Send Enquiry For Noiseken LSS-15SC Lightning Surge Simulator
Noiseken LSS-15SC Lightning Surge Simulator
- Surge Immunity Test Requirements of IEC Pub. 801-5.
- Provided with a Surge Generator
- With Injecting Unit
Cart 0 Product Products (empty)
No products
TBD Shipping
$0.00 + Shipping Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
Total shipping TBD
Total + Shipping
Combination Wave/Surge Generators
Combination Wave/Surge Generators
Combination wave generators are used to meet IEC/EN 61000-4-5, ANSI (IEEE) C62.41 and other surge immunity standards. The EMC Shop has a wide selection of combination wave generators and associated coupling/decouping networks in stock.
Also See - IEC 61000-4-5 Surge Immunity Testing
Also See - IEC 61000-4-4 EFT Testing
Also See - IEC 61000-4-6 Testing and Setup
Video Overview - Surge4-5 Combination Wave Generator
Getting Started witha Combination Wave Generator
Combination wave/surge generators are typically benchtop, but heavy equipment. Testing on data and three phase power lines require additional coupling/decoupling networks. Pre programmed test sequences for surge immunity allows you to begin testing once coupling in your EUT and properly grounding the test setup.
Combination Wave/Surge Generators There are 51 products.
Subcategories
4 kV Surge Generators
BCI Testing & Equipment Automotive EMI/EMC Testing EFT/Burst Generators LISN's
Combination Wave/Surge generators are required to meet IEC/EN 61000-4-5, ANSI (IEEE) 62.41 and other conducted immunity standards requiring a surge EMC test. The EMC Shop stocks all types of Combination Wave/Surge generators for compliance and pre-compliance testing. Rent or buy Combination/Surge generators for individual tests or multifunction generators to complete an assortment of tests in a compact solution. Most systems can be easily upgraded to include additional tests as required.
Get Application Support, Pricing, Lead Time and More: Contact Form
Combination Wave/Surge generators are typically benchtop, but heavy equipment. When doing testing on three phase power lines systems usually require much larger coupling/decoupling networks which substantially increase system size. EM test environments with ground planes with connections to earth are required to safely use transient generators.
Common Combination Wave/Surge Tests
- IEC/EN 61000-4-5 specifies two Combination Wave pulses: Open Circuit Voltage Short Circuit Current
- A common combination wave test is the 1.2/50 & 8/20
- Another common wave test is the 10/700 & 5/320, or otherwise known as telecom wave
- The four standard test levels , excluded of EUT: 0.5, 1, 2, 4 kV (0.25, 0.5, 1, 2 kA)
6 kV Surge Generators
BCI Testing & Equipment Automotive EMI/EMC Testing EFT/Burst Generators LISN's
Combination Wave/Surge generators are required to meet IEC/EN 61000-4-5, ANSI (IEEE) 62.41 and other conducted immunity standards requiring a surge EMC test. The EMC Shop stocks all types of Combination Wave/Surge generators for compliance and pre-compliance testing. Rent or buy Combination/Surge generators for individual tests or multifunction generators to complete an assortment of tests in a compact solution. Most systems can be easily upgraded to include additional tests as required.
Get Application Support, Pricing, Lead Time and More: Contact Form
Combination Wave/Surge generators are typically benchtop, but heavy equipment. When doing testing on three phase power lines systems usually require much larger coupling/decoupling networks which substantially increase system size. EM test environments with ground planes with connections to earth are required to safely use transient generators.
Common Combination Wave/Surge Tests
- IEC/EN 61000-4-5 specifies two Combination Wave pulses: Open Circuit Voltage Short Circuit Current
- A common combination wave test is the 1.2/50 & 8/20
- Another common wave test is the 10/700 & 5/320, or otherwise known as telecom wave
- The four standard test levels , excluded of EUT: 0.5, 1, 2, 4 kV (0.25, 0.5, 1, 2 kA)
10 kV Surge Generators
BCI Testing & Equipment Automotive EMI/EMC Testing EFT/Burst Generators LISN's
Combination Wave/Surge generators are required to meet IEC/EN 61000-4-5, ANSI (IEEE) 62.41 and other conducted immunity standards requiring a surge EMC test. The EMC Shop stocks all types of Combination Wave/Surge generators for compliance and pre-compliance testing. Rent or buy Combination/Surge generators for individual tests or multifunction generators to complete an assortment of tests in a compact solution. Most systems can be easily upgraded to include additional tests as required.
Get Application Support, Pricing, Lead Time and More: Contact Form
Combination Wave/Surge generators are typically benchtop, but heavy equipment. When doing testing on three phase power lines systems usually require much larger coupling/decoupling networks which substantially increase system size. EM test environments with ground planes with connections to earth are required to safely use transient generators.
