Antenna Test Turntables

Quick Links

Information

Viewed products

Maturo PAS 2.0-3-N...
Designed for measurements in...

Maturo PAS 2.0-3-N Pneumatic Antenna Stand

View larger

Display all pictures

Maturo PAS 2.0-3-N Pneumatic Antenna Stand

Condition New

Designed for measurements in electromagnetic absorption chambers
Fixed measuring height with 3 antennas at the same time to minimize time for test setup
Exception of the rotary actuators, is fabricated from plastic (PVC and reinforced fibreglass)
Polarisation occurs using compressed air

The EMC Shop

More details

Request Quote

Request Quote/More Info

Send to a friend
Send to a friend
Maturo PAS 2.0-3-N Pneumatic Antenna Stand
Designed for measurements in electromagnetic absorption chambers
Fixed measuring height with 3 antennas at the same time to minimize time for test setup
Exception of the rotary actuators, is fabricated from plastic (PVC and reinforced fibreglass)
Polarisation occurs using compressed air
Recipient :
Name of your friend ^* :
E-mail address of your friend ^* :
^* Required fields
or Cancel
Print

PDF Downloads

Data Sheet

PDF Downloads (210.79k)

Test Equipment Description

The unique Pneumatic Antenna Stand PAS 2.0-3-N is specifically designed for measurements in electromagnetic absorption chambers at a fixed measuring height with 3 antennas at the same time to minimize time for test setup.

The PAS 2.0-N-3, with the exception of the rotary actuators, is fabricated from plastic (PVC and reinforced fibreglass).

Polarisation occurs using compressed air. A solenoid valve located outside of the chamber regulates the compressed air flow. The antenna bar height is manually adjustable. Antenna Adapters for all commercially available antennas are available upon request. All antennas during polarisation rotate around their axis to eliminate any elevation errors.

The IEEE 488.2 (GPIB) bus provides an additional control option for all functions, when operated with the SCU/MCU Controller.

Technical Data
Antenna height adjustable manually	0.7 m to 2.0 m
Total mast height	2.2 m
Load capability	max. 10 kg
Depending on the distance of the antenna centre of gravity
Material	Plastic + reinforced fibreglass, weatherproof
Mast cross-section	0.06 m x 0.06 m
Base L x W	0.9 m x 0.6 m
Moveable with 4 casters
Polarisation of 3 antennas	0°/90° (vert./hor.)
Polarisation time 0°/90°	approx. 3 sec
Antennas are tilted by 10 degree to focus on the centre of the EUT
Polarisation drive	2 Pneumatic rotary actuators
Control	Solenoid valve
Pressure	max. 6 bar
Temperature range	-10 °C...+35 °C
Total weight	35 kg
Accessories	Interface to PC-/SCU or MCU
Controller	2x 15 m air hose Service manual