> EMC Test Equipment>Transient Generators>Automotive Transient Immunity Generators>New 3ctest TIS 700 EFT/Burst/Micropulse Generator for ISO 7637

Automotive Transient Immunity Generators

Quick Links

Information

Viewed products

New 3ctest TIS 700 EFT/Burst/Micropulse Generator for ISO 7637 View larger

New 3ctest TIS 700 EFT/Burst/Micropulse Generator for ISO 7637

New

  • Economic Alternative for Automotive EMC Compliance
  • Meets ISO 7637 Pulses 1, 2a, 3a aand 3b
  • Built-in EFT/Burst generator module
  • Built-in Micropulse generator module (ISO 7637, JASO, SAE and NISSAN)

More details

Typically In Stock

Request Quote

Request Quote/More Info

PDF Downloads

TIS 700 Data Sheet

PDF Downloads (780.5k)

Specifications

InputDC voltage from APS, APG or other DC source
Electrical Fast Transients
EFT/Burst module for test pulses 3A/3B
ParameterValue
Test Voltage25 - 700 VOlts
Rise time5ns ± 30%
Pulse duration150ns ± 45ns
UCS 200N ModelsN/A
VerificationAs per Annex C of ISO 7637-2:2011 into 50ohm and 1,000ohm load
Source Impedance50ohm
PolarityPositive/negative (Pulse 3b/3a)
Trigger of burstsAutomatic, manual, external
Burst duration0.1ms - 99.9ms
Repetition rate50ms - 999ms
Spike frequency0.1kHz - 200kHz
Test duration1 s - 50000 seconds
OutputsDirect Via 50ohm-coaxial connector (for tests using e.g. a capacitive coupling clamp); Coupling mode To the battery line (supply lines); CRO trigger 5V trigger signal for oscilloscope
Micropulse
Micropulse module for test pulses 1, 2A and 6
ParameterValue
Test voltage30 - 600 Volts
ISO PULSE 1 (12V)0.5us - 1us. 1.5us - 3us. No load, 1ms 土 20% no load 1ms 土 20% 50 ohm matching load 2ms 土 20% no load
ISO PULSE 1 (24V)0.5us - 1us. 1.5us - 3us. No load, 1ms 土 20% no load 1ms 土 20% 50 ohm matching load 2ms 土 20% no load
ISO PULSE 2 (12V/24V)0.5us - 1us. 1.5us - 3us. No load, 1ms 土 20% no load 1ms 土 20% 50 ohm matching load 2ms 土 20% no load
Triggerautomatic, manual, external, battery switch
OutputDUT supply +/- Central DUT output; Coupling To the battery +line; Decoupling Via diode and battery supply switch

Test Equipment Description

The 3ctest TIS 700 series for automotive transient generation unifies the capabilities of an EFT/Burst simulator, a micro pulse simulator and the required coupling network in one box. The TIS 700 series are equipped to meet all international and car manufacturer specifications. The current of built-in coupling networks range up to 100 Amps depending on the model. The built-in coupling network can be used and controlled by any unit od the LDS200 series, APG series and APS series. For tests beyond standards requirements the waveform parameters of the micro pulse generator can be varied in a wide range by means of the freestyle mode.

3ctest TIS 700 Includes:

  • ISO 7637 Simulator Pulse 1, 2a and 3
  • Power Cord (120V AC)
  • User Manual
  • Calibration Certificate

Associated EMC Test Equipment

30 other products in the same category: