Accessories

Quick Links

Information

Viewed products

Schloder SFT 415 - CS...
For Capacitive Coupling Clamp Burst...

View larger

Schloder SFT 415 - CS Calibration Set for CCC

Condition New

For Capacitive Coupling Clamp Burst
IEC 61000-4-4, 2012
Transducer Plate with Connection Adapter
Optionally 50 ohm Attenuator

The EMC Shop

More details

PDF Downloads

Schloder SFT 415 - CS Data Sheet

PDF Downloads (114.9k)

Test Equipment Description

Calibration - Set

The capacitive coupling clamp is specified in the standard IEC / EN 61000-4-4, chapter 6.4. It provides the ability of coupling the fast transients / bursts to the circuit under test without any galvanic connection to the terminals of the EUT´s ports, shielding of the cables or any other part of the EUT.

With the release of the standard IEC 61000-4-4, 2012 the capacitive coupling clamp is also to verify at their characteristics and to calibrate.

Calibration of the capacitive coupling clamp

Required accessories:

Calibration-Set (SFT 415-CS)
Transducer plate with connection adapter Support for the measurement attenuator
Measurement attenuator 50 Ohm (SFT 450-1)

Measurement equipment that is specified as suitable to perform the calibrations defined in IEC 61000-4-4, chapter 6.2.3 (Burst generator verification) shall also be used for the calibration of the characteristics of the capacitive coupling clamp.

Technical Data
Transducer Plate with Connection Adapter
Material	stainless steel plate, conducting
Dimension	120 mm x 1050 mm
Material thickness	0,5 mm
Isolation	dielectric foil with thickness of 0,5 mm, all around
Insulation voltage	min. 2,5 kV – on all sides
Connection for 50 ohm	Fischer HV-female connector Other connectors (BNC HV) on request
Total length Set	1085 mm (with adapter)
Weight	720 g
Working temperature	0 - 40° Celsius
Relative humidity	0 - 60%