Common Combination Wave/Surge Tests
- IEC/EN 61000-4-5 specifies two Combination Wave pulses: Open Circuit Voltage Short Circuit Current
- A common combination wave test is the 1.2/50 & 8/20
- Another common wave test is the 10/700 & 5/320, or otherwise known as telecom wave
- The four standard test levels , excluded of EUT: 0.5, 1, 2, 4 kV (0.25, 0.5, 1, 2 kA)
15 kV Surge Generators
BCI Testing & Equipment Automotive EMI/EMC Testing EFT/Burst Generators LISN's
Combination Wave/Surge generators are required to meet IEC/EN 61000-4-5, ANSI (IEEE) 62.41 and other conducted immunity standards requiring a surge EMC test. The EMC Shop stocks all types of Combination Wave/Surge generators for compliance and pre-compliance testing. Rent or buy Combination/Surge generators for individual tests or multifunction generators to complete an assortment of tests in a compact solution. Most systems can be easily upgraded to include additional tests as required.
Get Application Support, Pricing, Lead Time and More: Contact Form
Combination Wave/Surge generators are typically benchtop, but heavy equipment. When doing testing on three phase power lines systems usually require much larger coupling/decoupling networks which substantially increase system size. EM test environments with ground planes with connections to earth are required to safely use transient generators.
Common Combination Wave/Surge Tests
- IEC/EN 61000-4-5 specifies two Combination Wave pulses: Open Circuit Voltage Short Circuit Current
- A common combination wave test is the 1.2/50 & 8/20
- Another common wave test is the 10/700 & 5/320, or otherwise known as telecom wave
- The four standard test levels , excluded of EUT: 0.5, 1, 2, 4 kV (0.25, 0.5, 1, 2 kA)
30 kV Lightning Surge Simulators
Combination Wave/Surge generators are required to meet IEC/EN 61000-4-5, ANSI (IEEE) 62.41 and other conducted immunity standards requiring a surge EMC test. The EMC Shop stocks all types of Combination Wave/Surge generators for compliance and pre-compliance testing. Rent or buy Combination/Surge generators for individual tests or multifunction generators to complete an assortment of tests in a compact solution. Most systems can be easily upgraded to include additional tests as required.
Get Application Support, Pricing, Lead Time and More: Contact Form
Combination Wave/Surge generators are typically benchtop, but heavy equipment. When doing testing on three phase power lines systems usually require much larger coupling/decoupling networks which substantially increase system size. EM test environments with ground planes with connections to earth are required to safely use transient generators.
Common Combination Wave/Surge Tests
- IEC/EN 61000-4-5 specifies two Combination Wave pulses: Open Circuit Voltage Short Circuit Current
- A common combination wave test is the 1.2/50 & 8/20
- Another common wave test is the 10/700 & 5/320, or otherwise known as telecom wave
- The four standard test levels , excluded of EUT: 0.5, 1, 2, 4 kV (0.25, 0.5, 1, 2 kA)
Noiseken LSS-15SC Lightning Surge Simulator
Call for Lead Time- Surge Immunity Test Requirements of IEC Pub. 801-5.
- Provided with a Surge Generator
- With Injecting Unit
3ctest SG 5020G Multifunctional Surge Test System
In Stock- Color touch screen 7 inch LCD
- PLC controlled automatic control system
- intelligent HV mains charging mode
- discharging ball-gap switch
- automatic judgment of multiple malfunctions, visual and audible alarm
- RS232 communication port for remote control
- internal MDO3012 oscilloscope, automatically calculate waveform parameters with measurement and analysis system
- internal safety test box to make components test safer
- 19 inch standard cabinet installation
Standard
- IEC 61000-4-5
- IEC 61643-1
- IEC 61010
- IEC 60664
- GB/T 17626.5
- ANSI/IEEE C62.41
- ITU-T K.20
- ITU T K.44
- ITU T K.45
3ctest CWS 600G/SPN 15100T High Voltage High-Power Intelligent Lightning
In Stock- EUT DC load capacity: DC 1500V 100A
- EUT AC load capacity: AC 700V 100A three-phase five wire
- Semi-conductor switch technology, EUT power automatic switching over
- EUT voltage and current detection
- Overvoltage, over current and overheating protection
- Setting test voltage, polarity and phase sync angle by scheduling and fully automatic network switching over
- Phase angle superposition for any line
Standard
- IEC 61000-4-5
- IEC 61000-6-2
- IEC 61000-6-1
- GB/T 17626.5
- EN 61000-4-5
3ctest CWS X00G/SPN 38XXT Combination Wave Surge Simulator CWS
In Stock- 5.7 inch color touch screen
- Surge voltage up to 6kV/4kV, surge current up to 3kA/4kA
- Surge voltage and current monitoring and LCD display
- Surge failure detection
- Test programmable function with easy operation
- External automatic three-phase five-wire CDN
- External magnetic field coil as per IEC61000-4-9 test
- Ethernet, RJ45 for PC remote control, print and documentation
Standard
- IEC 61000-4-5
- IEC 61000-4-9
- GB/T 17626.5
- EN 61000-4-5
- EN 61000-4-9
- UL1449
- ITU-T K.20
- ITU T K.45
- ITU-T K.12
3ctest CWS 60G Combination Wave Surge Simulator
In Stock- 5.7 inch color touch screen
- Surge failure detection
- Surge voltage up to 600V, surge current up to 300A
- Test programmable function with easy operation
- Surge voltage and current monitoring and LCD display
- Built-in single phase coupling/decoupling network
- Controlled external three-phase CDN
- Ethernet, RJ45 for PC remote control, print test report
Standard
- IEC 61000-4-5
- IEC 61000-4-9
- IEC 61850-3
- IEC 61326
- IEC 60255-22-5
- GB/T 17626.5
- EN 61000-4-5
- EN 61000-4-9
- EN 61326
- UL1449
- ITU-T K.20
- ITU-T K.12
- ITU-T K.45
3ctest SG 5020H Fully Automatic Multi-Function Lightning Surge
In Stock- Color touch screen 10inch LCD
- PLC control and fully automatic control system
- Multiple automatic fault judgment, sound and light alarm
- Double discharge switch and wide range of output, min. up to 500V
- RS232 communication interface for remote control
- Can be optional for MDO3012 oscilloscope to calculate waveform parameters automatically for measurement analysis system，
- Can be optional for single phase CDN
- 19 inch standard cabinet
3ctest SG 5030G Multi-functional Surge Test Bench
In Stock- LCD display and touch screen with easy to operate
- Programmable high voltage power supply with high stability and display the breakdown current and voltage
- With imported non-inductance high power resistance to ensure surge waveform consistency
- Automatically switching positive or negative polarity
- Freely set the surge injection phase angle 0-360°
- Internal current and voltage probe，BNC connection to oscilloscope to observe waveforms
- Optional for kinds of waveform module
- RS-232communication interface, for remote control, optional for measurement control system software
Standard
- IEC 61000-4-5
- IEC 61643-1
- IEC 61010
- IEC 60664
- GB/T 17626.5
- GB/T 16927.1
- ITU-T K.21
- ITU T K.44
- ITU T K.45
3ctest SG 5015H Fully Automatic Multi-Function Lightning Surge
In Stock- Color touch screen 10inch LCD
- PLC control and fully automatic control system
- Multiple automatic fault judgment, sound and light alarm
- Double discharge switch and wide range of output, min. up to 500V
- RS232 communication interface for remote control
- Can be optional for MDO3012 oscilloscope to calculate waveform parameters automatically for measurement analysis system，
- Can be optional for single phase CDN
- 19 inch standard cabinet
Standard
- IEC 61000-4-5
- GB/T 17626.5
- GB/T 16927.1
- ITU T K.44
- ITU-T K.21
3ctest SG-968G Automatic Lightening Surge Simulator
In Stock- Color touch screen 7 inch LCD
- Automatic control system
- Intelligent HV mains charging mode
- Four test waveforms in one, standalone test
- Contactless discharging switch, no discharging noise
- Internal automatic single phase CDN
- 22U Standard 19 inch mobile cabinet installation
- RS232 Communication port for remote control
Standard
- TIA-968B
- FCC part 68
Noiseken LSS-15AX Series Lightning Surge Simulator up to 15kV
Call for Lead Time- Fully programmable and easy to use simulator that meets and far exceeds the IEC 61000-4-5 (2nd edition) requirements
- 15kV surge lightning testing
- Advanced safety
- Flexible test sequencing with Program Mode
Teseq NSG 3150 Combination Wave Surge Generator for IEC/EN 61000-4-5 up to 15 kV
Inquire for Lead Time- Fully IEC 61000-4-5 compliant
- 1.2/50 µs pulse up to 15 kV / 7.5 kA
- 1000 VDC EUT supply available
- Large 7.2" color display and touch panel interface
- Standards and user test libraries
- Wide range of accessories
Rent Teseq (Schaffner) NSG 2050 High Energy Pulse Generator System
In Stock- Rentals are month to month
- PNW 2055 Combination Wave Module:
- Voltage: 1,2/50us
- Current: 8/20us
- Impulse voltage: 200V - 4.4kV
- Impedance: 2 Ohm & 12 Ohm
- Pulse Repetition: 10s to 1000s
- Built in coupling network, 20V to 230VAC, 16A sync or async to power line
