> Application/Test Type>Conducted Emissions>Preamplifiers>Com-Power PAL-010 High Gain Preamplifier 100 Hz - 30 MHz

Preamplifiers

Quick Links

Information

Viewed products

Com-Power PAL-010 Preamplifier 100 Hz - 30 MHz View larger

Com-Power PAL-010 High Gain Preamplifier 100 Hz - 30 MHz

New

  • Broadband - 100 Hz - 30 MHz
  • High Gain: 28 dB
  • Flat Response: ± 2 dB
  • Individual Calibration

More details

Typically In Stock

Request Quote

Request Quote/More Info

Specifications

Frequency Range100 Hz - 30 MHz
Gain 28 dB
Application/Test TypeIncreases system sensitivity enhancing the capability of measurement system to measure low level signals for EMI / EMC Measurements
InputMax. DC Input 10 VDC, 2 dBm Input Power 12 VDC, 500 mA
Impedance50 Ohms
ConnectorBNC (f)
Dimensions7.5 x 5 x 3 Inch (9 x 13 x 7.6 cm)
BatteryBattery Pack: Two 6 V, 0.7 A NimH
Flatness(+/-) 2 dB
Weight 3.3 lbs. (1.5 kg)

Test Equipment Description

Com-Power model PAL-010 Preamplifier is intended for improving measurement system sensitivity during EMC compliance testing. It has a frequency range of 100 Hz to 30 MHz.. It has gain of 28 dB gain . Therefore, It amplifies the signals that were previously hidden below the receiver noise floor of the EMI receiver so that it can be seen and measured. The PAL-010 has a gain variation of ±2.5 dB for the entire frequency range to reduce measurement errors. It can be powered by the rechargeable NimH batteries included when an external power source is not available.

Com-Power PAM-103 Features:

  • Frequency: 100 Hz - 30 MHz
  • Application: EMI / EMC Measurements
  • Gain: 28 dB
  • Gain Flatness: ± 2.5 dB
  • Impedance I/O: 50 Ohms
  • Connector Type: BNC (f)
  • Power: 15 VDC, 500 mA
  • Battery Pack: 2 x 6 V NimH Battery packs
  • Size: (L x W x H) 7.5" x 5" x 3" (9 x13 x 7.6 cm)
  • Weight: 3.3 lbs. (1.5 kg)

Associated EMC Test Equipment

19 other products in the same category: