RF Field Strength Probes & Meters

Quick Links

Information

Viewed products

Amplifier Research...
2 V/m to 1000 V/m Laser powered...
R&S EMCPC/ELEMI-E...
Cost-efficient Flexible and scalable...

View larger

Amplifier Research (AR) FL8040 Kit E-Field Probe, 20 MHz - 40 GHz, CW & Pulse

Condition New

2 V/m to 1000 V/m
Laser powered
FI8000 laser Probe Interface

The EMC Shop

More details

Typically in Stock

Specifications

Frequency Range	100 kHz to 6 GHz
Standards Met	IEC/EN 61000-4-3
Application/Test Type	Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF rooms for radiated immunity testing.
RF Field Probes E-Field
Parameter	Value
Sensors	Three monopoles
Measurement Mode	X-Y-Z and Composite
Sampling Rate	20 msec/up to 50 samples per second, USB and GPIB only
Digital Filtering	N/A
Battery	N/A
Operation Time	Laser Powered - Seemless
Recharging Time	N/A
Flatness	Frequency correction OFF: ±1.0 dB @ 10 MHz Frequency correction ON: typically 0.8 dB, 100 kHz–1 GHz 1.4 dB, 1 GHz–6 GHz
Dynamic Range	0.5–800 V/m, 100 kHz–1 GHz; 0.5–600 V/m, 1 GHz–4 GHz; 0.7–800 V/m, 4 GHz–6 GHz (Single Range)
Overload	1,000 V/m CW 10,000 V/m Peak
Internal Data Memory	None
Communication	USB, IEEE-488 (GPIB), RS-232 (serial), Fiber-Optic Serial
PC Software	Optional Software for setup, automation and monitoring available.
Temperature Reading Resolution	None
Resolution	0.01 V/m
Dimensions	3.18 cm (1.25 in)
Weight	62.5 g (2.2 oz)

Test Equipment Description

The Amplifier Research FL8040 is an advanced laser-powered Electric Field Probe, and associated Kit designed specifically for EMC radiated immunity test applications. Each Field Probe is an electrically small, separable axis sensor capable of measuring both continuous wave and pulsed electric fields. There are a total of five Field Probes available, each with a unique bandwidth, sensitivity, and dynamic range.

The field probe kits contain everything needed to operate its associated Field Probe. Remote control and laser power for the Field Probe is provided by the FI8000 Laser Probe Interface. A set of 20- meter fiber-optic extension cables and fiber-optic mating adapter are also provided with the kit. The use of a laser to deliver power-over-fiber (PoF) allows for continuous operation without recharging or replacing batteries. Additionally, this provides excellent RF isolation for the control system. An ortho-angle mount and adapter foot are provided for ease of mounting in common orientations. When rotated about its ortho-angle mount, the probes provide excellent isotropic response. Attention was given to the mounting geometry and remote command set for the FL8000 series kits to allow seamless substitution with the legacy field probe kits.

Correction factors from an accredited ISO 17025 calibration lab are provided with each Field Probe. These factors can be loaded into a model FM7004A Field Monitor (sold separately) to automatically correct the probe readings at user-specified frequencies. When correction factors are applied, the true accuracy of the Field Probe can be realized. The export classification for this equipment is EAR99. This equipment is controlled for export in accordance with the U.S. Export Administration Regulations. Diversion contrary to U.S. law is prohibited.

Amplifier Research (AR) FL8040 Features:

Capable of measuring both continuous wave & pulse electric fields.
Use of laser to deliver powerover-fiber allows continuous operation without recharging or replacing batteries.
Correction factors from accredited ISO 17025 lab.