Preamplifiers

Quick Links

Information

Viewed products

Com-Power PAM-6000 1 - 6 GHz High Gain Preamplifier - EMC Test Equipment View larger

Com-Power PAM-6000 High Gain EMC Preamplifier, 1 - 6 GHz

New

  • Broadband Frequency Range of 1 GHz - 6 GHz
  • Low Noise Figure: 4 dB typical
  • High Gain: 30 dB
  • Low VSWR: 2:1 Input/1.8:1 Output
  • Output Power: +13 dBm @ 1 dB compression
  • Flatness: ± 1.5 dB
  • Reverse Isolation: Greater than 30 dB
  • Impedance: 50 Ohms
  • Connector: N-type (f)

More details

Typically In Stock

Request Quote/More Info

Specifications

Frequency Range1 GHz - 6 GHz
Gain30 dB typical (± 1.5 dB flatness)
Application/Test TypeIncreases system sensitivity enhancing the capability of measurement system to measure low level signals for EMI / EMC Measurements
Input10 VDC, 2 dBm
Maximum Continuous Power+13 dBm @ 1 dB compression
Connector50Ω N-Type (f)
Dimensions7.5 x 5 x 3 inches
VSWR2.1:1 Input/1.8:1 Output
Weight3.3 lbs. (1.5 kg)

Test Equipment Description

The Com-Power PAM-6000 1 - 6 GHz High Gain Preamplifier is intended for improving measurement system sensitivity during EMC compliance testing. It has a frequency range of 1 GHz to 6 GHz. It has gain of 30 dB. Therefore, It amplifies the signals that were previously hidden below the noise floor of the EMI receiver so that it can be seen and measured. The PAM-6000 has a small gain variation of ±1.5 dB. It can be powered by the rechargeable NimH batteries (included) when an external power source is not available.

Com-Power PAM-6000 Features:

  • Broadband Frequency Range of 1 GHz - 6 GHz
  • Low Noise Figure: 4 dB typical
  • High Gain: 30 dB
  • Low VSWR: 2:1 Input/1.8:1 Output
  • Output Power: +13 dBm @ 1 dB compression
  • Flatness: ± 1.5 dB
  • Reverse Isolation: Greater than 30 dB
  • Impedance: 50 Ohms
  • Connector: N-type (f)

Associated EMC Test Equipment

19 other products in the same category: