Quick Links

Information

EN/IEC 61000-4-5

The EMC Shop stocks Combination Wave/Surge generators capable of outputting up to 30,000 Volts to simulate the most vigorous of lightning strikes.

Rent, buy or lease EMC testing equipment to certify and comply to EN/IEC 61000-4-5: Surge Immunity. The EMC shop specializes in conducted immunity and compliance testing.

 

Get Application Support, Pricing, Lead Time and More: Contact Form

EN/IEC 61000-4-5 Surge Test Equipment

  1. Combination Wave/Surge Generator
  2. 3 Phase Coupling/Decoupling Networks
  3. Telecom/Data line Couplers

EN/IEC 61000-4-5 Combination Wave Generator Diagram

EN/IEC 61000-4-5 Test Setup

EN/IEC Test Setup for Combination Wave/Surge Immunity Compliance

EN/IEC 61000-4-5 There are 66 products.

per page
Showing 13 - 24 of 66 items
    • Compatible with other Surge Generators
    • CDN for 1.2/50 pulse as per IEC 61000-4-5 edition 3
    • CDN for up to 8 wire unshielded asymmetrical communication lines
    • Coupling to 1, 2 or 4 pairs
    • Transfer Rates: 10MBit/s
    Typical Lead Time: 4 - 6 Weeks
    Request Quote/More Info
  • Quick view
    $14,400.00 $48,000.00 -70%
    • Standalone tester for 10 / 700us pulse according to IEC 61000-4-5
    • Test voltage up to 10kV
    • Compliant with ITU-T standard for enhanced test level
    • Complies with FCC part 68 (Surge B pulses)
    • Integrated CDNs for 2-wire and 4-wire applications
    • Manual operation
    • Standard test procedures
    • RS232 and GPIB interfaces
    $14,400.00 $48,000.00 -70%
    Reduced price!
    In Stock
    Request Quote/More Info
    • Fully IEC 61000-4-5 compliant
    • 1.2/50us - 8/20us; IEC coupling
    • Surge pulses 500 Volts to 10,000 Volts
    • Single phase CNV 501S4 1PH/16A coupler included standard (Inquire for 3 Phase)
    Typically In Stock
    Request Quote/More Info
    • Rentals Ship Immediately
    • System Configuration:
      • E103 Controller (fiber-interface for remote control)
      • E411 EFT/Noise Burst Simulator to 4.4 kV (IEC 61000-4-4)
      • E501B Surge Simulator to 6.6 kV (IEC 61000-4-5, ANSI C62.41 Cat. B and UL 1449 at 3kA)
      • E4551A Single Phase Surge/EFT Coupler 250V rms (typ. 15 Amps)
      • Input voltage: 100V to 240VAC
      • Input Current: 3.5A at 100 V; 1.5A at 240 V
    In Stock
    Request Quote/More Info
  • Typically In Stock
    Request Quote/More Info
    • Automated test modes, software assisted test preparation, predefined test routines and visual aided test setups
    • Automatic generation of test report, including test parameters, test setup and test result
    • Compliance and pre-compliance testing of electrical products
    • Includes
    • CE marking
    • Product development and debugging
    • Compliance testing of telecom and wireless devices
    Typically In Stock
    Request Quote/More Info
    • Combination wave
      • Voltage: 1,2/50us
      • Current: 8/20us
    • Impulse voltage: 200V - 4.2kV
    • Impulse current: 100A - 2.1kA
    • Maximum impulse repetition rate 12 per minute
    • Positive, negative and user definable alternating polarity
    • Integrated CDN for 16A at 264Vac and 110Vdc
    • Impulse voltage, current and EUT current measurement
    • Test parameter ramp functions
    • Phase angle synchronization
    Typically In Stock
    Request Quote/More Info
    • Complies with and exceeds requirements of IEC/EN 61000-4-4, -5, -11, -12, -29 and ANSI C62.41 & 45.
    • Surge Combination Wave 6.6 kV
    • Surge Ring Wave 6.6 kV
    • EFT/Burst 4.8 kV
    • Dips Interrupts and Variations
    • Single phase 16 A CDN
    • 7.2" color display, touch panel, wheel with step size keys, Start-Stop-Pause keys and virtual keypad for easy and intuitive testing
    In Stock
    Request Quote/More Info
  • In Stock
    Request Quote/More Info
    • Rentals Ship Immediately
    • Perform Precompliance To:
    • Monitor surge voltage and current at the output terminals 
    • Creates custom test protocols
    • Built in 1 Phase Coupler, 50-277 VAC, 16 Amps (100 VDC,10A) Maximum
    • Still serviced by The EMC Shop
    Typically In Stock
    Request Quote/More Info
    • All relevant parameters in one display
    • Stand-alone equipment for automated EMC test without a PC
    • Magnetic field up to full levels
    • Protocol when needed
    • The GENECS Software is one of the most sophisticated software for transient immunity tests
    • Dialogue line language can be chosen
    In Stock
    Request Quote/More Info
  • Typically In Stock
    Request Quote/More Info
Showing 13 - 24 of 66 items