> EMC Test Equipment>RF Field Strength Probes & Meters

RF Field Strength Probes & Meters

Quick Links

Information

RF Field Strength Probes & Meters

Field strength probes and meters are essential when performing RFI (radio frequency immunity) testing. Mathematical equations factoring in gain, VSWR and cable loss typically do not match when performing actual testing. RF field strength probes and meters are available to monitor a broadband RF range or frequency specific areas.

Get Application Support, Pricing, Lead Time and More: Contact Form

RF Field Strength Probes & Meters There are 82 products.

Subcategories

  • Magnetic H-Field Probes

    These isotropic magnetic H-field probes can be used for monitoring field strengths while performing magnetic immunity tests per IEC 61000-4-8, IEC 61000-4-9 or IEC 61000-4-10 or can be used in the field to evaluate exposure.

    Rent, buy or lease magnetic field meters and probes for evaluation at very low frequencies. Magnetic H-field probes are also used to calibration magnetic field generators used in compliance testing. See Near Field Probes for componenet and subassembly debugging.

  • Electric E-Field Probes up to 6 GHz

    Rent, buy or lease Electric E-Field Probes up to 6 GHz. The EMC Shop specializes in monitoring field strength levels during RF immunity testing.

    Electric E-Field Probes up to 6 GHz

  • Electric E-Field Probes up to 18 GHz

    Rent, buy or lease Electric E-Field Probes up to 18 GHz. The EMC Shop specializes in monitoring field strength levels during RF immunity testing. Electric E-Field Probes up to 6 GHz

  • Electric E-Field Probes up to 40 GHz

     

    EMC/EMI Testing Services           Radiated Immunity & Susceptibility             Antenna Testing             Emissions Testing

     

    E-Field probes up to 40 GHz are used to monitor the electric field of signals in a uniform radiated field, or out in the real world. The EMC Shop utilizes electric e-field probes for whatever application, and utilize the software for reporting and system integration.

     

    The EMC Shop has a unique assortment of electric e-field probes up to 40 GHz in stock, offering economic or non-bias options as well as setup support. Rent, buy or lease electric e-field probes from Amplifier Research, Schwarzbeck, ETS-Lindgren, EMC Test Design, Lumiloop, Narda, PMM adn Rohde & Schwarz.

     

    Get Application Support, Pricing, Lead Time and More: Contact Form

     

per page
Showing 49 - 60 of 82 items
  • Quick view
    • 10 kHz - 9.25 GHz  Frequency Range
    • Up to 60 dB dynamic, single range
    • 0.5 to 500 V/m (1,000 V/m Overload)
    • Symmetrical dipole configuration
    • Excellent isotropy (down to 0.4 dB typical)
    • Up to 40 meters communication by Fiber Optic Cable
    • Up to 80 hours of operation before recharging
    • High performance, high reliability Li-Mn battery
    • PC direct connection via Optical to RS232/USB adapters
    Request Quote
    Typically Stocked
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 5 kHz - 60 GHz Frequency Response
    • Broadband Electric and Magnetic Field Monitor
    • Inputs from up to four isotropic field probes
    • Analyzes and displays that information on a user configurable color LCD display
    •  It provides three Digital Interfaces (IEEE-488, RS-232, and USB)
    • Compatible with all AR Worldwide 7000 Series E field or H Field Probes
    • For Use in Radio Frequency Interference / Electromagnetic Compatibility (RFI / EMC) Test System Applications
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Laser Powered for Unlimited Test Time 
    • Frequency Range: 10 MHz to 40 GHz 
    • Dynamic Range: 2.0 to 800 V/m (Single Range) 
    • Provides Individual and Summed Axis Values 
    • A2LA Accredited Calibration Report
    • Suitable for IEC 61000-4-3, GMW3097, SAE J113, MIL-STD-461 RS103 and more.
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 300 kHz to 26.5 GHz
    • Up to 66 dB dynamic, single range
    • 0.4 to 800 V/m (1,600 V/m Overload)
    • Symmetrical dipole configuration
    • Excellent isotropy (down to 0.4 dB typical)
    • Up to 80 hours of operation before recharging
    • High performance, high reliability Li-Mn battery
    • PC direct connection via Optical to RS232/USB adapters
    • Weighs less than an ounce
    Request Quote
    Typically Stocked
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 9 kHz - 300 MHz Frequency Range (nominal)
    • 9 kHz - 500 MHz Frequency Range (useable)
    • Passive, single-axis Efield probe
    • Suited for non-ionizing radiation measurements according to BGV-B11, ICNIRP, IEEE C95.1, FCC 96-236 and others
    • Allows a fast an accurate safety-evaluation of the measurement environment
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Used to satisfy the MIL STD 188-125
    • Requirement for E1 short-pulse direct current injection up to 5 kA
    • May be used with an MOV coupler or a direct injection output coupler
    • Operated using high-voltage power
    • Control rack
    • Includes a calibration fixture which uses a current transformer
    • With NIST traceable components
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Test System
    • Designed to meet the E2 or intermediate pulse specifications
    • For direct injection testing according to the MIl-STD 188-125 HEMP facility test system
    • Portable and battery operated;
    • For use on remote or mobile platform test subjects
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • DC–40GHz 
    • M1
    • Broadband EM Field Meter
    • Provides measurement capability
    • Housed within a durable metal shell 
    • With an integrated temperature sensor and GPS unit
    • Provides X, Y, Z analog output and;
    • Has a battery-life of more than 70 hours
    • 1 Year Warranty
    Request Quote
    Typically Stocked
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Rent Narda NBM-520 Kit
    • New - Old Stock
    • Intelligent probe interface detects probe parameters
    • Fully automatic zero point adjustment
    • Memory for saving up to 5,000 measurement results
    • PC software for convenient data management
    • Voice recording for comments
    • Conditional logging: Measured value saved when a threshold value is exceeded
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Smart Fieldmeter® Digital RFP-05M
    • Probe PI-03, Electric: 3 MHz – 18 GHz. 0.8 – 800 V/m
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Isotropic "E" Field Probe
    • 100 MHz - 60 GHz
    • 0.7 - 300 V/m
    • FP7060 probe
    • 10 meter glass cable
    • international battery charger
    • carrying case
    Request Quote
    Call for Availability
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Electric Field and Magnetic Flux Density Analysis from 5 Hz to 100 kHz
    • Isotropic Measurements with a Dynamic Range of 140 dB
    • Small Size and Optical Fiber Connection for Accurate, Repeatable Measurements
    • Built-in FFT Spectrum Analysis
    • Three (Narrowband, Broadband and Marker) Detection Modes
    • Internal Memory for Stand Alone Measurements
    • Interfaces to PC and Pocket PC
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
Showing 49 - 60 of 82 items