RF Field Strength Probes & Meters

Viewed products

View larger

EMC Test Design Kit, Digital RFP-05M Field Monitor, PI-03 Probe, 3 MHz - 18 GHz, 0.8 - 800 V/m

Condition New

The EMC Shop

Typically In Stock

Frequency Range	3 MHz - 18 GHz
Application/Test Type	EMC testing for CE, MIL and industrial EMC qualification. RF field strength monitoring for health, safety and industrial or military environmental control
RF Field Probes E-Field
Parameter	Value
Sensors	Isotropic 3-axis probe with advanced design meter measuring the RF field strength.
Measurement Mode	Average, Peak, and Pulse. Multi-probe unit with built-in recording capabilities.
Operation Time	8 hours
Flatness	+/- 0.5 dB (1-400 V/m), +/- 1 dB (400-600 V/m)
Dynamic Range	0.2 V/m-800 V/m
Internal Data Memory	built-in recording capabilities
Communication	Remote output monitoring is used for data analysis, storage and fast response close loop control.
PC Software	removable flash memory card
Temperature Reading Resolution	0.05 dB/°C (field more than 2 V/m)
Resolution	0.2 V/m
Dimensions	9 in x 2.25 in
Weight	0.2lbs.

Electromagnetic field monitor

Safety and regulatory assessment of AM/FM/TV and GSM cellular transmitters.
Safety and Regulatory assessment of microwave ovens and RF heating equipment.
Monitoring of the RF radiation from industrial, scientific and medical equipment.
Monitoring of RF fields from GTEM cells and antennas for EMC testing of consumer, industrial, automotive and military products.
Data logging of RF fields during Electrosmog testing and environmental monitoring in stand alone and remotely controlled testing sites.
Personal RF field monitoring and protection.

Benefits:

Fiber optic and USB RF isolated bidirectional control and battery charging without any additional wires coming out of the meter.
Graphical display to plot the data real time.
Operates with and stores the data of multiple probes, both current and future models.
Internal data logging with removable flash memory card offers programmable and practically unlimited data storage.

Isotropic Broadband Electric Field Probe
Diode based: 3-Axial isotropic sensor.
Sensitivity: 0.8 V/m.
Linearity: +/- 0.5 dB (1-400 V/m), +/- 1 dB (400-800 V/m).
Dynamic range: >60 dB (single range).
Frequency response (without correction factors):
+/- 1.5 dB (10 MHz–6 GHz), -3 dB @ 3 MHz, +/- 3 dB (6 GHz–12 GHz).
Frequency response (with correction factors): +/- 1.0 dB (10 MHz–12 GHz), +/- 3 dB (12 GHz–18 GHz).
Rotational isotropicity: +/- 0.5 dB (3 MHz-6 GHz), +/- 2 dB (6 GHz –18 GHz).
Calibration accuracy (at specified freq.) <1 dB.
Temperature: 5-40 °C,
Humidity: RH 10-90%, non-condensing.
Temperature error: <0.05 dB/°C (field > 2 V/m).
UK NPL or NIST traceable calibration.
Small size: LxD: 9.0x2.25 inch, 230x58 mm.
Weight: 0.2 lb, 100 g.
Operates with both RFP-04 and RFP-05 meters.