Impedance Stabilization Networks (Power and Data Lines)

Impedance Stabilization Networks also known as Artificial Mains Networks are the most common transducer to perform conducted emission testing. For testing electrical power lines a Line Impedance Stabilization Network (LISN) is required. To test data lines an Impedance StabilizatioN Network (ISN) is used.

Impedance Stabilization Networks (Power and Data Lines) There are 65 products.

View:
Grid
List

Showing 25 - 36 of 65 items

Quick view
Teseq ISN T800S Impedance Stabilization Network per CISPR 22/32 Figure D.3/G.3
For use with one, two, three, or four unscreened balanced pairs
Refers schematic circuit example in CISPR 22/32 Figure D.3/G.3
Intended for connection to cable category 3 and 5
1000BaseT and PoE application
Changeable pin-arrangements with RJ11 and RJ45
Request Quote
More
In Stock
Request Quote/More Info
Send Enquiry For Teseq ISN T800S Impedance Stabilization Network per CISPR 22/32 Figure D.3/G.3

Teseq ISN T800S Impedance Stabilization Network per CISPR 22/32 Figure D.3/G.3
For use with one, two, three, or four unscreened balanced pairs
Refers schematic circuit example in CISPR 22/32 Figure D.3/G.3
Intended for connection to cable category 3 and 5
1000BaseT and PoE application
Changeable pin-arrangements with RJ11 and RJ45
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
$1,995.00 New
Intrx LIN16-2 Single Phase Two Wire LISN for CISPR 16-1-2
- 9kHz-30MHz
- V LISN
- CISPR 16-1-2 ANSI C63.4 FCC, ETS, VCCI and VDE, MIL461E/F
- N type /BNC Connector option
$1,995.00
Add to cart More
Typically In Stock
Request Quote/More Info
Send Enquiry For Intrx LIN16-2 Single Phase Two Wire LISN for CISPR 16-1-2

Intrx LIN16-2 Single Phase Two Wire LISN for CISPR 16-1-2
9kHz-30MHz
V LISN
CISPR 16-1-2 ANSI C63.4 FCC, ETS, VCCI and VDE, MIL461E/F
N type /BNC Connector option
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
Schwarzbeck NNLK 8121 100 Amp Line Impedance Stabilization Network
- Frequency Range: 9 kHz - 30 MHz
- Current Rating: 4 x 50 (100) Amps
- Fully Compliant with CISPR 16-1-2/ANSI C63.4
- Connections: 4 Wing Terminals
- Impedance Simulation: 50 µH+5 Ω || 50 Ω
Request Quote
More
In Stock
Request Quote/More Info
Send Enquiry For Schwarzbeck NNLK 8121 100 Amp Line Impedance Stabilization Network

Schwarzbeck NNLK 8121 100 Amp Line Impedance Stabilization Network
Frequency Range: 9 kHz - 30 MHz
Current Rating: 4 x 50 (100) Amps
Fully Compliant with CISPR 16-1-2/ANSI C63.4
Connections: 4 Wing Terminals
Impedance Simulation: 50 µH+5 Ω || 50 Ω
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
PMM L3-32 Four Line 3-Phase LISN w/ V-Network, 32 Amps AC+DC
- 9 kHz a 30 MHz frequency range
- 32 Amps max output current
- Large baseplate for optimal grounding
- Built-in, selectable, 150 kHz high pass filter
- Artificial Hand circuit
- Local and remote control for PMM EMI receivers
- Meets the requirements of several standards including CISPR 16-1-2, VDE 0876, FCC part 15
Request Quote
More
Typically Stocked
Request Quote/More Info
Send Enquiry For PMM L3-32 Four Line 3-Phase LISN w/ V-Network, 32 Amps AC+DC

PMM L3-32 Four Line 3-Phase LISN w/ V-Network, 32 Amps AC+DC
9 kHz a 30 MHz frequency range
32 Amps max output current
Large baseplate for optimal grounding
Built-in, selectable, 150 kHz high pass filter
Artificial Hand circuit
Local and remote control for PMM EMI receivers
Meets the requirements of several standards including CISPR 16-1-2, VDE 0876, FCC part 15
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
PMM L3-100 Three Phase 100 Amp LISN for CISPR 16-1-2
- 9 kHz a 30 MHz frequency range
- 100 A max output current
- Large baseplate for optimal grounding
- Local and remote control for PMM EMI receivers
- Meets the requirements of several standards including CISPR 16-1-2, VDE 0876, FCC part 15
Request Quote
More
In Stock
Request Quote/More Info
Send Enquiry For PMM L3-100 Three Phase 100 Amp LISN for CISPR 16-1-2

PMM L3-100 Three Phase 100 Amp LISN for CISPR 16-1-2
9 kHz a 30 MHz frequency range
100 A max output current
Large baseplate for optimal grounding
Local and remote control for PMM EMI receivers
Meets the requirements of several standards including CISPR 16-1-2, VDE 0876, FCC part 15
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
Fischer Custom Communications FCC-LISN-50-25-1-2, 50 uH, 25 Amp, 2 Line LISN
- Frequency Range: DC - 60Hz
- Current Rating: 25 Amps
Request Quote
More
Inquire for Qty In Stock
Request Quote/More Info
Send Enquiry For Fischer Custom Communications FCC-LISN-50-25-1-2, 50 uH, 25 Amp, 2 Line LISN

Fischer Custom Communications FCC-LISN-50-25-1-2, 50 uH, 25 Amp, 2 Line LISN
Frequency Range: DC - 60Hz
Current Rating: 25 Amps
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
Com-Power LI-125A 150 kHz - 30 MHz LISN, 50 uH, 25 Amps (Discontinued)
- Price is for a pair of LI-125A line impedance stabilization networks
- Fully compliant to CISPR 16-1-2 / ANSI C63.4
- "Air-core" inductors to prevent saturation
- Provides a near 1:1 (<0.5 dB insertion loss) 50Ω coaxial measurement port (type-N)
- Provides a defined, stable, impedance to the Equipment Under Test (EUT)
- Individual Calibration Included
- Three Year Warranty on New Units
Request Quote
More
Typically In Stock
Request Quote/More Info
Send Enquiry For Com-Power LI-125A 150 kHz - 30 MHz LISN, 50 uH, 25 Amps (Discontinued)

Com-Power LI-125A 150 kHz - 30 MHz LISN, 50 uH, 25 Amps (Discontinued)
Price is for a pair of LI-125A line impedance stabilization networks
Fully compliant to CISPR 16-1-2 / ANSI C63.4
"Air-core" inductors to prevent saturation
Provides a near 1:1 (<0.5 dB insertion loss) 50Ω coaxial measurement port (type-N)
Provides a defined, stable, impedance to the Equipment Under Test (EUT)
Individual Calibration Included
Three Year Warranty on New Units
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
Com-Power LI-4100 10 kHz to 10 MHz Line Impedance Stabilization Network
10 kHz to 10 MHz Frequency Range
Price is for a pair of LI-125A line impedance stabilization networks
Frequency range of 10 kHz to 10 MHz
Fully compliant with MIL-STD 461
100 Amp(AC) (forced air cooling)
“Air-core” inductors to prevent saturation
Individual Calibration Included
Three-Year Warranty
Request Quote
More
Typically In Stock
Request Quote/More Info
Send Enquiry For Com-Power LI-4100 10 kHz to 10 MHz Line Impedance Stabilization Network

Com-Power LI-4100 10 kHz to 10 MHz Line Impedance Stabilization Network
10 kHz to 10 MHz Frequency Range
Price is for a pair of LI-125A line impedance stabilization networks
Frequency range of 10 kHz to 10 MHz
Fully compliant with MIL-STD 461
100 Amp(AC) (forced air cooling)
“Air-core” inductors to prevent saturation
Individual Calibration Included
Three-Year Warranty
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
Com-Power LI-150A 150 kHz - 30 MHz LISN, 50 Amps, 50 uH for CISPR 16-1-2/ANSI C63.4
- Price is for a pair of LI-125A line impedance stabilization networks
- Fully compliant to CISPR 16-1-2 / ANSI C63.4
- "Air-core" inductors to prevent saturation
- Provides a near 1:1 (<0.5 dB insertion loss) 50Ω coaxial measurement port (type-N)
- Provides a defined, stable, impedance to the Equipment Under Test (EUT)
- Individual Calibration Included
- Three Year Warranty
Request Quote
More
Typically In Stock
Request Quote/More Info
Send Enquiry For Com-Power LI-150A 150 kHz - 30 MHz LISN, 50 Amps, 50 uH for CISPR 16-1-2/ANSI C63.4

Com-Power LI-150A 150 kHz - 30 MHz LISN, 50 Amps, 50 uH for CISPR 16-1-2/ANSI C63.4
Price is for a pair of LI-125A line impedance stabilization networks
Fully compliant to CISPR 16-1-2 / ANSI C63.4
"Air-core" inductors to prevent saturation
Provides a near 1:1 (<0.5 dB insertion loss) 50Ω coaxial measurement port (type-N)
Provides a defined, stable, impedance to the Equipment Under Test (EUT)
Individual Calibration Included
Three Year Warranty
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
Rigol EMI Precompliance Test Equipment Bundle
- Rigol DSA710 100kHz to 1GHz Spectrum Analyzer
  100kHz to 1GHz Frequency Range
  Displayed average noise level (DANL) <-155dBm/Hz typ. with preamplifier on
  Minimum resolution bandwidth (RBW) 100Hz
  Phase noise <-80dBc/Hz @10kHz offset
  Level measurement uncertainty <1.5dB
  8" (800 x 480) high-definition display
  Linear and logarithmic frequency axis
- EMI-DSA800
  For DSA800 Series Models
  EMI Filter & Quasi-Peak Detector Kit
  Option can be added by a software key
- NFP-3
  30MHz to 3GHz Frequency Range
  One set includes four types of probe, provides optimizing sensitivity and resolution
  Minimum resolution: 2mm; able to capture near field radiation of single circuit line
  Applicable for electromagnetic leakage testing inside the cable
- S1210 EMIs
  Introduces the workspace concept - Manage multiple measurements easily
  'Demo' mode included - Trial the software without an instrument and a licence
Request Quote
More
In Stock
Request Quote/More Info
Send Enquiry For Rigol EMI Precompliance Test Equipment Bundle

