MIL-STD-461 CS114

Quick Links

Information

Viewed products

RFCI-MIL RF Conducted...
10 kHz - 250 MHz Frequency Range 75...

RFCI-MIL RF Conducted Susceptibility Test System for MIL-STD 461 CS114

View larger

RFCI-MIL RF Conducted Susceptibility Generator for BCI Testing

Condition New

10 kHz - 250 MHz Frequency Range
75 Watt Integrated Amplifier
Achieve 40 Vrms with a BCI probe
Computer Based System (USB controlled)
Self Calibration with Injection Probe
RF generator, amplifier and RF Voltmeter usable as independent instruments
Connections: EUT "Fail", EUT monitoring by external multimeter

The EMC Shop

More details

Typically In Stock

Request Quote

Request Quote/More Info

Send to a friend
Send to a friend
RFCI-MIL RF Conducted Susceptibility Generator for BCI Testing
10 kHz - 250 MHz Frequency Range
75 Watt Integrated Amplifier
Achieve 40 Vrms with a BCI probe
Computer Based System (USB controlled)
Self Calibration with Injection Probe
RF generator, amplifier and RF Voltmeter usable as independent instruments
Connections: EUT "Fail", EUT monitoring by external multimeter
Recipient :
Name of your friend ^* :
E-mail address of your friend ^* :
^* Required fields
or Cancel
Print

Specifications

Supply Voltage	100 to 240 VAC 50/60 Hz autoranging
Frequency Range	10 kHz to 250 MHz
Standards Met	MIL-STD 461 CS114, IEC / EN 61000-4-6
RF Connector	BNC, 50 Ohm
Operating Temperature	0°C to 40°C
connectors	BNC
Frequency range	100 kHz - 250 MHz
Signal level	46 dB ±1.5 dB
Output Impedance	50 Ohm nom
Resolution	0.1 Hz
Dimensions	450 x 150 x 480 mm ( 17.7 x 6 x 19 in)
Weight	11 kg / 24 lbs
Connectors	BNC socket, 50 Ω

Test Equipment Description

The RFCI-MIL RF Conducted Susceptibility Test System generates interferences as defined in MIL-STD-461 CS114 - Susceptibility to conducted disturbances, induced by radio-frequency fields. The standard described a test setup, in which can influence these high-frequency interferences without a complicated structure with antennas, field instrumentation and shielded rooms on an EUT. Via coupling networks and coupling clamp’s, sine waves are induced directly into power and signal lines. The EUT keeps its usual place in the installation; the complete unit can be tested in its function.

RFCI-MIL RF Conducted Susceptibility Test System Software Overview

RFCI-MIL RF Conducted Susceptibility Test System Features

10 kHz - 250 MHz Frequency Range
75 Watt Integrated Amplifier
Computer-based system (controlled by USB)
Self-calibration of the test system (generator and CDN)
RF-generator, amplifier and RF-voltmeter may as well be used as stand-alone devices
Connections: EUT “Fail”, EUT monitoring by external multimeter, e.g. DUT signal
Calibration of BCI Probe is performed automatically
Extensive additions like attenuators, calibration kits, etc. deliverable