Viewed products
100 Ω Connector For RF Disturbances...
Broad Frequency Range of 1 GHz to 4...
New
Warning: Last items in stock!
Availability date:
100 Ω connector for RF disturbances 10 kHz – 230 MHz
The disturbing signal coming from the test generator is injected on to screened and coaxial cables via a 100 Ω resistor (even if the shield is ungrounded or grounded at one end only). In between the auxiliary equipment (AE) and the injection point, a decoupling circuit shall be inserted as close as possible to the injection point. To increase decoupling and to stabilize the circuit, a ground connection shall be made from the screen of the direct injection device´s input port to the ground reference plane.
Specifications | |
Electrical Data | CDN D 100 |
Frequency range (RF In) | 10 kHz – 230 MHz |
Common mode impedance (IN/OUT) | 100 Ω |
Power Rating (RF In) | 6 W (continuous) |
Connector Out | Alligator clip; max. cable diameter 20 mm (30 mm on request) |
Connector In | BNC |