> Compliance Standards>Military & Aerospace Standards>MIL-STD-461
MIL-STD-461

Test equipment for all versions of MIL-STD-461 including Version G released Decemeber 2015.

MIL-STD-461 Emission and Susceptibility Testing Breakdown

Conducted emissions requirements are designated by CE

Radiated emissions requirements are designated by RE

Conducted susceptibility requirements are designated by CS

Radiated susceptibility requirements are designated by RS

Get Application Support, Pricing, Lead Time and More: Contact Form

MIL-STD-461 There are 134 products.

Subcategories

  • Radiated Susceptibility

    MIL-STD-461 Radiated Susceptibility Description:

    The EMC Shop stock a variety of MIL-STD-461 Radiated Susceptibility test equipment for Magnetic Field, Electric Field, and Transient Electromagnetic Field applications.

    Get Application Support, Pricing, Lead Time and More: Contact Form

  • Conducted Susceptibility

    The EMC can provide test eqipment for subcategories of MIL-STD-461; Conducted Susceptibility with applications for:

    Power Leads, Antenna Port, Intermodulation, Rejection of Undesired Signals, Cross-Modulation, Structure Current, Bulk Cable Injection, Impulse Excitation, Damped Sinusoidal Transients, Cables and Power Leads, Lightning Induced Transients, and Personnel Borne Electrostatic Discharge

    Get Application Support, Pricing, Lead Time and More: Contact Form

  • Radiated Emissions

    The EMC Shop stocks and delivers a wide array MIL-STD-461 Radiated Emissions equipment. Applications include: Magnetic Field, Electric Field,Antenna Spurious and Harmonic Outputs.

  • Conducted Emissions

    MIL-STD-461 conducted emission testing equipments for power leads, antenna terminals and more. The EMC Shop carries a variety of testing equipment for all MIL-STD-461 compliance tests.

    The conducted emissions testing for MIL-STD-461 is similar to DO-160 Conducted Emissions testing.

    CE101 Applicability

    MIL-STD-461 CE101 requirement is applicable for power leads, including returns, that obtain power from other sources not part of the EUT.

    For AC applications, this requirement is applicable starting at the second harmonic of the EUT power frequency.

    CE101 Test Procedure

    This test procedure is used to verify that electromagnetic emissions from the EUT do not exceed the specified requirements for power input leads including returns. 5.4.3.2 Test equipment. The test equipment shall be as follows:

    a. Measurement receivers

    b. Current probes

    c. Signal generator

    d. Data recording device

    e. Oscilloscope

    f. Resistor (R)

    g. LISNs

per page
Showing 73 - 84 of 134 items
  • Quick view
    • 10 kHz–400 MHz Frequency Range
    • Bulk Current Injection (BCI) RF Conducted Immunity System
    • 100 Watts nominal

    Complete testing solutions to the following standards:

    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • EN 55103-1, 2
    • EN/IEC61000-4-8
    • Automotive
    • MIL-STD 
    • Generation and measurement of magnetic fields from DC up to 250 kHz
    • Field strengths up to 1000 A/m 
    • Additional Options (separate)
      • Sensor coils
      • Helmholtz coils
      • Test adapter
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 500 V to 15 kV peak
    • Transient Pulse Transformer
    • Designed to be plugged into the SERIES terminals of the Solar Model 8282-1 Spike Generator
    • 4.75" wide x 4.35 " high x 4.75" insulated case measuring
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 115 V to 230 V Power Line Voltages
    • Equipped with a male connector on the 115 V winding
    • Female connector on the 230 V winding
    • Connectors are the international style IEC-320/CEE 22
    • Mating plugs not supplied
    • Rated at 800 W, 50-60 Hz

    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Audio Isolation Transformer
    • For conducted audio frequency susceptibility testing
    • Provides a convenient bench model unit with three-way binding posts on primary and output voltmeter leads. Standard 0.75" spacing of binding posts allows use of standard plugs. High current secondary uses 1/4-20 threaded studs.
    • Capable of handling the audio power required by EMI specifications and up to 50 A of AC or DC through the secondary in series with the test sample.
    • May be used as a pickup device or an isolating inductor in other tests.
    • Suitable for fastening to the bench top in permanent test setups.
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Modular shielded room (or occasionally a welded room)
    • Lined inside with RF and/or microwave absorbing ("Anechoic") material
    • Anechoic material may be placed on the walls and ceiling
    • It can be placed on all six sides of the room (As known as "Fully Anechoic")
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Manufacturer Refurbished and Rental Units in Stock
    • 2 GHz - 18 GHz Frequency Range
    • Linear or Circular Polarization (With Hybrid)
    • Low Side Lobes
    • Compact Design
    • Flat Gain For Upper 2/3 of Range
    • Flexible Mounting Schemes
      -- Flange for Wall Mounting
      -- Bracket for Tripod Mounting
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 100 Day Warranty
    • Fresh Calibration from AH Systems
    • Ships Same Day
    • Frequency Range of 9 KHz to 60 MHz
    • Individually Calibrated (Calibration included per ARP-958)
    • Ideal for MIL-STD 461F
    • High Sensitivity
    • Battery Pack and Charger
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 10 kHz – 500 MHz Frequency
    • For laboratory and field testing
    • RF current range is 50 amperes CW and 100 amperes peak pulse with a duty cycle of 0.1
    • Maximum primary powerline current is 350 amperes from DC – 400Hz
    • ZtΩ1: 8
    • dBΩ1: 18
    • DC to 400 Hz: 350 amperes
    • Peak Pulse Current2 : 100 amperes
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • State of the art, reliable solid state broadband RF technology
    • Instantaneous Broadband Output from 26.5 to 40 GHz
    • 30 Watts P1dB AVG
    • Class AB linear GaAsFET Design
    • Ideal for MIL-STD 461, DO-160 and other RI compliance testing
    Request Quote
    Call for Availability
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Integrated signal generator 80 MHz to 6 GHz
    • Integrated RF switch network
    • Integrated 3 freely configurable pulse modulators (1 μs to 200 s) for radar pulse profiles
    • Multiple EUT monitoring options
    • 3.5“ TFT color display
    • Safety interlock function
    • Remote control via USB, RS232 or LAN
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Most compact equipment for ripple noise on ac/dc supplies and magnetic fields
    • Built-in LF signal generator
    • Built-in LF amplifier
    • Built-in LF transformer 2:
    • Built-in frequency-selective voltage and current meter
    • Built-in load resistors
    • Automatic self-calibration
    • Frequency Range: 10 Hz - 250 kHz
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
Showing 73 - 84 of 134 items