> EMC Test Equipment>Coupling Decoupling Networks (CDN's)>RF Power Line CDN's
RF Power Line CDN's

The EMC Shop stocks power line coupling decoupling networks for RF conducted immunity testing. The distubance signals are coupled to each conductor in the supply lines according to EN IEC 61000-4-6 standard. The standard M series CDNs have a current rating of 25 Amps. CDNs are available for power supplies from 1 to 5 conductors.

Get Application Support, Pricing, Lead Time and More: Contact Form

RF Power Line CDN's

  • M1 for one line
  • M2 for two lines
  • M2/3 switchable for two or three lines
  • M3 for three lines
  • M4 for lines and
  • M5 for five lines "-10 types" for frequency range 10 kHz to 80 MHz
  • "-3L and -3LN types" for connections without PE "-750V, -760V
  • -1000V types" for higher EUT voltages

RF Power Line CDN's There are 34 products.

Subcategories

  • 1 Line CDN

    1-line CDN's for 1 PE line power compliance testing in accordance to IEC 61000-4-6 and other standards. The M1 power line CDN is used to couple common mode CW and modulated signals onto single power line systems. The M1 can be ideal for automotive systems using the chassis as the DC return

    The EMC Shop carries an assortment of M-type 1 line coupling/decoupling networks with different current ratings and connector types.

    Get Application Support, Pricing, Lead Time and More: Contact Form

  • 2 Line CDN

    2-line CDN's for L+N, DC +, DC- power compliance testing in accordance to IEC 61000-4-6 and other standards.

    The M2 is commonly used for 2 wire power conductor cables.

    The EMC Shop carries an assortment of M-type 2 line coupling/decoupling networks with different current ratings and connector types.

    Get Application Support, Pricing, Lead Time and More: Contact Form

  • 3 Line CDN

    3-line CDN's for L+N+PE, 2L+PE, or 3L power compliance testing in accordance to IEC 61000-4-6 and other standards.

    M3 is used for two line single phase cables.

    The EMC Shop carries an assortment of M-type 3 line coupling/decoupling networks with different current ratings and connector types.

    Get Application Support, Pricing, Lead Time and More: Contact Form

  • 4 Line CDN

    4-line CDN's for 2L+N+PE, 3L+PE, 3L+N, 3L+N+PE power compliance testing in accordance to IEC 61000-4-6 and other standards.

    The M4 is used on three phase power mains with P.E.

    The EMC Shop carries an assortment of M-type 4 line coupling/decoupling networks with different current ratings and connector types.

    Get Application Support, Pricing, Lead Time and More: Contact Form

  • 5 Line CDN

    5-line CDN's for 3L+N+PE power compliance testing in accordance to IEC 61000-4-6 and other standards.

    M5 is used on three phase systems with neutral and protected earth ground conductors.

    The EMC Shop carries an assortment of M-type 5 line coupling/decoupling networks with different current ratings and connector types.

    Get Application Support, Pricing, Lead Time and More: Contact Form

per page
Showing 25 - 34 of 34 items
  • Quick view
    Request Quote
    Inquire for Qty In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Designed for IEC/EN 61000-4-6 Conducted RF Immunity Testing
    • 150 kHz-230MHz Frequency Range
    • Coupling/Decoupling Network (CDN) CDN M Type
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    $790.00
    • Coupling/Decoupling Network (CDN) CDN M Type
    • Designed for IEC/EN 61000-4-6
    • Types with 4 mm banana sockets
    • Performance 10 KHz to 80 MHz for PE Lines
    • Current: 200 mA (25 Amp for 1 seconf PE line Test)
    • Common Mode Impedance: 150 Ohms
    • Insertion loss: less than 0.1 dB
    $790.00
    Add to cart
    Typical Lead Time: 4 - 6 Weeks
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Frequency range 150 kHz - 230 MHz (Optional 10 kHz - 80 MHz)
    • 433 Volts AC (Optional 1,000 Volts)
    • Designed for IEC/EN 61000-4-6
    • Conforms with CISPR 16-1-2
    • Enables testing to CISPR 16-2-1 and CISPR 15 CDN method
    • Excellent performance
    • Calibration kit available
    • 4 mm banana sockets
    • CDN for M2 application
    Request Quote
    Typical Lead Time 4 - 6 Weeks
    Request Quote/More Info
    Add to Compare
  • Quick view
    $1,020.00 NIST Traceable
    • Coupling/Decoupling Network (CDN) CDN M Type
    • Designed for IEC/EN 61000-4-6
    • CDN M016 switchable M2 or M3
    • Types with 4 mm banana sockets
    • Performance up to 230 MHz
    $1,020.00
    Add to cart
    Typical Lead Time: 4 - 6 Weeks
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 3 power lines, (L+N+PE), (2L+PE), Optional L+L+L
    • Frequency range 150 kHz - 230 MHz (Optional 10 kHz - 80 MHz)
    • 433 Volts AC
    • Designed for IEC/EN 61000-4-6
    • Conforms with CISPR 16-1-2
    • Enables testing to CISPR 16-2-1 and CISPR 15 CDN method
    • Excellent performance
    • Calibration kit available
    • 4 mm banana sockets
    • CDN for M3 application
    Request Quote
    Typical Lead time: 4 - 6 Weeks
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Coupling networks designed for IEC/EN 61000-4-6
    • M2 series for mains applications
    • Models with 4 mm banana sockets
    • Models with frequency range 10 kHz to 80 MHz, 150 kHz to 230 MHz or up to 300 MHz
    • Very efficient coupling also for 100 Amps CDNs
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 5 power lines, (3L+N+PE)
    • Frequency range: 150 kHz to 230 MHz (Optional 10 kHz - 80 MHz)
    • Designed for IEC/EN 61000-4-6
    • M4 application without PE
    • 4 mm banana sockets
    • Power Rating: 250VAC/400VDC line to ground
    Request Quote
    Typical Lead time: 4 - 6 Weeks
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 4 power lines, (2L+N+PE), (3L+PE), optional (3L+N)
    • Frequency range: 150 kHz to 80 MHz
    • Designed for IEC/EN 61000-4-6
    • M4 application without PE
    • 4 mm banana sockets
    • Power Rating: 250VAC/400VDC line to ground
    Request Quote
    Typical Lead time: 4 - 6 Weeks
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 4 power lines, (2L+N+PE), (3L+PE), optional (3L+N)
    • Frequency range: 150 kHz to 230 MHz (Optional 10 kHz - 80 MHz)
    • Designed for IEC/EN 61000-4-6
    • M4 application without PE
    • 4 mm banana sockets
    • Power Rating: 250VAC/400VDC line to ground
    Request Quote
    Typical Lead time: 4 - 6 Weeks
    Request Quote/More Info
    Add to Compare
Showing 25 - 34 of 34 items