EN/IEC 61000-4-2

Viewed products

View larger

EMC Partner TRA2000 Transient Generator for Surge/EFT Testing

Condition Used

All relevant parameters in one display
Stand-alone equipment for automated EMC test without a PC
Magnetic field up to full levels
Protocol when needed
The GENECS Software is one of the most sophisticated software for transient immunity tests
Dialogue line language can be chosen

The EMC Shop

$1,950.00 + Shipping

Calibration

Rental Period

Standards Met	IEC 61000-4-2, 61000-4-4, 61000-4-5
Pulse voltage (open circuit)	250 V to 4000 V
Impedance	2 Ohms
Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse) Pulse conforms to IEC/EN 61000-4-5
Parameter	Value
Pulse current (short circuit)	125 A to 2000 A
Coupling	single phase 16A AC/DC CDN
Repetition time	8000 at 1000 V or 1000 at 4000 V
Pulse repetition	3s or 5s at 4000 V
Polarity	positive / negative
Coupling	260 V ac 50/60 Hz 16 A
Dips, Interrupts & Variations Conforms to IEC/EN 61000-4-11, IEC/EN 61000-4-29
Parameter	Value
Test duration	0,001 ms up to 20 ms
Peak inrush current capability	500 A Peak
Burst (EFT) 5/50 ns Pulse conforms to IEC/EN 61000-4-4
Parameter	Value
Pulse amplitude	Adjustable voltage range: 250 V to 4400 V Voltage amplitude into 50 Ohms: 125 V to 2000 V (± 10%) Voltage amplitude into 1000 Ohms: 250 V to 4000 V (± 20%)
Burst frequency	1 kHz up to 1 MHz
Polarity	positive / negative
Uvar with optional variac	Frequency range without variac: DC up to 400 Hz Frequency range with variac: 48 Hz to 60 Hz
Burst time	1 ms up to 1000 ms
Dimensions	550mm x 600mm x 190mm (width x depth x height)
Weight	34 kg

The EMC Partner Transient 2000 ESD, EFT, SURGE, Dips, Variation Immunity Tester features a single phase 16A AC/DC CDN enabling all power borne immunity tests to be performed on a single EUT without unplugging or reconfiguring the test set-up.
The EMC Partner TRANSIENT 2000 Tester simulates transients of different interference sources such as: indirectlightning in electronic systems, human body electrostatic discharges, switched inductance (Burst), power supply interruptions and variations.
The EMC Partner TRANSIENT 2000 performs all of the following transient tests on electronic equipment as required for the CE-mark up to full levels: ESD, EFT, surge, dips, a.c. magnetic field,surge magnetic field and common mode tests. A large range of accessories for different applications is available: MF antennas, three phase couplers,verification sets,coupling kits, etc.
The TRA 2000 complies with IEC 61000-4-2, -4, -5, -8, -9, -11, -12p, -16, -29p.