> Manufacturers>3ctest>3ctest Automotive Transient Generators>3ctest APS 60C20.1 DC 60V 20A Max, 40A Continuous 500ms

3ctest Automotive Transient Generators

Quick Links

Information

Viewed products

3ctest APSxx Series Voltage Drop Simulator Battery Supply Simulator and DC Voltage Source View larger

3ctest APS 60C20.1 DC 60V 20A Max, 40A Continuous 500ms

New

  • Test voltage up to 60V
  • Test current up to 30A
  • 5.7 inch color touch screen
  • Low output impedance
  • High impulse current capacity
  • Powerful DC voltage source
  • Quick response, the bandwidth up to 300 kHz
  • Pulses 4 and 2b as per ISO 7637-2:2004
  • Voltage variation test as per ISO 16750-2:2006
  • To simulate various supply waveforms, e.g. superimposed nose
  • Ethernet, RJ45, PC control, and test report documentation and print
  • Pre-programmed test routines to simulate various supply waveforms
  • Automatic voltage compensation with external control of simulated input waveform

Application Areas

  • Automotive 
  • Avionics
  • Communication
  • Military

More details

Request Quote

Request Quote/More Info

PDF Downloads

3ctest APS Series Data Sheet

PDF Downloads (704.41k)

Test Equipment Description

Voltage Drop Simulator Battery Supply Simulator and DC Voltage Source

The 3ctest APS Series can be used as battery supply simulation and DC voltage source. During test in test lab, APS series can replace vehicle battery. Pulse 2b, Pulse 4, sine wave noise and other complicated voltage variation test can be conducted by APS series simulator as per ISO 7637/16750.

It can simulate multiple battery supply waveforms as per international standards and multiple automotive manufacture standards. Also, as a powerful DC source, it can supply power for DUT during automotive transient pulse test, which can meet 42V, 24V and12V supply voltage. APS series can also be used as power amplifier for magnetic field immunity test.

Specifications
Output voltageSingle polarity output: 0~60V
Voltage resolution±0.2V
Output current0A ~ 30A
Analog signal inputBNC
Sense signal inputBNC
Source impedance＜10mΩ
Voltage compensation resolution±0.1V
Max. compensated voltage4V
Voltage deviation＜1V (resistive load, including impulse current), recover to 63% of max. amplitude during 100us
Voltage fluctuationUr＜0.2V P-P, min. frequency: 400Hz
Rise time＜10us(resistive load)
Sine signal outputFrequency up to 300kHz （as per Vpp and output current of waveform）
External signal input0 ~ 10V
outputDUT supply: high current connector
Serial portLAN Ethernet RJ45
enlarging scale of external signal1:10
Supply voltageAC 220V，±10%，45-65Hz (Or AC110V can choose)
Temperature15 ~ 35 °C
Humidity45%--75%RH (no condensation)
APS Series Models
Simulator and power amplifierHigh resolution programmable DC sourceparameterssize
1. Supply voltage of 40V
APS 40C05internalDC 40V 5A max, 15A continuous 500ms19’’/4U
APS 40C10internalDC 40V 10A max, 15A continuous 500ms19’’/4U
APS 40C15internalDC 40V 15Amax; 15A long time19’’/4U
APS 40C20DCP 40C20DC 40V 20A max, 30A continuous 500ms19’’/8U
APS 40C30DCP 40C30DC 40V 30A max, 33A continuous 500ms19’’/8U
APS 40C30.1DCP 40C30.1DC 40V 30A max, 60A continuous 500ms19’’/8U
2. Supply voltage of 60V
APS 60C10DCP 60C10DC 60V 10A max, 20A continuous 500ms19’’/8U
APS 60C20DCP 60C20DC 60V 20A max, 30A continuous 500ms19’’/8U
APS 60C20.1DCP 60C20.1DC 60V 20A max, 40A continuous 500ms19’’/8U
APS 60C30DCP 60C30DC 60V 30A max, 36A continuous 500ms19’’/8U
APS 60C30.1DCP 60C30.1DC 60V 30A max, 60A continuous 500ms19’’/8U
Basic Equipment
Simulator, test cable, power cord, fuse, factory test report, warranty report and user manual
Optional Accessory
1. PC control software AUTO Lab
With PC installed WIN XP and WIN7, it can be easily operated to make the measurement, based on the customized test program. It can identify any device for AUTO Lab test with automatic configuration. It can easily generate test reports.

28 other products in the same category: