RF Power Line CDN's

Quick Links

Information

Viewed products

Teseq CDN M210B...
Coupling/Decoupling Network (CDN) CDN...

View larger

Teseq CDN M210B Coupling Network with CEE 7/17 EUT Port & IEC 60320 C14 AE Port

Condition New

Coupling/Decoupling Network (CDN) CDN M Type
Designed for IEC/EN 61000-4-6
CDN M016 switchable M2 or M3
Types with 4 mm banana sockets
Performance up to 230 MHz

The EMC Shop

More details

Typical Lead Time: 4 - 6 Weeks

$1,020.00 + Shipping

Calibration

Request Quote/More Info

Send to a friend
Send to a friend
Teseq CDN M210B Coupling Network with CEE 7/17 EUT Port & IEC 60320 C14 AE Port
Coupling/Decoupling Network (CDN) CDN M Type
Designed for IEC/EN 61000-4-6
CDN M016 switchable M2 or M3
Types with 4 mm banana sockets
Performance up to 230 MHz
Recipient :
Name of your friend ^* :
E-mail address of your friend ^* :
^* Required fields
or Cancel
Print

Specifications

Voltage Rating	AC max. voltage (line to ground): 250 V DC max. voltage (line to ground): 400 V; 3 kV DC, 2 sec
Frequency Range	150 kHz to 230 MHz
Standards Met	IEC/EN 61000-4-6
RF Connector	BNC 50 Ω
Mains & EUT Connections	AE Euro: IEC 60320 C14 EUT-socket 2lines: CEE 7/17;
Common Mode Impedance	150 kHz to 26 MHz: 150 Ω ±20 Ω 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω
Current Rating	10 Amps
Application/Test Type	switchable 2 or 3 power lines, (L+N or L+N+PE)
Insertion Loss	Less than 0.1 dB
RF Input Voltage	30 Volts Max
Decoupling of Common Mode Disturbance	150 kHz: Greater than 30 dB1.5 MHz: Greater than 60 dB30 MHz: Greater than 40 dB230 MHz: Greater than 20 dB
Voltage Division Factor	150 kHz to 80 MHz: 9.5 dB ±1 dB80 MHz to 230 MHz: 9.5 dB +3 dB / -2 dB
Dimensions	3.9" x 3.9" x 9.5" (100 mm x 100 mm x 240 mm)
Weight	3.3 Lbs (1.5 kg)

Test Equipment Description

IEC/EN 61000-4-6 specifies the design and performance of a range of coupling/decoupling networks (CDNs). Each CDN is specific to the type of cable and the intended signal carried on the cable. Teseq offers an extensive range of CDNs which fully comply with the requirements of the standard and provide a simple and reliable method of injecting RF energy into the equipment under test (EUT).

Whilst the published standard only specifies the performance of CDN from 150 kHz to 80 MHz, most of Teseq CDNs are specially designed to give the same performance to a wider frequency range. This is required by some product specific standards. Each CDN is also useable for emission testing. Special types meet the requirements of CISPR 15 or can be used as impedance stabilization network (ISN) defined in CISPR 22.