Rigol EMI Precompliance Test Equipment Bundle
Rigol DSA710 100kHz to 1GHz Spectrum Analyzer
100kHz to 1GHz Frequency Range
Displayed average noise level (DANL) <-155dBm/Hz typ. with preamplifier on
Minimum resolution bandwidth (RBW) 100Hz
Phase noise <-80dBc/Hz @10kHz offset
Level measurement uncertainty <1.5dB
8" (800 x 480) high-definition display
Linear and logarithmic frequency axis
EMI-DSA800
For DSA800 Series Models
EMI Filter & Quasi-Peak Detector Kit
Option can be added by a software key
NFP-3
30MHz to 3GHz Frequency Range
One set includes four types of probe, provides optimizing sensitivity and resolution
Minimum resolution: 2mm; able to capture near field radiation of single circuit line
Applicable for electromagnetic leakage testing inside the cable
S1210 EMIs
Introduces the workspace concept - Manage multiple measurements easily
'Demo' mode included - Trial the software without an instrument and a licence
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
Rohde & Schwarz Precompliance EMI Emissions Test Equipment Package
- FPC1000 Low-Cost Spectrum Analyzer for Emissions Testing
  Frequency range: 5 kHz to 1 GHz, Upgradable to 2 GHz or 3 GHz
  Resolution bandwidth settings down to 1 Hz
  10.1" WXGA (1366 x 768 pixel) display
  Wi-Fi-enabled w/ remote control (included)
  Easy virtual control w/ iOS/Android/PC
  Low noise floor / High max. input power
  Receiver mode for EMI debugging on circuit boards, integrated circuits, cable shielding, etc.
- HM6050-2 Line Impedance Simulation Network
  Frequency range from 9 kHz to 30 MHz
  Built-in transient limiter
  Artificial hand connector
- HZ540 Near Field Probes
  Frequency range from 100 kHz to 1/3 GHz
  Probes included (1 × Electrical Field Probe, 1 × Magnetic Field Probe, 1 × High Impedance Probe)
- EMC PreCom
  EMC Precompliance Software (EMC PreCom) -- EMI module part of the HMExplorer software for conducting precompliance measurements (only with HO720 USB/RS-232 or the optional HO732 Ethernet/USB interface)
Request Quote
More
In Stock
Request Quote/More Info
Send Enquiry For Rohde & Schwarz Precompliance EMI Emissions Test Equipment Package

Rohde & Schwarz Precompliance EMI Emissions Test Equipment Package
FPC1000 Low-Cost Spectrum Analyzer for Emissions Testing
Frequency range: 5 kHz to 1 GHz, Upgradable to 2 GHz or 3 GHz
Resolution bandwidth settings down to 1 Hz
10.1" WXGA (1366 x 768 pixel) display
Wi-Fi-enabled w/ remote control (included)
Easy virtual control w/ iOS/Android/PC
Low noise floor / High max. input power
Receiver mode for EMI debugging on circuit boards, integrated circuits, cable shielding, etc.
HM6050-2 Line Impedance Simulation Network
Frequency range from 9 kHz to 30 MHz
Built-in transient limiter
Artificial hand connector
HZ540 Near Field Probes
Frequency range from 100 kHz to 1/3 GHz
Probes included (1 × Electrical Field Probe, 1 × Magnetic Field Probe, 1 × High Impedance Probe)
EMC PreCom
EMC Precompliance Software (EMC PreCom) -- EMI module part of the HMExplorer software for conducting precompliance measurements (only with HO720 USB/RS-232 or the optional HO732 Ethernet/USB interface)
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
Intrx Single Line LISN for MIL 461E/F and DO160 Requirements
- 9kHz-30MHz
- V LISN
- CISPR 16-1-2 ANSI C63.4 FCC, ETS, VCCI and VDE, MIL461E/F
- N type /BNC Connector option
Request Quote
More
In Stock
Request Quote/More Info
Send Enquiry For Intrx Single Line LISN for MIL 461E/F and DO160 Requirements

Intrx Single Line LISN for MIL 461E/F and DO160 Requirements
9kHz-30MHz
V LISN
CISPR 16-1-2 ANSI C63.4 FCC, ETS, VCCI and VDE, MIL461E/F
N type /BNC Connector option
First Name Last Name Email Phone Subject Message or
Add to Compare