RF Power Line CDN's

Quick Links

Information

Viewed products

Teseq CDN M1-10...
Coupling/Decoupling Network (CDN) CDN...
Teseq LNA 6900 Low...
Frequency range: 9 kHz to 2 GHz...

Teseq CDN M1-10 Coupling Network 10 KHz to 80 MHz for PE Lines - EMC Test Equipment

View larger

Display all pictures

Teseq CDN M1-10 Coupling Network 10 KHz to 80 MHz for PE Lines

Condition New

Coupling/Decoupling Network (CDN) CDN M Type
Designed for IEC/EN 61000-4-6
Types with 4 mm banana sockets
Performance 10 KHz to 80 MHz for PE Lines
Current: 200 mA (25 Amp for 1 seconf PE line Test)
Common Mode Impedance: 150 Ohms
Insertion loss: less than 0.1 dB

The EMC Shop

More details

Typical Lead Time: 4 - 6 Weeks

$790.00 + Shipping

Request Quote/More Info

Send to a friend
Send to a friend
Teseq CDN M1-10 Coupling Network 10 KHz to 80 MHz for PE Lines
Coupling/Decoupling Network (CDN) CDN M Type
Designed for IEC/EN 61000-4-6
Types with 4 mm banana sockets
Performance 10 KHz to 80 MHz for PE Lines
Current: 200 mA (25 Amp for 1 seconf PE line Test)
Common Mode Impedance: 150 Ohms
Insertion loss: less than 0.1 dB
Recipient :
Name of your friend ^* :
E-mail address of your friend ^* :
^* Required fields
or Cancel
Print

Specifications

Voltage Rating	3 kV DC, 2 sec
Frequency Range	150 kHz to 230 MHz
Standards Met	IEC/EN 61000-4-6
RF Connector	BNC 50 Ω
Common Mode Impedance	10 kHz to 26 MHz: 150 Ω ±20 Ω;26 MHz to 80 MHz: 150 Ω +60 Ω / -45 Ω
Current Rating	Current max. (no saturation): 300 mA;Current max. (1 s for PE line test): 25 A
Application/Test Type	switchable 2 or 3 power lines, (L+N or L+N+PE)
Insertion Loss	Less than 0.1 dB
RF Input Voltage	Less than 20 Volts
Voltage Division Factor	10 dB ±1 dB
Dimensions	3.9" x 3.9" x 9.5" (100 mm x 100 mm x 240 mm)
Weight	3.3 Lbs (1.5 kg)

Test Equipment Description

IEC/EN 61000-4-6 specifies the design and performance of a range of coupling/decoupling networks (CDNs). Each CDN is specific to the type of cable and the intended signal carried on the cable. Teseq offers an extensive range of CDNs which fully comply with the requirements of the standard and provide a simple and reliable method of injecting RF energy into the equipment under test (EUT).

Whilst the published standard only specifies the performance of CDN from 150 kHz to 80 MHz, most of Teseq CDNs are specially designed to give the same performance to a wider frequency range. This is required by some product specific standards. Each CDN is also useable for emission testing. Special types meet the requirements of CISPR 15 or can be used as impedance stabilization network (ISN) defined in CISPR 22.