Loop Antennas

Quick Links

Information

Viewed products

Com-Power Model AL-130R Active Loop Antenna 9 kHz - 30 MHz View larger

Com-Power Model AL-130R Active Loop Antenna 9 kHz - 30 MHz

New

  • Frequency Range: 9 kHz - 30 MHz
  • Built-in, Battery Operated Preamplifier
  • Fiber Optic Remote Monitor/Control option
  • Electric or Magnetic Field Measurements
  • Individual Calibration per IEEE 291 Included

More details

Typically In Stock

Request Quote/More Info

Specifications

Frequency Range9 kHz to 30 MHz
Antennas
Loop Antennas
ParameterValue
Antenna Factor (1 Meter)E-Field Antenna Factors 13.4 to 16.4 (average: 14.9) [dB(m-1)] Antenna Factor Variation ±1.5 dB
Impedance50 Ohms
ConnectorBNC-type(female)
Dimensions20.1” x 19.7” x 10.6” [51 x 50 x 27 cm]
Battery(preamplifier) 6 V DC NimH (rechargeable) Average Battery Life 10-12 hours
Weight5.5 lbs. [2.5 kg]

Test Equipment Description

Also known as Magnetic Loop Antenna, the Com-Power AL-130R is compliant with CISPR 16-1-4. It is ideal for emissions measurements as required by various EMC standards such as FCC 18, CISPR 11, CISPR 13, CISPR 14, CISPR 32 and many more. The built-in, low-noise preamplifier, increases overall measurement sensitivity as well as the overall signal to noise ratio. As per ANSI C63.4-2014, the use of active loop antenna for compliance testing is permitted in a non-sheilded environment ONLY if the saturation indicator is continuously monitored during the course of testing. Com-Power’s Remote Antenna Interface (RAI-100) comes in very handy for this application. It is a compact controller which can be used to enable/ disable RF measurement circuit and monitor saturation and battery low conditions remotely via a fiber optic cable up to 30 mtrs in length.

Technical Specifications:

  • Frequency Range: 9 khz to 30 MHz
  • Loop Size: 19" x 19" (0.5 m x 0.5 m)
  • Nominal Impedance: 50 Ω (output port)
  • Batttery Type: 6 VDC NimH (rechargeable)
  • Average Battery Life: 10 - 12 Hours
  • E-Field Antenna Factors: 13.4 to 16.4 (average: 14-9) [dB(m-1)]
  • Saturation Level: >1 V/m / >120dBμV/m (>2.65 mA/m) / >68.5 dBμA/m
  • Antenna Factor Variation: ±1.5 dB
  • RF Connector: BNC-type (female)
  • Specifications: ANSI C63.4, CISPR, EN, ETSI, etc.
  • Dimensions (H x W x D): 20.1" x 19.7" x 10.6" [51 x 50 x 27 cm]
  • Weight: 5.5 lbs. [2.5 kg]

Associated EMC Test Equipment

30 other products in the same category: