AH Systems ICP-622 RF Current Injection Probe, 1 MHz - 500 MHz

The AH Systems ICP-622 current injection probe is used to couple large RF currents from 1 MHz to 500 MHz into signal and power circuits to meet specific testing requirements.

Injection Current Probes are used to inductively couple large RF currents into conductors passing through their aperture. The conductors are signal, control and power circuits of equipment under test for conducted susceptibility or immunity. This injection current probe is used to couple large RF currents from 1 MHz to 400 MHz. The CW input power rating of this injection current probe is 200 watts for a duration of 30 minutes.

Typical specifications requiring the use of current injection probes are:

• IEC 61000-4-6
• Mil-Std 461
• DO-160
• EN-50081-1
• IEC 801-6
• TR-EOP-000063

AH Systems ICP-622 Features:

• Broad Frequency Range of 1 MHz - 500 MHz
• Measures currents on 50 Hz, 60 Hz and 400 Hz powerlines
• Individually Calibrated (Insertion Loss and Transfer Impedance calibration included)
• Split Type Clamp-on Design
• Current injection source as well as a sensitive monitoring probe.
• Insertion Loss: 4 to 16 dB
• Transfer Impedance: 16 to 31 dBW
• Max Input Power: 200 Watts
• Connector: N-type, Female
• Aperture: 1.5" (38mm)