> Compliance Standards>International (IEC/EN)>EN/IEC 61000-4-5

Quick Links

Information

EN/IEC 61000-4-5

The EMC Shop stocks Combination Wave/Surge generators capable of outputting up to 30,000 Volts to simulate the most vigorous of lightning strikes.

Rent, buy or lease EMC testing equipment to certify and comply to EN/IEC 61000-4-5: Surge Immunity. The EMC shop specializes in conducted immunity and compliance testing.

 

Get Application Support, Pricing, Lead Time and More: Contact Form

EN/IEC 61000-4-5 Surge Test Equipment

  1. Combination Wave/Surge Generator
  2. 3 Phase Coupling/Decoupling Networks
  3. Telecom/Data line Couplers

EN/IEC 61000-4-5 Combination Wave Generator Diagram

EN/IEC 61000-4-5 Test Setup

EN/IEC Test Setup for Combination Wave/Surge Immunity Compliance

EN/IEC 61000-4-5 There are 66 products.

per page
Showing 49 - 60 of 66 items
  • Quick view
    • 10" Color Touch Screen
    • Intelligent HV Mains Charging Mode
    • Automatic Control System, Failure Analysis and more
    • Built in Single or Three Phase CDN
    • 300V - 10kV (±10%) Output Voltage
    • Configure with 10/700 Telecom Wave if Required
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Decoupling resistors 200 Ohm
    • 10/700us telecom impulses and combination wave 1.2/50us - 8/20us impulses
    • 100kHz ring wave impulses
    • Breakdown avalanche diodes and gas arrestors as protection elements
    • Up to 4 wires can be tested
    • Signal Bandwidth up to some 10MHz
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Rent the Keytek ECAT System
    • System Configuration:
      • E103 Controller (fiber-interface for remote control)
      • E411 EFT/Noise Burst Simulator to 4.4 kV (IEC 61000-4-4)
      • E501B Surge Simulator to 6.6 kV (IEC 61000-4-5, ANSI C62.41 Cat. B and UL 1449 at 3kA)
      • E4551A Single Phase Surge/EFT Coupler 250V rms (typ. 15 Amps)
      • Input voltage: 100V to 240VAC
      • Input Current: 3.5A at 100 V; 1.5A at 240 V
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 10/700us impulse shape up to 7.4kV
    • Compliant to ITU K.44, IEC 61000-4-5 Data lines and ITU K.20, K.21 & K.45 Telecom Interfaces 
    • Fully automatic coupling network
    • Current limit resistors 25 Ohm, 50 Ohm, 75 Ohm and 100 Ohm
    • Coupling elements user changeable, gas arrestor 90V are standard
    • Selected resistors and coupling elements clearly shown on the PCD 120 front panel
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Compliant with IEC 61000-4-4 & 5
    • Universal teminals- no special plugs required
    • Safety HV plugs and terminals
    • Manual/programmable EUT power ON/OFF control
    • Short term overstress capability

     

     

    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Complies with and exceeds requirements of IEC/EN 61000-4-4, -5, and ITU-T.K series
    • Surge Combination Wave 6.6 kV
    • Surge Telecom 10/700 7.7 kV
    • EFT/Burst 4.8 kV
    • 7.2" color display, touch panel, wheel with step size keys, Start-Stop-Pause keys and virtual keypad for easy and intuitive testing
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Price are Per Month
    • PerformPrecompliance To:
    • Monitor surge voltage and current at the output terminals 
    • Creates custom test protocols
    • Built in 1 Phase Coupler, 50-277 VAC, 16 Amps (100 VDC,10A) Maximum
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Standalone tester for 10/700 µs pulse as per IEC 61000-4-5
    • Complies to ITU-T
    • Complies to FCC part 68 (Surge B pulses)
    • Built-in CDNs for 2-wire and 4-wire applications
    • Manual operation
    • Standard Test routines
    • USB and GPIB interface
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Standalone tester for 10/700 us pulse as per EN/IEC 61000-4-5
    • Test voltage up to 10 kV
    • Complies to ITU-T for enhanced level testing
    • Complies to FCC part 68 (Surge B pulses)
    • Built-in CDNs for 2-wire and 4-wire applications
    • Manual operation
    • Standard Test routines
    • USB (optical link) and GPIB interface
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    Request Quote
    Typical Lead Time 6 - 8 Weeks
    Request Quote/More Info
    Add to Compare
  • Quick view

    • See the EMCPro Plus here
    • Perform Precompliance To:
      • IEC 61000-4-5 Surge Testing (6kV)
      • EFT testing to IEC 61000-4-4 limit (4kV)
      • PQF Dips and Interrupts to IEC 61000-4-11
    • Monitor surge voltage and current at the output terminals 
    • Creates custom test protocols
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
Showing 49 - 60 of 66 items