> EMC Test Equipment>RF Power Amplifiers>DC - 300 kHz RF Amplifiers>Rent Amplifier Research 2000LM20, 1 - 200 MHz, 2 kW RF Power Amp

DC - 300 kHz RF Amplifiers

Quick Links

Information

Viewed products

Rent Amplifier Research 2000LM20, 1 - 200 MHz, 2 kW RF Power Amp View larger

Rent Amplifier Research 2000LM20, 1 - 200 MHz, 2 kW RF Power Amp

New

  • Rentals Ship in 1-2 Business Days
  • Fresh Output Curve Provided
  • Output:
    • 2000 Watts Continuous up to 170 MHz
    • 1000 Watts Continuous up to 220 MHz
    • Min Range: 100 Watts Nominal
  • Frequency Range: 1 - 220 MHz
  • AC Input: 3 Phase
  • Flatness: ~1.5 dB
  • Input for Rated Output: 1.0 milliwatt Max
  • Connectors:
    • RF In: BNC
    • RF Out: N(f)

More details

Typically in Stock

Request Quote

Request Quote/More Info

Specifications

Frequency Range10 kHz - 220 MHz instantaneously
RF ConnectorRF Input: Type BNC female RF Output, high range: Type C female RF Output, low range: Type N female Gating/Blanking: Type BNC female Remote Control: 25 pin female subminiature D
Standards MetMIL-STD-461 RS103, MIL-STD-464
GainHigh Range: 61 dB; Low Range: 47 dB
RF Input Voltage1.0 milliwatt maximum for rated output
Impedance50 ohms, VSWR 1.5:1 maximum
Input200/208 ± 5% VAC, 3 phase, 50/60 Hz 380/415 ± 5% VAC, 3 phase, 50/60 Hz
Output2000 Watts Continuous up to 170 MHz 1000 Watts Continuous up to 220 MHz
Flatness± 1.5 dB
Dimensions22.1" x 59" x 23"
Weight525 LBs

Test Equipment Description

The Amplifier Research 1000LM20, 10 kHz - 220 MHz, 1000 Watts, 208V/3PH Input is an economical, self-contained, air-cooled broadband amplifier designed for laboratory applications that require instantaneous bandwidth, high gain and high power output. Housed in a stylish contemporary enclosure, the Model 1000L is smaller than competitive units with similar power levels. All operating controls are functionally grouped on the front panel for simplicity of operation. These include modern, lighted push-button switches for the command functions, POWER, STANDBY, OPERATE and PULSE, a control for setting the output level of the amplifier, and a meter for monitoring critical operating voltages and currents. Remote control is provided through a rear panel mounted connector. Isolated TTL level remote control can be accomplished using our CP2001 interface. Isolated IEEE-488 compatible control can be provided with our CP3000. A highly versatile unit, the Model 1000L features rugged circuitry and a quick-acting, solid state crowbar circuit to protect the final amplifier tubes from damage due to internal arcing. An electronic circuit is provided to enable rapid gating or blanking of the amplifier

Associated EMC Test Equipment

23 other products in the same category: