RF Preamplifiers

Quick Links

Information

Viewed products

Com-Power PAM-103 1...
Broadband Frequency Range of 1 MHz -...

Com-Power PAM-103 1 MHz - 1000 MHz Preamplifier for EMI/EMC Measurements

View larger

Display all pictures

Com-Power PAM-103 1 MHz - 1000 MHz Preamplifier for EMI/EMC Measurements

Condition New

Broadband Frequency Range of 1 MHz - 1000 MHz
Low Noise Figure: less than 6 dB
High Gain: 33 dB
Low VSWR: 1.3:1 Max
Output Power: +4 dBm @ 1 dB compression
Flatness: ± 3 dB
Reverse Isolation: Greater than 30 dB
Impedance: 50 Ohms
Connector: N-type (f)

The EMC Shop

More details

Typically In Stock

Request Quote

Request Quote/More Info

Send to a friend
Send to a friend
Com-Power PAM-103 1 MHz - 1000 MHz Preamplifier for EMI/EMC Measurements
Broadband Frequency Range of 1 MHz - 1000 MHz
Low Noise Figure: less than 6 dB
High Gain: 33 dB
Low VSWR: 1.3:1 Max
Output Power: +4 dBm @ 1 dB compression
Flatness: ± 3 dB
Reverse Isolation: Greater than 30 dB
Impedance: 50 Ohms
Connector: N-type (f)
Recipient :
Name of your friend ^* :
E-mail address of your friend ^* :
^* Required fields
or Cancel
Print

Specifications

Frequency Range	1 MHz - 1000 MHz
Gain	33 dB typical (± 3 dB flatness)
Application/Test Type	Increases system sensitivity enhancing the capability of measurement system to measure low level signals for EMI / EMC Measurements
Input	12 VDC, 0.7 A NimH (2 x 6 V NimH Battery packs)
Maximum Continuous Power	+4 dBm @ 1 dB compression
Connector	50Ω N-Type (f)
Dimensions	7.5 x 5 x 3 inches
VSWR	1.3:1
Weight	3.3 lbs. (1.5 kg)

Test Equipment Description

The Com-Power PAM-103 Preamplifier for EMI/EMC Measurements is intended for improving measurement system sensitivity during EMC compliance testing. It has a frequency range of 1 to 1000 MHz.. It has gain of 33 dB gain . Therefore, It amplifies the signals that were previously hidden below the noise floor of the EMI receiver so that it can be seen and measured. The PAM-103 has a gain variation of ±3 dB for the entire frequency range to reduce measurement errors. It can be powered by the rechargeable NimH batteries included when an external power source is not available.