> Anechoic Chambers>Positioning Equipment>Antenna Test Turntables>Maturo CW 13 Cable Winch

Antenna Test Turntables

Quick Links

Information

Viewed products

Maturo CW 13 Cable Winch View larger

Maturo CW 13 Cable Winch

New

  • Designed to lift up loads above the EUT inside a magnetic absorption chambers
  • All metal parts of the CW are mounted outside the chamber on top of the chamber structure
  • Only three non-conductive ropes are feed-trough the chamber ceiling
  • Controlled by a handheld control unit outside the SAC

More details

Request Quote

Request Quote/More Info

PDF Downloads

Data Sheet

PDF Downloads (154.24k)

Test Equipment Description

The Cable Winch CW 13 is designed to lift up loads above the EUT inside a magnetic absorption chambers. All metal parts of the CW are mounted outside the chamber on top of the chamber structure. Only three non-conductive ropes are feed-trough the chamber ceiling.

The Cable Winch is controlled by a handheld control unit outside the SAC.

Technical Data
Number of ropes3
Net load of one rope1420 kg (1420 daN)
Max. load for the objects under test2 tones (2000 daN)
Lifting range from Limited with positioning switches0 to 13 m
Positioning speed adjustable up to max.7 m/min.
Lifted with three electrical non-conductive cables
Circular cross diameter of cables9 mm
Max. tensile load80 kN
Operating Voltage400 V, 50 Hz, three-phase
Rated power2.9 kW
Rating current18 A
Rating moment57.8 Nm
Starting current32.4 A
Starting moment104.1 Nm
Braking moment100 (Disk brake)
Temperature range+10 °C...+35 °C

30 other products in the same category: