EN/IEC 61000-4-2

Quick Links

Information

Viewed products

EMC Partner TRA2000 + CDN2000A-60-20 Transient Generator for Surge/EFT Testing View larger

EMC Partner TRA2000 + CDN2000A-60-20 Transient Generator for Surge, EFT, and PFQ Testing

Used

  • All relevant parameters in one display
  • Stand-alone equipment for automated EMC tests without a PC
  • Magnetic field up to full levels
  • Protocol when needed
  • The GENECS Software is one of the most sophisticated software for transient immunity test
  • The TRA2000 + CDN2000A-60-20 is a Complementary package with a 3-phase coupling network up to 480v
  • Surge, Ring, EFT, PQF Testing with a 3 phase, 100 amp, 480-volt coupling network.

More details

Typically In Stock

Request Quote/More Info

Specifications

Standards Met IEC 61000-4-2, 61000-4-4, 61000-4-5
Pulse voltage (open circuit)250 V to 4000 V
Impedance2 Ohms
Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse)
Pulse conforms to IEC/EN 61000-4-5
ParameterValue
Pulse current (short circuit)125 A to 2000 A
Couplingsingle phase 16A AC/DC CDN
Repetition time8000 at 1000 V or 1000 at 4000 V
Pulse repetition3s or 5s at 4000 V
Polaritypositive / negative
Coupling260 V ac 50/60 Hz 16 A
Dips, Interrupts & Variations
Conforms to IEC/EN 61000-4-11, IEC/EN 61000-4-29
ParameterValue
Test duration0,001 ms up to 20 ms
Peak inrush current capability500 A Peak
Burst (EFT) 5/50 ns
Pulse conforms to IEC/EN 61000-4-4
ParameterValue
Pulse amplitudeAdjustable voltage range: 250 V to 4400 V Voltage amplitude into 50 Ohms: 125 V to 2000 V (± 10%) Voltage amplitude into 1000 Ohms: 250 V to 4000 V (± 20%)
Burst frequency1 kHz up to 1 MHz
Polaritypositive / negative
Uvar with optional variacFrequency range without variac: DC up to 400 Hz Frequency range with variac: 48 Hz to 60 Hz
Burst time1 ms up to 1000 ms
Dimensions23.6in x 21.6in x 7.48 in ( Length x Width x Height)
Weight74.95 Lbs

Test Equipment Description

  • The EMC Partner Transient 2000 ESD, EFT, SURGE, Dips, Variation Immunity, and PQF Tester features a single phase 16A AC/DC CDN enabling all power-borne immunity tests to be performed on a single EUT without unplugging or reconfiguring the test set-up.

  • The TRA2000 + CDN2000A-60-20 Combination is a Complementary equipment package allowing a 3-phase coupling network up to 480v.
  • The  EMC Partner TRANSIENT 2000 Tester simulates transients of different interference sources such as:
    indirect lighting in electronic systems, human body electrostatic discharges, switched inductance (Burst), power supply interruptions, and other PQF variations.

  • The EMC Partner TRANSIENT 2000 performs all of the following transient tests on electronic equipment as required for the CE-mark up to full levels: ESD, EFT, surge, dips, a.c. magnetic field, surge magnetic field, and common mode tests. A large range of accessories for different applications is available: MF antennas, three-phase couplers, verification sets, coupling kits, etc.

  • The TRA 2000 complies with IEC 61000-4, -5, -11

24 other products in the same category: