Viewed products
5.7 inch color touch screen Surge...
New
Standard
Warning: Last items in stock!
Availability date:
Lightning surge is a kind of transient high voltage or high current phenomenon produced by lightning and electronic switch on-off action, nearly all electronic electrical devices may suffer the surge influences. CWS 60 series combination wave surge simulator is designed to simulate surge pulses disturbance which can fully meet single phase immunity test requirements for CE ,CCC certification, also for three phase tests by external CDN.
General Data | |
Display screen | 5.7 inch TFT color touch screen |
Power supply | AC 110V/220V, ±10%, 50/60Hz (default AC 220V) |
Fuse | 6A |
Max. Power consumption | 200W |
Memory space | Infinite(PC) |
Communication mode | Ethernet, RJ45 |
Working indicator | LED, LCD front panel display |
Failure detection | Display on LCD and interrupt the work at failure case |
EUT power injection | 4mm2 banana plug wire |
Output mode | Standard 1m coaxial cable |
Size(W*H*D) | 19 inch/6U |
Weight | Approx.30Kg |
Temperature | 15–35℃ |
Humidity | 45%-75% |
Air pressure | 86kPa~106kPa |
As per IEC 61000-4-5 Surge Immunity Tests | |
Combination wave | |
Test voltage | 20V-600V ±10% |
Voltage waveform | Front time: 1.2μs±30% Time to half value: 50μs±20% |
Test current | 10A-300A±10% |
Current waveform | Front time: 8μs±20% Time to half value: 20μs±20% |
Source output impedance | 2 ohm |
Output polarity | +/-/alternative |
Pulse cycle | 6s-99s(shortest depends on test voltage) |
Number of test | 1–999 |
Trigger mode | Automatic, manual and external |