RF Power Line CDN's

Quick Links

Information

Viewed products

Teseq CDN M432 32 Amp...
4 power lines, (2L+N+PE), (3L+PE),...

Teseq CDN M432 32 Amp Coupling/Decoupling Network - The EMC Shop

View larger

Teseq CDN M432 32 Amp Coupling/Dcoupling Network

Condition New

4 power lines, (2L+N+PE), (3L+PE), optional (3L+N)
Frequency range: 150 kHz to 230 MHz (Optional 10 kHz - 80 MHz)
Designed for IEC/EN 61000-4-6
M4 application without PE
4 mm banana sockets
Power Rating: 250VAC/400VDC line to ground

The EMC Shop

More details

Typical Lead time: 4 - 6 Weeks

Request Quote

Request Quote/More Info

Send to a friend
Send to a friend
Teseq CDN M432 32 Amp Coupling/Dcoupling Network
4 power lines, (2L+N+PE), (3L+PE), optional (3L+N)
Frequency range: 150 kHz to 230 MHz (Optional 10 kHz - 80 MHz)
Designed for IEC/EN 61000-4-6
M4 application without PE
4 mm banana sockets
Power Rating: 250VAC/400VDC line to ground
Recipient :
Name of your friend ^* :
E-mail address of your friend ^* :
^* Required fields
or Cancel
Print

Specifications

Voltage Rating	AC max. voltage (line to ground) / (line to line): 250 V / 433 V (CDN M216-1000V: 500 V / 1000 V);DC max. voltage (line to ground) / (line to line): 400 V / 800 V (CDN M216-1000V: 1000 V / 2000 V);Test voltage: 3 kV DC, 2 sec
Frequency Range	150 kHz to 230 MHz (Optional 10 kHz - 80 MHz)
Standards Met	IEC 61000-4-6
RF Connector	BNC, 50 Ω
Mains & EUT Connections	4 mm, safety (Optional IEC 320 16A)
Common Mode Impedance	150 kHz to 26 MHz: 150 Ω ±20 Ω;26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω
Current Rating	32 Amps Maximum
Application/Test Type	4 mains AC power lines emissions testing up to 32 Amps (2L+N+PE), (3L+PE), optional (3L+N)
Insertion Loss	Greater than 0.1 dB
RF Input Voltage	Less than 30 V
Decoupling of Common Mode Disturbance	Greater than 30 dB
Voltage Division Factor	10 dB +3 dB / -1 dB
Dimensions	6.3 x 6.3 x 20 inches (16.0 cm x 16.0 cm x 50.0 cm)
Weight	6.5 kg (14.3 LB.'s)

Test Equipment Description

IEC/EN 61000-4-6 specifies the design and performance of a range of coupling/decoupling networks (CDNs). Each CDN is specific to the type of cable and the intended signal carried on the cable. Teseq offers an extensive range of CDNs which fully comply with the requirements of the standard and provide a simple and reliable method of injecting RF energy into the equipment under test (EUT).