RF Field Strength Probes & Meters

Quick Links

Information

Viewed products

Narda PMM EP-604 300...
300 kHz to 26.5 GHz Up to 66 dB...

Narda PMM EP-604 E-field Probe 800 V/m CW to 26.5 GHz

View larger

Display all pictures

Narda PMM EP-604 300 kHz – 26.5 GHz Broadband Active Electric Field Probe

Condition New

300 kHz to 26.5 GHz
Up to 66 dB dynamic, single range
0.4 to 800 V/m (1,600 V/m Overload)
Symmetrical dipole configuration
Excellent isotropy (down to 0.4 dB typical)
Up to 80 hours of operation before recharging
High performance, high reliability Li-Mn battery
PC direct connection via Optical to RS232/USB adapters
Weighs less than an ounce

The EMC Shop

More details

Typically Stocked

Request Quote

Request Quote/More Info

Send to a friend
Send to a friend
Narda PMM EP-604 300 kHz – 26.5 GHz Broadband Active Electric Field Probe
300 kHz to 26.5 GHz
Up to 66 dB dynamic, single range
0.4 to 800 V/m (1,600 V/m Overload)
Symmetrical dipole configuration
Excellent isotropy (down to 0.4 dB typical)
Up to 80 hours of operation before recharging
High performance, high reliability Li-Mn battery
PC direct connection via Optical to RS232/USB adapters
Weighs less than an ounce
Recipient :
Name of your friend ^* :
E-mail address of your friend ^* :
^* Required fields
or Cancel
Print

Specifications

Frequency Range	300 kHz to 26.5 GHz
Standards Met	IEC/EN 61000-4-3
Application/Test Type	Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF rooms for radiated immunity testing.
RF Field Probes E-Field
Parameter	Value
Sensors	Six monopoles
Measurement Mode	X-Y-Z axis simultaneous sampling
Sampling Rate	22 to 0.03 Samples/s depending on filter settings
Digital Filtering	Low-pass 2.3 to 28 Hz; 80 dB notch 50/60 Hz
Battery	3V, 5 mA/h, Li-Mn rechargeable
Operation Time	80 hours @ 0.4 S/s, 28 Hz filter; 60 hours @ 5 S/s, 28Hz filter
Recharging Time	48 hours for full operation time Partial charging allowed (8 hrs recharging allows 12 hrs operation @ 5 S/s 1 hr recharging allows 5 hrs operation @ 0.4 S/s
Flatness	Frequency correction OFF: 10 to 18000 MHz: 1.8 dB; 3 to 23000 MHz: 3.2 dB; Frequency correction ON: typically 0.3 to 26500 MHz: 0.4 dB
Dynamic Range	0.4 to 800 V/m; 66 dB single range
Overload	1,600 V/m
Internal Data Memory	Serial nr. - Calibration factors & date Firmware version
Communication	Bidirectional fiber optic link
PC Software	Displays field, temperature, battery Sampling, filters, averaging, frequency setting Manual data logging as text file
Probe Holder Tip	1/4 20 UNC female
Battery Voltage Reading Resolution	10 mV
Temperature Reading Resolution	0.1 °C
Resolution	0.01 V/m
Dimensions	45mm (1.7 inches)
Weight	22 grams (0.77 ounces)

Test Equipment Description

The all-in-one that sets the standard for miniature optically coupled broadband E-field isotropic probes. Exceptionally small-sized spherical symmetrical configuration, lightweight and miniaturized electronics combined with excellent RF characteristics make the Narda PMM EP-604 E-field Probe 800 V/m CW to 26.5 GHz is the ideal solution for all EMC/EMI applications (chambers and TEM/GTEM cells), biology and materials research and wherever fast and accurate measurements with negligible or minimum interference of the probe to the field under measure are essential. Accredited calibration on request.