> Compliance Standards>International (IEC/EN)>EN/IEC 61000-3-2>Spitzenberger PAS 5000 4-Quadrant AC Power Amplifier

EN/IEC 61000-3-2

Quick Links

Information

Viewed products

Spitzenberger 4-Quadrant Power AC/DC Amplifier PAS 5000 View larger

Spitzenberger PAS 5000 4-Quadrant AC Power Amplifier

Used

  • Extremely low harmonic distortion - even under very non-linear load conditions
  • Very fast slew rate > 52V/μs (rise time < 5μs at 230Vrms as required by IEC/EN 61000-4-11)
  • Operates from DC up to 5kHz large signal bandwidth (-3dB) - optional up to 30kHz
  • Small signal bandwidth up to 50kHz or 100kHz
  • High long-term overload characteristic (up to 1-hour)
  • High short-term overload characteristic (for 5 … 10mins.)
  • Very high peak-load ability (up to 5ms)
  • Very low internal resistance

More details

Request Quote

Request Quote/More Info

PDF Downloads

PAS5000

PDF Downloads (338.71k)

Test Equipment Description

The Spitzenberger 4-Quadrant Amplifier PAS 5000 for equipment intended to be connected to the 16A public low voltage network harmonic current limits are defined in the IEC/EN 61000-3-2. In the normative annex A2 of this standard the requirements for the voltage source under load conditions are defined. Point c) of the Annex A2 describes the limits of harmonic voltage components of the voltage source. The EUT has to be connected as in normal operation. This requirement has to be met during testing EUT’s of classes A ... D (EUT type classification of the IEC/EN 61000-3-2). Point d) describes the waveform (crest-factor!). The waveform crest-factor has to be taken in account, when testing EUT’s of class C and D of this standard.

The PAS 5000 power amplifier supplys continuous power and non-linear current consumption

  • PAS 5000 nominal power: 5kVA
  • PAS 5000 nominal current: 18.5Arms
  • The PAS 5000 was sourcing a current of > 41.5Arms and a peak current of > 106A

Associated EMC Test Equipment

23 other products in the same category: