Impedance Stabilization Networks (Power and Data Lines)

Impedance Stabilization Networks  also known as Artificial Mains Networks are the most common transducer to perform conducted emission testing. For testing electrical power lines a Line Impedance Stabilization Network (LISN) is required. To test data lines an Impedance StabilizatioN Network (ISN) is used.

Impedance Stabilization Networks (Power and Data Lines) There are 65 products.

per page
Showing 49 - 60 of 65 items
    • Frequency Range: DC - 400Hz
    • Current Rating: 50 Amps
    • Fully Compliant with MIL-STD-461F
    Inquire for Qty In Stock
    Request Quote/More Info
    • Similar to the LI-3P-200 Series Models, with added 50/250 uH air-core inductor 
    • Frequency Range: 9 kHz to 30 MHz
    • Current Rating: up to 100 Amps
    • Fully Compliant with CISPR 16-1-2/ANSI C63.4
    • 200 Series - Improved Frequency Range
    • Remote Switching of Line Under Test
    • Four-conductor Network appropriate for both 3Ø Delta and Wye Power Configurations
    • Three-Year Warranty
    In Stock
    Request Quote/More Info
    • 9kHz-30MHz 
    • V LISN
    • CISPR 16-1-2 ANSI C63.4 FCC, ETS, VCCI and VDE, MIL461E/F
    • N type /BNC Connector option
    Call for Availability
    Request Quote/More Info
    • Fully compliant to CISPR 16-1-2 / ANSI C63.4
    • "Air-core" inductors to prevent saturation
    • Provides a near 1:1 (<0.5 dB insertion loss) 50Ω coaxial measurement port (type-N)
    • Provides a defined, stable, impedance to the Equipment Under Test (EUT)
    • Individual Calibration Included
    • Three Year Warranty
    Typically In Stock
    Request Quote/More Info
    • For asymmetric disturbance measurements on PLT devices
    • Frequency range 1.6 to 30 MHz
    • LCL >55 dB
    • Conform with EN 50561-1
    • Supplied with Coupling Unit
    $2,460.00
    In Stock
    Request Quote/More Info
    • Frequency Range: 10kHz to 30 MHz
    • Current Rating: 16 Amps
    • Built in selectable transient limiter
    • Fully Compliant with CISPR 16-1-2
    Typically In Stock
    Request Quote/More Info
  • Request Quote/More Info
  • Request Quote/More Info
  • Request Quote/More Info
  • Request Quote/More Info
    • For disturbance voltage measurements on single-phase EUTs
    • Frequency Range: 9 kHz to 30 MHz
    • Current Rating: up to 16 Amps
    • Fully Compliant with CISPR 16-1-2/ANSI C63.4
    • Simulated impedance (50 μH + 5 Ω)
    • V-network in line with CISPR, EN, VDE, ANSI, FCC Part 15 and MIL-STD-461 D, E and F
    Typically In Stock
    Request Quote/More Info
    • Frequency Range: 9 kHz to 30 MHz
    • Current Rating: 16 Amps
    • Fully Compliant with CISPR 16-1-2

    Typically In Stock
    Request Quote/More Info
Showing 49 - 60 of 65 items