RF Power Amplifiers

Quick Links

Information

Viewed products

ENI 3200L 250 kHz to 150 MHz RF Power Amplifier 200W 55DB View larger

Monthly Rental E&I 3200L 250 kHz to 150 MHz RF Power Amplifier 200W 55DB

New

  • 250 KHz to 150 MHz
  • Instantaneous Bandwidth
  • 200 W 1dB Compression
  • Solid State
  • Air Cooled

More details

Request Quote/More Info

PDF Downloads

Data Sheet

ENI 3200L Power Amplifier

PDF Downloads (96.01k)

Specifications

Frequency range250 KHz to 150 MHz
Gain53 dB (nominal)
VSWR50Ω / 1.5:1 maximum
Dimensions13.1“ x 16.7“ x 20.5“ 333.2 mm x 424.4 mm x 520.1 mm
Output Impedance50Ω / 1.25:1 maximum
ProtectionInput: Unit will withstand input signal of +13 dBm without damage (1.0 V rms) max. and infinite load VSWR.
Weight80 lbs (36.3 Kg)
AC Input100 – 240 VAC 47-63 Hz. 25 A @ 120 V 12.5 A @ 240 V
Class of OperationClass A
CoolingForced air
Rated Power Output250 KHz – 150 MHz 200 Watts (P1dB)
Gain Flatness+/- 1.5 dB
Input Power for Rated Pout1 mW
Ruggednessoo:1 VSWR
Temperature Range0 – 40 C
Third Order Intercept PointIP3 ~ 62 dBm

Test Equipment Description

The E&I 3200L Amplifier is a rugged source of RF power, useful for RFI/EMI, HF and VHF transmitters, plasma equipment, nuclear accelerators and general laboratory applications. The 3200L represents E&I’s commitment to providing RF power amplifiers of the highest quality, durability and ruggedness.

FLEXIBILITY
The 3200L produces 200 Watts of class A linear power output over the entire frequency range from 250 KHz to 150 MHz. It has very low harmonic distortion along with low IMD products. Operation over the band is achieved without the need for any band switching or indeed any adjustments. The power gain is rated at 53 dB with a typical gain flatness of +/- 1.5 dB.

The 3200L is compatible with most signal generators, frequency synthesizers, sweep generators and other laboratory signal sources. It accurately reproduces all waveforms within its power and frequency ranges: AM. FM, SSB, pulsed and other complex modulation schemes.

RUGGEDNESS
The 3200L is built to withstand a 13 dBm input (1.0 Volt RMS) for any VSWR load condition. The internal switched mode power supply is very conservatively rated, in order to facilitate operation over a large range of line conditions and temperatures. The forced air cooling provides for low internal temperatures, providing long term reliability. The RF power is delivered by rugged DMoS FETs, de-rated to provide for excellent MTBF figures.

Associated EMC Test Equipment

30 other products in the same category: