    • Individual Calibration Included
    • Three-Year Warranty
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 50 kHz to 30 MHz Frequency Range
    • Price is for a pair of LI-1100C line impedance stabilization networks
    • Fully compliant to CISPR 16-1-2 / ANSI C63.4
    • "Air-core" inductors to prevent saturation
    • Provides a near 1:1 (<0.5 dB insertion loss) 50Ω coaxial measurement port (type-N)
    • Provides a defined, stable, impedance to the Equipment Under Test (EUT)
    • Individual Calibration Included
    • Three Year Warranty
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Price is for a pair of LI-125A line impedance stabilization networks
    • Frequency Range: 150 kHz to 30 MHz
    • Integral Transient Limiter/10 dB Attenuator with
    • ON/OFF (bypass) Switch
    • Fully Compliant with CISPR 16-1-2/ANSI C63.4
    • Dual-Conductor Network with Universal Power
    • Receptacle to accept any EUT Plug
    • 20 Amps Current Handling Capability
    • Three-Year Warranty
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    $410.00
    • Purchase Com-Power ISN-T8 here
    • Frequency Range: 150 kHz to 30 MHz
    • For Unshielded Telecomunication Lines 1 to 4 balanced pairs
    • Complies with CISPR 16-1-2, CISPR 22/32
    • Individual Calibration Included
    $410.00
    Add to cart
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 9 kHz a 30 MHz frequency range
    • 63 A max output current
    • Large baseplate for optimal grounding
    • Local and remote control for PMM EMI receivers
    • Meets the requirements of several standards including IEC 60309, UL1682, UL1686
    Request Quote
    Typically Stocked
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 9 kHz to 30 MHz frequency range
    • Up to 300 A (continuous); 500 A (20 min.) rated output current
    • Suitable for DC to 60 Hz power lines
    • Built-in, selectable 250 µH coil (Choke)
    • Meets the requirements of several standards including CISPR 16-1-2, VDE 0876, FCC part 15, MIL-STD 461F
    • Fan air cooling
    • Available in single phase unit (see data sheet L1-500)
    Request Quote
    Typically Stocked
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 9 kHz a 30 MHz frequency range
    • 63 A max output current
    • Large baseplate for optimal grounding
    • Local and remote control for PMM EMI receivers
    • Meets the requirements of several standards including CISPR 16-1-2, VDE 0876, FCC part 15
    Request Quote
    Typically Stocked
    Request Quote/More Info
    Add to Compare
  • Quick view
    Request Quote
    Inquire for Qty In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Frequency Range: 50 - 800Hz
    • Current Rating: 50 Amps
    • Fully Compliant with DO-160F
    Request Quote
    Inquire for Qty In Stock
    Request Quote/More Info
    Add to Compare
Showing 37 - 48 of 65 items