Schloder CDN ABCL-20 Decoupling Clamp

Decoupling Clamp for immunity according to IEC / EN 61000-4-6 Ed. 4.0

The CDN ABCL-20 Decoupling Clamp, also known as Absorbing Clamp or Attenuation Clamp, is recommended for additional decoupling when an EM-Clamp is used for immunity testing according to IEC / EN 61000-4-6. It shall be installed on each cable between EUT and AE except the cable under test, preventing other devices or systems from being affected by the testing procedure.

Typical decoupling factor

Typical insertion loss in 50 Ohm system

Typical clamp impedance (transformed)